Trigger Tech Special Issue

elmuzzlebreak

Gunny Sergeant
PX Member
Minuteman
Oct 15, 2018
612
214
Unfortunately I cannot post a video but two things going on.

1. Firing pin cocked, rifle on safe, pulling the trigger causes the shoe to stick to the rear. Moving the Selector from safe to fire causes the firing pin to be released.
Removed the barrelled action and trigger. Reset everything. That problem goes away.

2. selector switch on safe, pulling the trigger causes the selector to jump to fire.

this action sits in a KRG.
 

Krob95

Elite Sand Master Race
Supporter
PX Member
PX Member
Minuteman
  • Sep 7, 2019
    1,880
    2,220
    NoCo
    On the KRG stocks, you may have to relieve a little material so that the safety can fully engage as there’s just enough material there to keep it from fully engaging. Pull the BA and try the safety. If it functions correctly, your issue and solution is in the first sentence.