Bryan W M Sergeant Full Member Minuteman Oct 31, 2011 1,462 2,648 East KS Jan 11, 2020 #1 Jan 11, 2020 #1 Need someone or a few to please measure how much the barrel goes into the can on 5/8-24 direct thread. Have a 11.5 barrel trying to see if 10.5 handgard will work.
Need someone or a few to please measure how much the barrel goes into the can on 5/8-24 direct thread. Have a 11.5 barrel trying to see if 10.5 handgard will work.
Geno C. Dirty Carnie Full Member Minuteman Oct 24, 2007 7,058 16,170 41 Wautoma, WI Jan 11, 2020 #2 Jan 11, 2020 #2 The threads are only supposed to be .6” long so that’s all the farther it should go into the can. That’s if I’m understanding your question right
The threads are only supposed to be .6” long so that’s all the farther it should go into the can. That’s if I’m understanding your question right
Bryan W M Sergeant Full Member Minuteman Oct 31, 2011 1,462 2,648 East KS Jan 11, 2020 #3 Jan 11, 2020 #3 @Geno C. Does the back of the can stick out past the threads starting point? Still waiting on my serial number...
@Geno C. Does the back of the can stick out past the threads starting point? Still waiting on my serial number...
Shane C. TBAC Guy Full Member Minuteman Jun 29, 2004 182 57 Cheyenne, Wyoming Jan 11, 2020 #4 Jan 11, 2020 #4 Bryan W M said: @Geno C. Does the back of the can stick out past the threads starting point? Still waiting on my serial number... Click to expand... No
Bryan W M said: @Geno C. Does the back of the can stick out past the threads starting point? Still waiting on my serial number... Click to expand... No
Bryan W M Sergeant Full Member Minuteman Oct 31, 2011 1,462 2,648 East KS Jan 11, 2020 #5 Jan 11, 2020 #5 Thank you Geno and shane. I wanted to be sure 1in between handgard and muzzle would be enough Reactions: Geno C.
Geno C. Dirty Carnie Full Member Minuteman Oct 24, 2007 7,058 16,170 41 Wautoma, WI Jan 11, 2020 #6 Jan 11, 2020 #6 Yeah the can stops at the thread shoulder. You’ll be good with that inch
0724/1030 Gunny Sergeant Full Member Minuteman Supporter Jul 11, 2011 505 1,184 North Carolina Jan 11, 2020 #7 Jan 11, 2020 #7 https://thunderbeastarms.com/tech/thread-specifications