TERMINUS Zues QC Action

[OneMoreGun]

So when will Terminus make a PPC diameter bolt face for the Zues action?

I know a dozen plus shooters shifting to 6ARC and opening up a .223 bolt face has its own issues.

Has anyone heard if it in the works or do we need to take a poll on who is interested?

 

[Feniks Technologies]

He sells out of everything he makes already and can’t keep up.

So, I wouldn’t hold my breath.

 

[schmi015]

that might make for a fun plinker…

 

[OOB]

So when will Terminus make a PPC diameter bolt face for the Zues action?

I know a dozen plus shooters shifting to 6ARC and opening up a .223 bolt face has its own issues.

Has anyone heard if it in the works or do we need to take a poll on who is interested?

Sure would be nice. I know more than a dozen myself.

 

[Csafisher]

Why the ARC over a 6GT? Factory ammo is the only reason I could see. I have a Zeus and that’s the route I’ll be going. I doubt he’ll be making PPC bolts any time soon.

 

[OneMoreGun]

For me factory ammo and support when I'm short on time and I don't feel like loading. Another positive is barrel life and virtually no recoil.

 

[st1650]

Not a bad idea. I significantly reduced my reloading for 6.5 creed and run mostly factory Sako Scenar 136 and Hornady 147s due to the component shortage that will certainly last a year and keep my powder for my barrels that don’t have factory offerings. Both factory offerings shoots 1/2 and better than 1/2 moa and even though the ES is more than I feel acceptable for this game, it has very little impact inside of 600 yards which is where I play more of the time.

I’m certainly entertaining a 6ARC in the near future and plan to shoot factory until the supply comes back to a reasonable level. I have a spare Nuke 1.1 and could simply get a 6ARC BF as they are very reasonably priced.

 

[Franko]

I asked Joel a few months ago and he said he had no plans on offering a 6 ARC boltface. Maybe he will change his mind if things slow down for him and he gets some breathing room, if not LRI will open up a .223 boltface for you but that could get pricey if they have to custom fab an extractor.

I'm thinking a 6 ARC bolt gun could be fun but am still on the fence.

 

[DJL2]

Why not get a Valk bolt face and go that direction? Factory ammo for the time being, likely not giving up anything performance wise… can still swap bolts and barrels later if/when desired.

 

[Franko]

Why not get a Valk bolt face and go that direction? Factory ammo for the time being, likely not giving up anything performance wise… can still swap bolts and barrels later if/when desired.

Terminus doesn't make ARC or Valk bolts.

 

[DJL2]

Terminus doesn't make ARC or Valk bolts.

Well, I’m easily confused… maybe I thought they were Lone Peak? Nevermind me…