Just seeing if any of you upgrade to these springs.I just got these installed and got put down by the guy at the gun show who put them in. he puts ar 15 uppers together and said to come back when it breaks down. He dosent know im shooting with a can and every thing is harder on bolt parts. what do you think and anyone using these springs
Tubb Precision CS AR-15 Extractor/Ejector Spring
- Thread starter culater
- Start date
Re: Tubb Precision CS AR-15 Extractor/Ejector Spring
I haven't tried these springs yet. However, something to think about: Some time ago, I had horrible problems with ejection due to overly powerful extractor springs. The extractor spring was so strong, it pushed the oposite side of the case onto the inside of the bolt with so much force that the ejector couldn't push it off in time for the case to make it out of the ejection port.
I had stovepipes, fired cases jammed in the upper over the live round that was attempting to be fed...All I did was go back to regular power extractor spring, and all the problems instantly went away.
I haven't tried these springs yet. However, something to think about: Some time ago, I had horrible problems with ejection due to overly powerful extractor springs. The extractor spring was so strong, it pushed the oposite side of the case onto the inside of the bolt with so much force that the ejector couldn't push it off in time for the case to make it out of the ejection port.
I had stovepipes, fired cases jammed in the upper over the live round that was attempting to be fed...All I did was go back to regular power extractor spring, and all the problems instantly went away.
Re: Tubb Precision CS AR-15 Extractor/Ejector Spring
if it isn't broken, don't fix it.
couldn' be any simpler than that.
if it isn't broken, don't fix it.
couldn' be any simpler than that.
