Hi, wondering if someone can help, I have a cz 455 with manners stock in .22lr and a Remington 700 long action. I'm looking at a Wiha but I don't know if I need the 1.0nm to 5.0nm (8.85 inch pounds to 44.25 inch pounds) or the 2.0nm to 8.0nm (17.7 inch pounds to 70.81 inch pounds) model. I've seen a bit of the wheelers fat bob and the weavers version but I'm a bit of a fussy kind. Thanks
Gunsmithing Torque Driver
- Thread starter Mato
- Start date
Since you referenced the stock, I assume you are talking about action screws. It seems like most pillar or aluminum bedded stocks call for between 50-65 inch pounds of torque, but it's safest to check with the stock manufacturer.
I'm a little unclear as to your metric references as Wiha makes their torque drivers in SAE ranges as well. I have four of them that take me from inch ounces up to the 70 in lb setting. I use them all the time for mounting scopes. Having said that, 65in lb is a fair amount of torque to apply with a screwdriver type tool. For stocks, I prefer the Seekonk T-handle style of driver.
I'm a little unclear as to your metric references as Wiha makes their torque drivers in SAE ranges as well. I have four of them that take me from inch ounces up to the 70 in lb setting. I use them all the time for mounting scopes. Having said that, 65in lb is a fair amount of torque to apply with a screwdriver type tool. For stocks, I prefer the Seekonk T-handle style of driver.
QTS135, Screwdriver, Torque Limiting, Adjusting, 5-35 in. lb.
i picked up one of these off ebay at a deeply discounted price
and i bought one of these new bc i needed it for something else that day.
Armstrong 64-032 | Torque Wrenches
im a bit ocd and a mechanic by trade so
i picked up one of these off ebay at a deeply discounted price
and i bought one of these new bc i needed it for something else that day.
Armstrong 64-032 | Torque Wrenches
im a bit ocd and a mechanic by trade so
Similar threads
