"The Creed" powder by shooters world

[trlrman]

Anyone using or tried it ? Did a search and nothing came up so thought I would ask .

 

[RegionRat]

Have not tried it, and nobody I know personally has yet either.

Their page says similar to RE-15, but it is pull down from a cannister grade of Rheinmetall-Denel (RDM) S341
Here you will find load data:
https://shootersworldpowder.com/data-table/

Here is the Rheinmetall page
https://www.somchemreload.com/propellants/s341

The RDM stuff is generally pretty good.

Keep in mind, the stuff you will get is pull down powder and you will need to do your load work-up carefully to see how your batch behaves compared to any other data you find.

 

[trlrman]

At less than $40 a pound figured I would roll the dice .
Thank you for the word of caution !
Will start light in hopes of a low node .

 

[slodsm]

I’m almost out of my stash of rl16 I built up in 2019. Grafs has no hazmat no shipping right now so I grabbed 8lbs. We shall see how it does.

 

[Reaper 31]

Sorry to bother but has anyone happened to give the powder a try?
Thanks

 

[trlrman]

I am going to give it another shot next month .
I loaded 20 and am not impressed so far .
Hopefully others might chime in ?
That was with 109's , I am breaking in a new barrel now so may load some 90 eld's for giggles ?

 

[slodsm]

I haven’t had time to load it yet. I will probably do it soon on 6mm creedmoor. My rl16 is almost gone so I need a new load. My dasher shoots too well with varget for me to waste barrel life doing a work up on something that I can’t imagine shooting better than the varget.

 

[Doc68]

I'm gonna load up some round this weekend starting at 36.6-38.7 in .3 increments then load 38.9 and 39.1. See what I'm getting as far a velocity and pressure signs. I'm going to load 2.820" with Peterson brass 2x fired brass and Remington BR primers.

I'll show what I got when I can.

Doc