Would you resize this brass?

[alpha6164]

I purchased a case of this and the brass looks really nice. Top Brass states that it is 100% processed, fully sized, etc. As dumb as it may sound, would you resize these all over again? I load using Hornady LNL setup and will basically just prime, drop powder and seat the bullet. I always resize new brass since they can come dented etc. But if i could get away from lubing all this brass since it comes 100% processed it would be great. All inputs appreciated.

Top Brass 100% 308 brass

 

[Suasponte]

Re: Would you resize this brass?

Load away! Scharch Mfg is a very reputable company. I have purchased many items from them with no issues.

Load with confidence.

Terry

 

[Hummerdawg]

Re: Would you resize this brass?

Scharch brass I just load it and shoot it (223)

 

[johndoe]

Re: Would you resize this brass?

It's good to go but I would atleast check it with a case gauge just
to be sure.

 

[jdwelch10]

Re: Would you resize this brass?

Unless u r into extreme accuracy I would just load and go

 

[pjparker]

Re: Would you resize this brass?

I would think it would be prudent to at least check a handful of them in your rifle's chamber for a "fit test" before loading up any. Once loaded, if they don't fit for some reason, you're really screwed.

They will probably be fine, but why take the chance. It is too easy to check and see for sure.

Paul

 

[samnev]

Re: Would you resize this brass?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johndoe</div><div class="ubbcode-body">It's good to go but I would atleast check it with a case gauge just
to be sure. </div></div>

What he said, check a few cases to be sure and load away.

 

[Joe-n-TX]

Re: Would you resize this brass?

You'll feel awful silly with loaded rounds that don't fit your gun.

 

[jedi8541]

Re: Would you resize this brass?

Just my .02 but how would the neck tension beafter sizing? I have found that neck tension can make a great difference in SD and ES . If you are benchrest shooting a couple of thousandths could make a difference but just for hitting steel it may not make a difference.