Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
New Contest Starting Now! This Target Haunts Me
Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1legmont</div><div class="ubbcode-body">building a new 6XC. I have never loaded for one of these. Need to know which is the best die. Redding, Forster, etc. thanks in advance for any help. </div></div>
You said "best" so here ya go.I have one for my 6x47L.The level of quality is way over the top and it has advantages no other die offers.
I have Warner dies for my Palma, 6.5x47 and .375 CheyTac - they are without hesitation the best. Expensive, but with the cost of brass, well worth it considering you can tremendously extend the life of your brass.
Len
is the Warner any harder to set up than a regular sizing die? Will it fit in my RCBS press. I was told by a gunsmith to go with the Redding bushing die that radcustom suggested. I am open-minded if it's the best cash isn't a problem. It's when you don't get what you pay for that is the problem. Keep the comments coming i really appreciate them.
It has the larger thread and body,1.5x12 thread.So you have to have the kind of press that takes it,meaning...in most presses there's a insert that needs to be unscrewed.
It's a little different to set with the shims but not hard to do.Just follow the instructions.