• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Firearms WTS 338 NMI

Kyle92

Supporter
Supporter
Minuteman
Jan 16, 2019
99
10
Built this gun for ELR, its chambered in 338 norma improved. It will outperform a STANDARD 338 lapua and feed 300grain bullets from a magazine. The headspacing is equivalent to 338 norma, so you simply shoot 338 norma to form the the 38degree improved case. Fireform loads with h1000 were capable of 1/4-1/2 moa and fully formed loads 1/4moa. 120 rounds fired. I am wanting to sell only barreled action, but have listed other combination options.

Heres the details:
Kelbly atlas tactical lapua bolt face, nitrided with HD bolt stop upgrade
Bartlein 9.3 twist MTU finished at 27"
Piercision 3/4-24 slabbed muscle brake
geissle super 700 2 stage trigger

barreled action with trigger- $2,000
w/out trigger-$1800

I will not sell stock separately, as I want to keep it, but would sell rifle with like new manners t2a GAP elite, and 3 aics CIP length magazines $3,300.


Will not sell scope or stock separately.

Whidden bushing die and Peterson brass can be included at extra cost.
 

Attachments

  • IMG-20200103-WA0005.jpeg
    IMG-20200103-WA0005.jpeg
    286.7 KB · Views: 346
  • 20190906_191205.jpg
    20190906_191205.jpg
    328.9 KB · Views: 376
  • 20190902_160334.jpg
    20190902_160334.jpg
    363.2 KB · Views: 432
  • 20190901_204527.jpg
    20190901_204527.jpg
    285.7 KB · Views: 427
Last edited:
What were you seeing for velocity with the 300 grain bullet?
I'm running right around 2850 with a mild load of h1000. I hit 2945 with retumbo when pressure testing. With rl26 or retumbo should be in the 2900's. That's with formed brass.
 
So how is that out performing a 338 lapua? My lapua ai shoots 300 grainers at 3100... or are you talking standard 338 lapua
standard 338 lapua. And it mag feeds 300 gr bullets seated with the bearing surface above the neck/shoulder junction.
 
Cone or flat-faced bolt? Piercision build? Which reamer? Are you turning necks? Thanks!