TT replacement trigger issues

[Sprayed99]

Has anyone had any problems with the replacements from TT yet?

I have one on an Impact action and when you run the bolt slow it is fine. Once you run the bolt with any speed it drops the firing pin. I have tried several trigger hangers. I have them looking into it, but was curious if anyone here has seen any oddities with their replacements.

Also, it seems the detents are pretty harsh/stiff when making adjustments with this new batch.

TIA

 

[lte82]

What's the trigger weight set to? I had to run mine at 8oz or heavier to get the sear to hold on several of them.

 

[Sprayed99]

What's the trigger weight set to? I had to run mine at 8oz or heavier to get the sear to hold on several of them.

about 14 and dialed is all the way up to almost 30 and all the way down to 5ish. I do know that can be a bit of an issue.

 

[rangerroy]

Had the same issue on mine. Had to bump up the oz a bit and I have to fully cycle the bolt (should be doing this anyway when dry firing but other triggers have taught me bad habits).

 

[Defender32]

I just got my replacement in today and installed into my B14R. Adjusted it to 1lb 4oz 10 pull average.