This is my .338 Ulta Mag.It has a 30" Pac-Nor three groove 1/10 twist.It is free floated all but four inches in front of the reciever,it sets in a bedding block for that 4".It has a brake that I made my self,it works well.
Photos This is my rifle
- Thread starter varmint53
- Start date
Re: This is my rifle
kcbaird yes i did have to do some work with the knobs,......like you said they do have slop,what i did was to bed the coin slot with bedding compound, that got rid of most of it.the stoney point knobs are useable now.Hue001t the gun can shoot if i do my part,...can do .5 allday and better if i do my part.You may know somtimes youcan shoot and other day you can't shoot for sh-t.it has a 6.5-20 L-pole scope with mil. dots the gun weights 14#.With the brake its like shooting a 308.I just ordered a box of 300 laupa bullets,i think they will very good,...if the bullets are as good as thier brass.This gun only uses one 1/4" bolt to hold the action in place.The action does not touch the stock at all.I shoot the 300 SMK
kcbaird yes i did have to do some work with the knobs,......like you said they do have slop,what i did was to bed the coin slot with bedding compound, that got rid of most of it.the stoney point knobs are useable now.Hue001t the gun can shoot if i do my part,...can do .5 allday and better if i do my part.You may know somtimes youcan shoot and other day you can't shoot for sh-t.it has a 6.5-20 L-pole scope with mil. dots the gun weights 14#.With the brake its like shooting a 308.I just ordered a box of 300 laupa bullets,i think they will very good,...if the bullets are as good as thier brass.This gun only uses one 1/4" bolt to hold the action in place.The action does not touch the stock at all.I shoot the 300 SMK
Re: This is my rifle
yes that is ,,,i use it to hold my camo neting or a mirage shield when testing loads
yes that is ,,,i use it to hold my camo neting or a mirage shield when testing loads
Re: This is my rifle
Yes that had the sticky back on it...and works good to hold the camo netting.... i just roll it around the barrel loosey and it breaks up the barrel silhouette.
Yes that had the sticky back on it...and works good to hold the camo netting.... i just roll it around the barrel loosey and it breaks up the barrel silhouette.
Re: This is my rifle
Nice looking rifle. A question about your muzzle break there. I am just making an assumption here but i am assuming that the break is for reducing recoil. I am not criticizing your work but wouldn't it have been more effective to give the slots more of an angle to them?
Something Like this:
/-\
/-\
/-\
Nice looking rifle. A question about your muzzle break there. I am just making an assumption here but i am assuming that the break is for reducing recoil. I am not criticizing your work but wouldn't it have been more effective to give the slots more of an angle to them?
Something Like this:
/-\
/-\
/-\
Re: This is my rifle
Yes Soggy you are right,but much harder to cut the angle cuts to match up at the center of the brake.Here is one reason not to do it as you have it with the angles that sharp ...is the amount of noise and concussion from the muzzle blast.No harm in asking though.
Yes Soggy you are right,but much harder to cut the angle cuts to match up at the center of the brake.Here is one reason not to do it as you have it with the angles that sharp ...is the amount of noise and concussion from the muzzle blast.No harm in asking though.
