Thin cheek piece cover for sentinel?

[Lrdchaos]

Looking for a thin cheek piece cover for my Kmw sentinel. I have a triad stockpack, and even with my adj. piece all the way down the stockpack raises my eye to high. I’m not really wanting to buy new rings, so looking for a suggestion.

 

[B-P-UU]

https://godagrip.com/cheek-pads-2/

They sell thin sheets as well you can cut custom sizes. Good strong adhesive that doesn't damage paint or stocks.

 

[THEIS]

Hi,

Would a cut and glued mouse pad be thin enough?

Sincerely,
Theis

 

[Lrdchaos]

Thank you sir!

 

[buffybuster]

Moleskin

 

[asus611]

Try a wiebad cheek pad? I had one on my old KMW it worked great

 

[Pav67]

Try AGrip.I bought a sheet and cut it to fit my ax cheek piece .Looks and feels like a soft suede and has held up well so far.I have a wiebad mini stock pad on my sentinel and run the cheek piece all the way down also.Both work great. If your looking for thin as possible try the AGrip.

 

[Terry Cross]

Wiebad makes thin cheek piece pads that are custom shaped for each type stock. They make one specifically for the SENTINEL cheek piece.
http://wiebad.mybigcommerce.com/mini-stock-pad/

Definitely thin and nicely tailored to the shape of the CP. Quality materials and fitting.
It looks much better on the stock than the pic they chose for their web page.

 

[BWB]

This is what I use for that type of application. Don't get me wrong, there's nothing better than a Weibad stock pad but this is really nice when that will bring everything up too much.

https://www.amazon.com/Darice-Stick...7217&sr=8-13&keywords=sticky+back+foam+sheets

 

[Wyfox]

I use the Wiebad on my Sentinels, it's by far the best way to go.

 

[jducos]

I have a wiebad on my sentinel as well and I'm very happy with it.

 

[Lrdchaos]

I’ve had the weibad before, I’m a little gun shy that it might be too thick. My rings ar vortex pmr’s .092 so it puts my scope low.

 

[Harv24]

Moleskin with a light dusting of spraypaint….

 

[MtnCreek]

I've found black moleskin at archery shops.

 

[Greg Langelius *]

I've been using the peel & stick Foamies sheets to cut out custom thin pads since the mid-90's. They can be had in thicknesses from 2mm to 5mm.

Greg