I purchased a USO from a Bluegrass Tactical (who I would give high marks to) along with an AI 0 degree cant unimount type base on top a Surgeon action. Much to my surprise I ran out of downward adjustment with the point of impact adjustment bottoming out 1 inch high at 100 yards. If this is operator error what am I doing wrong? Thanks.
Rifle Scopes USO 5x25/ 0 degree cant AI unimount issue.
- Thread starter whackahog308
- Start date
Re: USO 5x25/ 0 degree cant AI unimount issue.
If it has the EREK, you need to install the adjustment cap and adjust the center allen screw.
If it has the EREK, you need to install the adjustment cap and adjust the center allen screw.
Re: USO 5x25/ 0 degree cant AI unimount issue.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Autark</div><div class="ubbcode-body">Negative. I called USO with the same problem. They say you need a 30 moa base or mount to adjust the EREK correctly. I ordered theirs, even though it costs an arm and a leg. </div></div>
That doesn't sound right. But oh well. If you can't get sighted in at 100yds with a flat rail, there's something not straight somewhere.......
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Autark</div><div class="ubbcode-body">Negative. I called USO with the same problem. They say you need a 30 moa base or mount to adjust the EREK correctly. I ordered theirs, even though it costs an arm and a leg. </div></div>
That doesn't sound right. But oh well. If you can't get sighted in at 100yds with a flat rail, there's something not straight somewhere.......
Re: USO 5x25/ 0 degree cant AI unimount issue.
At the range, I went through the printed instructions verbatim on a 0 MOA mount. Had a very smart friend do the same thing with me. Could not get the EREK elevation adjusted with the zero stop set per their instructions.
The guy I bought the scope from had a 30 MOA base.
The mount Lazy originally recommended, and that I bought (after getting a 0 MOA base) was the USO 30 MOA mount. Thread
I called USO and talked to their tech. That's what he told me.
Just trying to save the OP some time and money from my experience.
At the range, I went through the printed instructions verbatim on a 0 MOA mount. Had a very smart friend do the same thing with me. Could not get the EREK elevation adjusted with the zero stop set per their instructions.
The guy I bought the scope from had a 30 MOA base.
The mount Lazy originally recommended, and that I bought (after getting a 0 MOA base) was the USO 30 MOA mount. Thread
I called USO and talked to their tech. That's what he told me.
Just trying to save the OP some time and money from my experience.
Similar threads
