What bullet are y’all using for Prime .338 Lapua 300 gr OTM? I usually pick from the bullet library but don’t see anything.
Which bullet for Prime Ammo (338 Specifically) in AB
- Thread starter Cold_Bore_88
- Start date
Prime is not Lapua, it's Swiss P, RUAG.
The 308 and 338 is Swiss P ammo, made by RUAG, the 6.5 Stuff is Norma made by them.
I usually input it manually and don't use the library. I would have to look at the box of 338 as I don't recall off the top of my head by the other stuff has everything on the box.
But I also recommending doing your BC for AB vs using the library stuff, adjusting the BC first is proving to be more accurate than just changing the MV
The 308 and 338 is Swiss P ammo, made by RUAG, the 6.5 Stuff is Norma made by them.
I usually input it manually and don't use the library. I would have to look at the box of 338 as I don't recall off the top of my head by the other stuff has everything on the box.
But I also recommending doing your BC for AB vs using the library stuff, adjusting the BC first is proving to be more accurate than just changing the MV
Sorry for the confusion above. I worded it poorly. I am shooting Prime .338 Lapua.
Will input manually and use BC off box and true.
Will input manually and use BC off box and true.
How is it shooting out of your rifle and what is the ES looking like for your muzzle velocity? i am thinking of picking up a case of prime and would love to hear your feed back.
26” barrel with 1:9 twist is pushing the 300 gr Prime at 2670. Don’t recall my ES but the SD was 3-5 (no joke). Maybe I got lucky.
Great ammo.
Great ammo.
Similar threads
