Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Has anyone had trouble getting Alpha WSM mags to work in a Surgeon 591 WSM action. I just got one today and it won't seat all the way into the bottom metal. It seams like it is hitting the bottom of the feed ramp. Any help would be appreciated.
Do that and you can tell what needs to happen. If the magazine is hitting the bottom of the receiver before it latches then the DBM latch needs to be shorter or the DBM needs to be further out of the stock.
Compare the location of the locking notch on your AI magazine to the Alpha locking notch.
No, I am currently running a 6XC on that action, so I use my AI mags since the round's short.
I let Alpha know last summer, but haven't heard anything from Chris. I'd love to run them on my Surgeon, but it looks like where the box is folded to retain the follower makes it a no-go....
I had this same problem with one of my 591's in an AICS FWIW, but only with some alphas. I managed to get them all to seat with a LOT of pressure. It didn't negatively affect the gun or magazine in any way that I could see.
I took a dremel to the front of the mag, the tabs that hold the follower in place were sticking up to high. Alpha should move those back a little so that they will clear the bottom of the action.
I had the same problem on a Type 2 mag and a 591 (standard face) I bought about new 2 months ago (C prefix action). I mocked up the Surgeon DBM to the 591 with the supplied pillars. Mag would almost seat; latch would almost catch. The 2 tabs at the front of the mag that hold the follower down were contacting the action just under the feed ramp as noted above. I just took a small hammer and tapped them down just a touch. I probably should have used a metal pipe about the same diameter as the action and hit that instead of the tabs themselves. I just tapped a lil and kept trying until the latch clicked in place. The mag fits snug in the dbm with no rattle at all. I run a couple of mags of empty rounds through the action alone (no barrel on it yet). Everything worked fine.