Accessories Wanted: Curtis Custom Axiom/Vector bolts and barrels

[AXMC]

Looking for .223, valkyrie, or magnum bolts as well as barrels (especially interested in 6.5 and 6mm creedmoor) for an axiom/vector.
If you have one you're not going to use, shoot me a message with condition/ asking price.
Thanks

 

[AXMC]

Bump, still looking.

 

[AXMC]

Found a magnum bolt, still looking for .223 and valkyrie. Also interested in prefit barrels, especially 6mm and 6.5 Creedmoor.
Let me know what you have.
Thanks

 

[AXMC]

Bump, still looking.
Thanks

 

[AXMC]

Bump, still looking for a 223 bolt and barrel and a valkyrie bolt and barrel...as well as any other barrels you may have( 6 and 6.5 creedmoor especially)

 

[AXMC]

Bump

 

[AXMC]

Still looking.

 

[JWG284]

@amf_247 has a good deal on 6xc barrel and brass on here.

 

[jb41291]

Bump, still looking for a 223 bolt and barrel and a valkyrie bolt and barrel...as well as any other barrels you may have( 6 and 6.5 creedmoor especially)

.

 

[AXMC]

Bump, still looking.

 

[6brshooter]

I've got a 18" med Palma 6.5creed keystone barrel I might sell for right money. PM if interested

Day 1 load work, 147eldm at 2650. I bought the barreled action on here with only 20rds fired from generalzip. I've got a 20, 22, and 24" 6.5 creed rifles, and have bartlien spun up in 243cutright for my axiom. The barrel has 38rds on it and speed up a little, but 2650 is honking on with a .697bc in a shorty

 

[Garett73]

I've got a used 6 creed barrel was told 800 rounds through it. Has a few lathe marks on it from pulling it before the season. Its an mpa I believe heavy palma contour 24" threaded muzzle. Throated for 108eld-ms for 125.
Then in a month or so ill have a Brux 24" sendero chambered in 6.5 creedmoor will have about 850 rounds through it also muzzle threads for 300 bucks

 

[AXMC]

Thanks everybody for the offers. I should clarify....I'm really only interested in vector barrels (set up for hand tight), but am interested in axiom bolts since they're the same.
Thanks!

 

[AXMC]

Bump, still looking.
Thanks

 

[Rcornell27]

I have an 18inch 6.5 creed prefit for a vector from straight jacket. Proof comp profile. 0 rounds down the tube, I went another direction with the build. 350.00 shipped