Ultra high AR rings with built in cant exist?

[mattmcg]

Working on a new LMT MWS setup and was thinking through the ring setup. Does anybody make ultra high rings (~1.4" high) that are two piece setups with built in cant (20 MOA)?

I know there are some one piece setups (KAC comes to mind) but was really more interested in a Seekins or Badger like setup with separate front and back to connect to the monolithic rail.

 

[gugubica]

Re: Ultra high AR rings with built in cant exist?

Although it is a one piece, the Spuhr mount is amaizing, be worth checking out.

 

[armydog]

Re: Ultra high AR rings with built in cant exist?

that was what I want but had no luck, went with a Night Force unit, with 20MOA cant. looks good, very happy with it for a one piece and 250.00

 

[Spuhr]

Re: Ultra high AR rings with built in cant exist?

Problem with two piece tilted rings is that they HAVE to sit at the same distance from each others regardless on application, othervise will the scopetube be bent.
Therefor are mostly producers not interested in making tilted rings, as each model Will be to specific and have to little market.

I would recomend you unimounts, and if you chose our solution the advantage compared to our rings are.
1. Sturdier mount, better repetability.
2. Built in bubble level are bigger on unimounts ( only our mounts comes with integrated bubble level)
3. Our solution with the 10 degree key to get the scope in level are only working with the unimounts so far. And it saves you loads of work when mounting the scope.
( only our mount have that feature)

If you give me you'r email I would gladly email our catalogue.

Håkan

 

[mattmcg]

Re: Ultra high AR rings with built in cant exist?

Makes complete sense and was something I was wondering about as well. Thought there might be an alignment or length measurement on a picatinny rail that would solve the offset problem but perhaps even that method would be a bit too crude.

I learned something today!

 

[biner626]

Re: Ultra high AR rings with built in cant exist?

Larue makes a mount with 10moa built in. I'm not sure of the ring height.
http://stores.homestead.com/Laruetactical/Detail.bok?no=42

 

[VKC]

Re: Ultra high AR rings with built in cant exist?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body">Larue makes a mount with 10moa built in. I'm not sure of the ring height.
http://stores.homestead.com/Laruetactical/Detail.bok?no=42 </div></div>

That's their lowest height mount

 

[Robe]

Re: Ultra high AR rings with built in cant exist?

Desert Tactical makes a set of canted rings in 34mm with 20 and 30 moa. The rings are connected so you maintain correct spacing.Ring height is 1.5 inches. Here is a link: http://www.deserttacticalarms.com/access...cope-rings.html .