Tuner series: Harris tuner part 2

[Sniper King 2020]

 

[MikeEzell]

Thanks for all you're doing Bryan! Let me know when/if you'd like to test with my tuner. I'd happily donate one to your testing. I didn't want to at first because I didn't want it to be perceived as influencing your test in any way. But, seems like your tests have already shown that tuners do in fact work. I can do the install as well but it may be easier and cheaper to have that done locally without shipping back and forth. Thanks again for all your work.

 

[Sniper King 2020]

Thanks for all you're doing Bryan! Let me know when/if you'd like to test with my tuner. I'd happily donate one to your testing. I didn't want to at first because I didn't want it to be perceived as influencing your test in any way. But, seems like your tests have already shown that tuners do in fact work. I can do the install as well but it may be easier and cheaper to have that done locally without shipping back and forth. Thanks again for all your work.

Cool, appreciate it. Does yours have the same thread pattern as the Harris? It probably doesn’t since you didn’t mention that but on the off chance it does then that would be super convenient. If it doesn’t then I’ll have to wait to get donation(s) for a barrel and chamber job before I can start with yours.
The results are freaking amazing. I’m surprised at how similar both tuners have been in terms of regaining tune. Also amazing to find 3 replications of testing that shows a fairly clear “line in the sand” in terms of atmospherics that predict loss of tune. I look forward to seeing if this exists for temp and humidity at least where I live in my atmospherics.

 

[MikeEzell]

Here's a detailed print for installation. Note there is a .900x .500 long journal behind the threads. It's also very specific as to thread spec. Lots of smiths thread to fit the part in hand. No way to guarantee fitment unless the bbl was threaded to a class 2 dimension but it often will. Just can't guarantee a custom fitment or thread spec is all. Installation instruction are the pdf attachment.

Here's also a link to my page with a lot of good info. The site is out of date a bit, mainly pricing. I need to update lots of stuff on there asap.

PDT Tuners

Our new barrel tuners… PDT stands for particle dampening technology. We applied published scientific research on particle dampening technology to our barrel tuner. The advantages are a wider …

www.ezellcustomrifles.com

Mods....take it down or edit if this bends any forum rules.

 

[Sniper King 2020]

Here's a detailed print for installation. Note there is a .900x .500 long journal behind the threads. It's also very specific as to thread spec. Lots of smiths thread to fit the part in hand. No way to guarantee fitment unless the bbl was threaded to a class 2 dimension but it often will. Just can't guarantee a custom fitment or thread spec is all. Installation instruction are the pdf attachment.

Here's also a link to my page with a lot of good info. The site is out of date a bit, mainly pricing. I need to update lots of stuff on there asap.

PDT Tuners

Our new barrel tuners… PDT stands for particle dampening technology. We applied published scientific research on particle dampening technology to our barrel tuner. The advantages are a wider …

www.ezellcustomrifles.com

Mods....take it down or edit if this bends any forum rules.

Thanks, Mike. This will require I get a new barrel so it will take some time to build up the Patreon contributions to make that happen. I’ll let you know when I’m close to getting the barrel.