I've decided to give Athlon a try and ordered a Cronus BTR I'm a big fan of the ARC M10 rings and I'm wondering what height I should go with? I am going to run it on a T3X CTR with a 20 moa rail. I would like to keep the objective as close to the barrel as possible and still be able to use some Aadland caps that I just ordered. Any suggestions?
Rifle Scopes What height ARC M10 34mm rings for Cronus BTR?
- Thread starter slkzic
- Start date
I had that setup with ARC Medium rings and it looked good. Cleared the caps and such, no awkward-looking gap (although that is subjective) it was pretty close to the barrel. I'm not %100 percent sure how well the low rings would work, but the mediums are good to go. If I still had that setup I'd send a picture
I use a .92 ring with my Cronus on my savage with a 20 moa rail and clearance for vortex caps.
My rifle has a medium varmint barrel.
my rail provides a high standoff though.
My rifle has a medium varmint barrel.
my rail provides a high standoff though.
ARC M10 Lows 22mm or 0.94" are fine for 50mm Objective scopes with Aadland caps, but for a 56mm objective you'd be safer with Medium 24mm or 1.10" ARC M10 rings.
Similar threads
