Trimmer Alternative to the Giraud?

[tsu45]

Before I pull the trigger on an electric trimmer, are there any other comparable units out there?

 

[Bradu]

I don't think anything compares to it. By far the best purchase I made for reloading.

 

[tenringx]

GEN 3 POWERED CASE TRIMMER | website

Please email us if you would like to purchase a trimmer. We will add you to our notification list and send you notification when trimmers will be available on our website. We are currently sending out notifications every 4-5 weeks.Trimmers may take up to 5 weeks to be shipped once ordered. FOR...

www.hendersonprecision.com

 

[Sheldon N]

Before I pull the trigger on an electric trimmer, are there any other comparable units out there?

Dillon trimmer if you run a progressive press is the only thing that would be faster/easier. No chamfer debur though...

 

[Rillhurst]

Started with manual RCBS trimmer.
Then added power with Trim Pro-2
Got the Dillon trimmer running on a 650 for auto loaders.

After adding Giraud power case trimmer recently, only question is, why did it take me so long ...

 

[lightman]

I can't think of anything better.

 

[tsu45]

GEN 3 POWERED CASE TRIMMER | website

Please email us if you would like to purchase a trimmer. We will add you to our notification list and send you notification when trimmers will be available on our website. We are currently sending out notifications every 4-5 weeks.Trimmers may take up to 5 weeks to be shipped once ordered. FOR...

www.hendersonprecision.com

Looked at that one a little bit. I like the idea of just using one or two collets for the case head versus a separate insert for each chambering. Can find pros and cons for both indexing off the shoulder or case head. Their instructions are a little confusing on what you are setting and then removing for each application to set trim length. I’ll try to contact them on it.