Reloading Equipment Who can make a 22 creedmoor case holder for giraud trimmer???

[Sm1990]

I tried a 22 cutter with 6.5 creed and there’s too much slop can someone make me a case holder for the little creedmoor??

 

[Curahee19]

Giraud himself

 

[spife7980]

Where’s the slop come from? My 6.5 case holder works fine for 22 with the cutter centered.

 

[Rocklong]

I use a 6 and 6.5 case holders for my 22 creed

 

[Rocklong]

This guys 3d prints them but you need a reamer to finish them out by hand

 

[Sm1990]

Where’s the slop come from? My 6.5 case holder works fine for 22 with the cutter centered.

It’s comin from the spring mechanism I. The case holder. It’s sloppy af. I just tried to use it and it’s a no go

 

[canezach]

You can either call Doug and see if he can cut one for you, but I would suspect the best option for you would be to buy a blank case holder and find a Smith who has a 22 Creedmoor reamer

 

[JustMissedIt]

Just have your ‘smith cut off a piece of old barrel shank and hit it with the chamber reamer. Then, thread the outside. It’s what I did for all my calibers. No more spring action crap and WAY more consistent.

 

[LawnMM]

Why not have Giraud do it? If you have some secret squirrel reamer that's going to put you on the podium send it to him with a couple pieces of sized brass and he'll cut you a case holder with it.

Probably the most agreeable and easy going person on Earth

 

[Sm1990]

Why not have Giraud do it? If you have some secret squirrel reamer that's going to put you on the podium send it to him with a couple pieces of sized brass and he'll cut you a case holder with it.

Probably the most agreeable and easy going person on Earth

I don’t have a reamer and assumed he doesn’t either since he doesn’t sell them
It already