Who makes a accurate auto powder dispenser?
- Thread starter kwak
- Start date
Re: Who makes a accurate auto powder dispenser?
Another super accurate way is to use a cheap 20 buck Lee
perfect powder measure set about 3-4 tenths low and trickle
the remaining tenths on an Acculab. About the same price
and just about as fast.
Another super accurate way is to use a cheap 20 buck Lee
perfect powder measure set about 3-4 tenths low and trickle
the remaining tenths on an Acculab. About the same price
and just about as fast.
Re: Who makes a accurate auto powder dispenser?
+1 on the RCBS chargemaster 1500, I bit the bullet and bought one and glad I did. Love it.
+1 on the RCBS chargemaster 1500, I bit the bullet and bought one and glad I did. Love it.
Re: Who makes a accurate auto powder dispenser?
trickle up. I started that way, bought an electronic dispenser, shit canned it, and completed the circle. I do have a nice thrower, a Harrel's. Started with a Lee, and the difference is not night and day like you would think.
Most of the time, I just throw it into the brass. I can't see the difference on paper or steel. I feel better about it when I weigh every charge, but it does not seem to make a difference.
trickle up. I started that way, bought an electronic dispenser, shit canned it, and completed the circle. I do have a nice thrower, a Harrel's. Started with a Lee, and the difference is not night and day like you would think.
Most of the time, I just throw it into the brass. I can't see the difference on paper or steel. I feel better about it when I weigh every charge, but it does not seem to make a difference.
Re: Who makes a accurate auto powder dispenser?
have you guys done the speed update on the chargemaster? its in the programming and from what i read speeds it up. just curious. i use the RCBS thrower and trickle up. i weigh every charge. works now but i hope to shoot alot more and have been looking at a chargemaster for later down the line
have you guys done the speed update on the chargemaster? its in the programming and from what i read speeds it up. just curious. i use the RCBS thrower and trickle up. i weigh every charge. works now but i hope to shoot alot more and have been looking at a chargemaster for later down the line
Re: Who makes a accurate auto powder dispenser?
Been using the Lyman DPS III for quite some time, and it's as good at measuring out powder(especially Varget) as any other method I've used. Doesn't like metering out powders like H-110 or those Accurate Arms powders like #2, #5, #7(and so on)....the granules are so small that it binds things up.
Which ever one you get, keep the scale cleaned and zero'd and it'll work just fine. Even the most expensive scale that can be found on the internet is usless if not clean and zero'd....doesn't matter who has made it.
Scott
Been using the Lyman DPS III for quite some time, and it's as good at measuring out powder(especially Varget) as any other method I've used. Doesn't like metering out powders like H-110 or those Accurate Arms powders like #2, #5, #7(and so on)....the granules are so small that it binds things up.
Which ever one you get, keep the scale cleaned and zero'd and it'll work just fine. Even the most expensive scale that can be found on the internet is usless if not clean and zero'd....doesn't matter who has made it.
Scott
Re: Who makes a accurate auto powder dispenser?
Harrell's. Anyone on their page will do you will. I use my scale to get it adjusted just below where I want to be. Then trickle up. Harrell's are very consistent throughout throws. Very common to see them being used at benchrest matches.
http://www.harrellsprec.com/
Harrell's. Anyone on their page will do you will. I use my scale to get it adjusted just below where I want to be. Then trickle up. Harrell's are very consistent throughout throws. Very common to see them being used at benchrest matches.
http://www.harrellsprec.com/
Re: Who makes a accurate auto powder dispenser?
China.
I think it's foolish to judge everything by where it is made. Good products CAN come out of China. It just depends on their QC.
For instance, Iphones are made in China yet you don't hear anyone complaining about their quality.
China.
I think it's foolish to judge everything by where it is made. Good products CAN come out of China. It just depends on their QC.
For instance, Iphones are made in China yet you don't hear anyone complaining about their quality.
Re: Who makes a accurate auto powder dispenser?
When you buy American, America works. Who works when people buy things from Mexico,China,India and the likes. And people wonder why we have so many people out of work. I would choose to keep America working. I even buy rice grown in American and that is all China has to offer. And Mexico has good jumping beans but what has India and the others to offer?
When you buy American, America works. Who works when people buy things from Mexico,China,India and the likes. And people wonder why we have so many people out of work. I would choose to keep America working. I even buy rice grown in American and that is all China has to offer. And Mexico has good jumping beans but what has India and the others to offer?
