Trigger Pin c clip removal?

[deersniper]

What is the best way to get these trigger pins out?

 

[hic28]

6 beers and needle nose pliers

 

[deersniper]

Lol how do I remove them without scratching the piss out of a gun I don’t want to Krylon yet

 

[Threadcutter308]

What is the best way to get these trigger pins out?

View attachment 7309216

Use a right angle steel pick, put your thumb over the top of the thing when it releases and wants to go airborne. Put the point of the pick in the apex of the clip and pull it away from the pin, in parallel with the receiver. Careful not to scratch the receiver with the point of the pick.

They are bait for the trolls that live under your bench. Once a troll gets his hands on it, you'll never get it back.

 

[hic28]

Lol how do I remove them without scratching the piss out of a gun I don’t want to Krylon yet

you can wiggle some Kapton tape under each side and use needle nose pliers.Lay the pliers flat on the receiver with the tips on each End of the c clip, a light tap and it will pop off. The Kapton tape will protect the receiver

https://www.uline.com/Product/Detai...VpCCtBh359welEAQYBiABEgKFd_D_BwE&gclsrc=aw.ds

 

[2aBaC̶a̶]

Small flat head like the ones for eye glasses and a steady hand. If theres enough play you can try sliding something under the c clip. Twist dont pry.

 

[deersniper]

Thanks guys. Used the mini screwdrivers.

First one slid right off. Figured I didn’t need a bag for the second one. It flew like a slingshot. Gun bench troll wasn’t quick enough. Found it ten mins later lol

 

[Threadcutter308]

Thanks guys. Used the mini screwdrivers.

First one slid right off. Figured I didn’t need a bag for the second one. It flew like a slingshot. Gun bench troll wasn’t quick enough. Found it ten mins later lol

You lucky bastard !