Photos Swaro + PRS tripod

[96C]

It's been a while since I put any pics up so.

Got this PRS (Precision Rifle Solutions) medium tripod for Christmas from my partner, it's a vital piece of gear that's earnt its place in my field kit.

Three stage height adjustment in the legs and then the centre post extends up through the middle. The ball mounted rifle cradle is adjustable for angle and direction with a seperate tension knob.

Shooting off this tripod as opposed to my pack is MUCH easier and more controlled as it's a consistant base to work from, not having crap shift around or slide off. Great for shooting up / down hill and shooting / spotting from a seated position.

The SSP2 with it's flat top section allows the spotter / LRF to sit up there with no issues. The top 10 cm approx of the inner height adjustment tube is seperated with a threaded part of sorts allowing you to rotate the top section by itself letting you pan the spotter / LRF - this is an added feature that makes a huge difference when scanning.

Danel and his wife make these tripods, thanks for an awesome product. Happy easter lads.
J

 

[SigSense]

Re: Swaro + PRS tripod

Looks good, and great camo.

 

[wadcutter]

Re: Swaro + PRS tripod

Good bit of kit.
If you don't mind, what's it cost in Aussie dollars?

 

[elkkid3]

Re: Swaro + PRS tripod

Sweet setup.

 

[Impact]

Re: Swaro + PRS tripod

good kit mate !

 

[vietboy1st]

Re: Swaro + PRS tripod

Is that a multicam painted on the spotter's support?

 

[AlabamaShooter]

Re: Swaro + PRS tripod

Nope its not painted, Danel (platypus here on the Hide) puts a cordura cover over the aluminum cradle that is attached to the tripod.

 

[Platypus]

Re: Swaro + PRS tripod

J
Thank you for the great pictures and if you do not mind I would like to add them to the photo gallery on the web site. If ya'll have any questions about the SSP cradles or tripods do not hesitate to PM, email [email protected] , or give me a call 281-541-1549. The first cradle I built years ago in the Marine Corps was from a solid block of aluminum and machined into a channel then covered in a green sock and 90mph tape, definitely function over fashion and I still use it today. The cordura cover not only looks better but allows the rifle to recoil without hanging up on tape residue and adds to the cushion that is under the cover. Another benefit to the cover is it helps reduce noise when manipulating the rifle in the cradle. The covers also keep the cradle from generating shine as even an anodized metal will give off a shine. Plus they can be had in OD, coyote, black, and multi-cam. Thank you again for the great pictures and kind words.

Danel

 

[96C]

Re: Swaro + PRS tripod

Shot you a PM brother + of course you can use the pics.
I took them to help good people find better kit, if they can do that then they've served their purpose.