So I shot my very first rounds today. Heres the specs below. I don't have a chrony yet but will very shortly. I looked for any type (that I know of) of pressure signs but could not find any. My concern is the bulge at the neck of the brass. Did this occur because of the crimp?
LC brass 5.56 - cleaned
deprimed
reprimed
FL sized with Redding FL die and bushing, went .002 smaller than original loaded case measured
trimmed to 2.260
used 62 grain green tip
23.1 gr of H335
CCI BR primer
LEE .223 crimper
LC brass 5.56 - cleaned
deprimed
reprimed
FL sized with Redding FL die and bushing, went .002 smaller than original loaded case measured
trimmed to 2.260
used 62 grain green tip
23.1 gr of H335
CCI BR primer
LEE .223 crimper