Rifle Scopes TPAL 34mm scope mounts for AR10

[Tuff]

I've spent way too long researching this combo and am getting cross-eyed. I thought I had a winner with the Aadmount, but turns out the 30mm version fits a TPAL, but not the 34mm version (30mm=3" between rings, 34mm=2.5" between rings for S&B scopes). Hopefully SWFA will be kind enough for a return! But, I'm back to the drawing board.

I'm looking for a 1-piece mount with 20moa built in, 1.5" high minimum, around 3" between the rings to fit the TPAL, and 34mm rings. I don't really care if it's quick dismount or not, as long as it's stable. I'm looking to do some long range shooting with this setup.

My scope is a USO SN3 5-25x 58mm TPAL with 34mm tube. I have been playing with where the scope should be and this looks ideal for me.

I can't go less than 1.5" high mostly due to having pudgy hamhock fingers and where the charging handle is located.

LaRue LT111 would work, but it is 0MOA. Before I spend this much cash on a mount, I don't want to find out later on that it's my limitation when shooting long range.

American Defense AD-RECON-SW has the same issue for me of 0MOA

GDI P-ROM L-Model looks like it will work, but it's fairly pricey (even with the initial discount) and has an 8-10 week lead according to the website. I'd like to be shooting sometime in January.

Everything else I've found requires a 20moa riser rail and separate rings. This just feels overly complicated to me with too many things to work loose or shift around. Am I being unreasonable in this thought?

What mounts have I missed?

 

[taliv]

Re: TPAL 34mm scope mounts for AR10

If you go back half a decade in the archives at a couple other sites you can find my ordeal with the same topic. I'll spare you the long story and say the eventual solution was to get a Larue 5/8" qd riser and put seekins low rings on it.

That has worked great on my kac sr 25 and a colt m4 as far as holding zero. However for some bizarre reason the mount wont hold zero on two different pof uppers.

 

[Tuff]

Re: TPAL 34mm scope mounts for AR10

Is that the LT101? Is it a 0MOA rail?

 

[taliv]

Re: TPAL 34mm scope mounts for AR10

honestly don't remember. was just offering up the concept, more than the specific parts
looks like this though

 

[dvdt]

Re: TPAL 34mm scope mounts for AR10

Are you sure the new Badger mount wouldn't work?

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2645603&page=1

Looks like it might not be tall enough for you. Fits my 34mm tube 3.2-17x44 TPAL with room to spare.

 

[Tuff]

Re: TPAL 34mm scope mounts for AR10

1.2" would be too short. There was mention of another similar part though, Badger 306-64, which is a 1.49" tall version. I'm going to email and see if they can confirm the stats on that mount.

Thanks for the heads up!