Will this zero method work on a Gen III razor

[whatsupdoc]

Has anyone done this? Does it work? Any issues?
Put a Gen 3 6x36 Razor an my rimfire, want to zero at 50 yards but cant get to a short range right now.

So if I set the elevation turret UP 1.6 mils from zero.
Loosen the turret clamp and adjust the center to be zero at 100 yards.
Lock the clamp, then when I dial down to zero that would be my 50 yard zero.

 

[Scott_at_Vortex]

Yes, if you zero at 100yds with your turret set at your 100yd dope(1.6 in your case) that will work.

V/R
Scott

 

[whatsupdoc]

Yes, if you zero at 100yds with your turret set at your 100yd dope(1.6 in your case) that will work.

V/R
Scott

Thanks that makes it easy.