Thinking about another new can.

[thedude824]

I decided to go with the B&T SRBS for my girls 6.5 Grendel based on recommendations here in my last thread. I have a Hybrid 46M for my MRAD and another old baffle type can for my SBR 300blk. I have a HUXWRX Flow 762 that floats around my semi autos. These include a 14.5 556 piston AR, 2 x 6.5 Grendel’s DI, and a SCAR 17 SBR with DiSCARder. I would like to leave the Flow 762 on the Scar and pick up another 762 suppressor. All of the semi autos use HUXWRX devices currently. I’d rather try something other than another Flow 762, and I’ve heard the Ventum does not suppress as well. I see a lot of praise for CAT OBD suppressors, but their stance as a company leaves a bad taste in my mouth. I need something that is at least “high flow”. All of the rifles have adjustable gas and the AR has the SD charging handle. I really like the Velios LBP 762. It’s $1099 plus stamp. Unfortunately the HUB adapter for HUXWRX is like $205 when you can find them. That will be an extra cost for anything but a HUXWRX though. I’m looking for suppression no worse than the Flow 762, but I would like to try something different. The shortest barrel is 13.9”.
Thank you

 

[Rob01]

Take a look at the Flow Range 36 if you wanted to stick with HuxWrx. I have one and have used it on .223, 6ARC, .308 and 9mm PCC.

 

[thedude824]

Take a look at the Flow Range 36 if you wanted to stick with HuxWrx. I have one and have used it on .223, 6ARC, .308 and 9mm PCC.

Are you able to compare it to the Flow 762?

After reading reviews about the CAT OBD I may have to rethink my previous position. It sounds like exactly what I’m looking for.

 

[Rob01]

Are you able to compare it to the Flow 762?

After reading reviews about the CAT OBD I may have to rethink my previous position. It sounds like exactly what I’m looking for.

No but it’s about the same as the B&T 762 I have.

 

[oldrifleman]

Yeah the Ventum is a sad excuse for a Huxrux. The Velos lbp is pretty decent but my favorite is the ODB ( Old Dirty Bastard). It is a spectacular gas gun can and my 300 blk loves it.

 

[thedude824]

I appreciate the info. I’ve got a bit. I just need something to research while this never ending divorce drags out.
Interesting that the Flow 36 sounds comparable to the B&T SRBS. IMO that’s impressive with regards to the Flow 36.

 

[StephenShivers]

Radical Defense LS3/LS5 seems to be up there with the other high flow suppressors. 3D printed out of Haynes or Titanium. Great price point too at $849 for the short LS3 and $899 for the long LS5. Woth a look

 

[Ape_Factory]

I have the Flow 762 as well as both the Radical Defense LS3 and CS3. The RD is a hybrid design, 3D printed with baffles and bypass tubes. The LS3 has more back pressure than the Hux, unquestionably. The CS3 and Flow on my 300 Blackout function pretty much identically. The CS3, being shorter, isn't overly heavy in the Haynes 282 configuration. My LS3 is titanium as it'd be a boat anchor in Haynes. But the CS3 is manageable.

Unfortunately, while the LS3 can use the Hux HUB (and I do use it), the CS3's internal diameter doesn't work with the Huxwrx muzzle devices. I will say the CS3 rocks on my 300 Blk, even with "simulated" full auto function (snicker) subs or supers.