Rifle Scopes SWFA 1-6 Switchview lever

Howa4AU · Apr 22, 2013

Is there one out there yet or has anybody found one that works with the 1-6?

hk dave · Apr 22, 2013

The one made for the 1-4 works on the 1-6... not perfectly, but it does fit well enough to make it work.

Stormshadow · Apr 22, 2013

Have used the 1-4 switch on my 1-6 w/out issue so far. There is a post in the tax day thread that says the 5-20 HD switch works as well on the 1-6

NoFail · Apr 23, 2013

I've decided to just wait for specific 1-6 lever when they come available. I don't suppose it will be as long a wait as was for the scope itself? But if I can wait 9 months or whatever it was for the scope, I can wait for this lever thing. Do really need it though, mag so stiff.

Howa4AU · Apr 23, 2013

I would prefer one specific to the 1-6 but may have to try one mentioned. Power ring is pretty stiff and I use this scope on a 3 gun rifle. Need to be able to switch it easier.

hk dave · Apr 23, 2013

For 3 Gun, the lack of a cat tail would suck with this scope. The mag ring is stiff.

thezoltar · Apr 23, 2013

I just moved the throw lever from my 5x20 to my 1x6 and I can say it is a perfect fit. I guess I'm going to have to order another one!

J Mack · Apr 23, 2013

The dedicated one to six lever will be worth the wait.
It’s a single screw low profile design allowing it to be used on a wide variety of mounts.
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKerning/> <w

ontFlipMirrorIndents/> <w:OverrideTableStyleHps/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->

NoFail · Apr 23, 2013

^ do you know when it will be available?

J Mack · Apr 23, 2013

NoFail said:
^ do you know when it will be available?

I would think very soon but I would check with SWFA for an official word.
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKerning/> <w

ontFlipMirrorIndents/> <w:OverrideTableStyleHps/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->

bbenson9 · Apr 28, 2013

When I changed out my 1-4x for the 1-6x I moved over the throw lever. Looks and works just fine.

Kiba · Apr 30, 2013

The 5-20 throw lever fits perfectly on the 1-6. Oddly enough the 5-20 lever fits the 1-6 better than the 5-20; the single slotted screw in the magnification ring of the 1-6 is further forward and completely clears the lever whereas the single slotted screw on the 5-20 magnification ring sits partially under the lever when installed.

dieselfrog · May 9, 2013

Bumping this thread in case anyone has any updated info on the 1-6 switchview release date. I'm on the fence on if I want to order the 5-20 or wait for the proper 1-6 version.

X-Navy · May 9, 2013

Just got the 5-20 switchview for my 1-6, no issues with fitment at all. SWFA should just repackage this for the 5-20 and 1-6.

Howa4AU · May 10, 2013

I'm going to go ahead and try the 5-20 model. Since I have a 5-20 from the Facebook buy worst case is I can use it on the 5-20 and get the 1-6 when available.

avking · May 11, 2013

MGM shipped a large qty of the 1-6 levers to SWFA a week ago. Need to wait for them to arrive and added to the site.

WACADOO · May 16, 2013

I just ordered one!!!!

Dallas4rceMarine · May 16, 2013

the 5-20 lever will work, however the 1-6 specific throw lever will be available soon!

WACADOO · May 16, 2013

It's available now.

WACADOO · May 16, 2013

Stock # - SWVSSHD146

WACADOO · May 16, 2013

SWFA SS Switchview Throwlever

Hammertime · May 16, 2013

WACADOO said:
It's available now.

Thanks for the heads up, will try to order tomorrow.

NoFail · May 16, 2013

Oh thanks, wacadoo, I'm on it!!

Edit
I'm glad I waited and got the SS 1-6 specific design. Order placed...

Watch Out for Scammers!

Rifle Scopes SWFA 1-6 Switchview lever

Sergeant

Optics Fiend

Full Member

Sergeant

Sergeant

Optics Fiend

Private

Private

Sergeant

Private

Private

Supporter

Private

Private

Sergeant

Private

Private

Sergeant

Private

Private

Private

Sergeant

Sergeant

Similar threads