Gunsmithing Tikka T3x Rechambering

[cjs88]

I have a T3x in 6.5CM, I know to change to 6.5PRC I would need a different bolt. Is that the case if I had it rechambered to 6.5x47?

 

[EN2722]

I have a T3x in 6.5CM, I know to change to 6.5PRC I would need a different bolt. Is that the case if I had it rechambered to 6.5x47?

no it uses the .473 bolt face

 

[Shooter71]

PRC is easy, I’ve done a slew of conversions now without issue. Bolt gets machined, barrel gets rechambered. Long action bolt stop, long mag. 47 will require a set back, and a good reason.

 

[EN2722]

Yeah, didn’t read it the OP’s question fully.

Are you looking to get your current 6.5 CM barrel rechambered or a new barrel chambered in a 6.5x47?

 

[cjs88]

I have a new barrel to throw on there. I know when I asked the smith before he said a different bolt would be required for PRC, was curious if I could use the same bolt for the 6.5x47.

 

[EN2722]

I have a new barrel to throw on there. I know when I asked the smith before he said a different bolt would be required for PRC, was curious if I could use the same bolt for the 6.5x47.

the bolt you have will work for 6.5x47

 

[cjs88]

Awesome, thanks.

 

[Average guy]

I will add that LRI is offering an aftermarket Tikka bolt that will make caliber conversions easier.

 

[cjs88]

I will add that LRI is offering an aftermarket Tikka bolt that will make caliber conversions easier.

Yes, that is why I asked. Wanted 6.5PRC at first but didn't want to switch bolts. Since they offer it now, it is a possibility but the x47 sounds intriguing to me and I don't need a different bolt.

 

[XTREM HTR16]

Yes, that is why I asked. Wanted 6.5PRC at first but didn't want to switch bolts. Since they offer it now, it is a possibility but the x47 sounds intriguing to me and I don't need a different bolt.

as posted above, @Shooter71 will modify your bolt to PRC easy and quickly

 

[cjs88]

Also looking at the 6.5x284 norma.

 

[Shooter71]

Also looking at the 6.5x284 norma.

A perfect fit in my opinion.

 

[cjs88]

A perfect fit in my opinion.

Sadly, I have to rule it out. The Manners PRS1TK stock I have on order is only SA capable. So I am going with the 6.5x47.