This scope is mounted on my 10/22 and it’s been a while since I’ve shot it. I was at the range yesterday and noticed the reticle was blurry. Following the steps in these forums; I removed the scope cap, screwed the eyepiece all the way in, put the power on max and the parallax on infinity. I aimed it at the white wall, closed my eyes and slowly turning the eyepiece a out opening my eye every small turn. When the reticle was clear and sharp I thought I was set. I turned the power down and the reticle became fuzzy. I adjusted the eyepiece until the reticle was sharp then turned the power up and the reticle was again fuzzy. I don’t have these issues with the same style scope in 5-25x.
Any ideas?
Any ideas?
