My new AI unfortunately does not like my old go to varget load of 44gr. I have my seating dies set up to pretty much 2.80 with 178 amax.I have tried to seat off the lands in the past but found my spec loads just seemed more accurate so I stopped doing this( not saying my depth was not still wrong... could have been touching or doing it wrong).
So I was considering dropping to 43g and working up to try and find a good load, but someone mentioned try adjusting the seating depth.
In order to not change too many variable at once , which is suggested first. tweaking the load and find the best, then tweak the depth to see if it tightens even more? I have come to realize I was lucky having the 44g shooting so well for so long. Now I got to start over.
So I was considering dropping to 43g and working up to try and find a good load, but someone mentioned try adjusting the seating depth.
In order to not change too many variable at once , which is suggested first. tweaking the load and find the best, then tweak the depth to see if it tightens even more? I have come to realize I was lucky having the 44g shooting so well for so long. Now I got to start over.