building a new 6XC. I have never loaded for one of these. Need to know which is the best die. Redding, Forster, etc. thanks in advance for any help.
what is the best die for my 6XC
- Thread starter 1legmont
- Start date
Re: what is the best die for my 6XC
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1legmont</div><div class="ubbcode-body">building a new 6XC. I have never loaded for one of these. Need to know which is the best die. Redding, Forster, etc. thanks in advance for any help. </div></div>
You said "best" so here ya go.I have one for my 6x47L.The level of quality is way over the top and it has advantages no other die offers.
http://www.warner-tool.com/reloading.htm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1legmont</div><div class="ubbcode-body">building a new 6XC. I have never loaded for one of these. Need to know which is the best die. Redding, Forster, etc. thanks in advance for any help. </div></div>
You said "best" so here ya go.I have one for my 6x47L.The level of quality is way over the top and it has advantages no other die offers.
http://www.warner-tool.com/reloading.htm
Re: what is the best die for my 6XC
I have Warner dies for my Palma, 6.5x47 and .375 CheyTac - they are without hesitation the best. Expensive, but with the cost of brass, well worth it considering you can tremendously extend the life of your brass.
Len
I have Warner dies for my Palma, 6.5x47 and .375 CheyTac - they are without hesitation the best. Expensive, but with the cost of brass, well worth it considering you can tremendously extend the life of your brass.
Len
Re: what is the best die for my 6XC
Shoot 95LTZ a pm
he is the 6xc guru. I believe he has burned out more 6xc barrels than anyone here on the hide
Shoot 95LTZ a pm
he is the 6xc guru. I believe he has burned out more 6xc barrels than anyone here on the hide
Re: what is the best die for my 6XC
is the Warner any harder to set up than a regular sizing die? Will it fit in my RCBS press. I was told by a gunsmith to go with the Redding bushing die that radcustom suggested. I am open-minded if it's the best cash isn't a problem. It's when you don't get what you pay for that is the problem. Keep the comments coming i really appreciate them.
is the Warner any harder to set up than a regular sizing die? Will it fit in my RCBS press. I was told by a gunsmith to go with the Redding bushing die that radcustom suggested. I am open-minded if it's the best cash isn't a problem. It's when you don't get what you pay for that is the problem. Keep the comments coming i really appreciate them.
Re: what is the best die for my 6XC
It has the larger thread and body,1.5x12 thread.So you have to have the kind of press that takes it,meaning...in most presses there's a insert that needs to be unscrewed.
It's a little different to set with the shims but not hard to do.Just follow the instructions.
It's like comparing a Rolls Royce to a Cadillac.
It has the larger thread and body,1.5x12 thread.So you have to have the kind of press that takes it,meaning...in most presses there's a insert that needs to be unscrewed.
It's a little different to set with the shims but not hard to do.Just follow the instructions.
It's like comparing a Rolls Royce to a Cadillac.
Re: what is the best die for my 6XC
I have never used Warner dies but I have used the Redding Type-S bushing and Comp Seater for my XC and they work very well.
I have never used Warner dies but I have used the Redding Type-S bushing and Comp Seater for my XC and they work very well.
