WTS: Had this rifle recently re-barreled by the great guys over at Phoenix Custom Rifles. My intention was to build a medium weight shorter barreled rifle in a folding lighter weight chassis that wasn't a pig to carry or hunt with, but would also be capable of putting some rounds thru before the barrel started walking. While waiting on the barrel to be spun up I ran across a killer deal locally on a similar rifle that kind of fills the same roll for me so I never got around to shooting this. The new barrel has ZERO rounds thru it. Would make someone a nice suppressed hunter/truck gun/ etc for not much more than the cost of just a quality barrel replacement. I'd just keep it but I"m trying to cut down on the number of rifles I have in the same calibers and would like to put funds toward a thermal. Donor was a Christensen Arms Mesa rifle. Two lug 700 Short Clone action with side bolt release, fluted bolt, m16 style extractor. I also installed a larger aftermarket bolt knob but will include the stock one as well. Rifle has the factory Trigger Tech Trigger, picatinny rail, and the MESA carbon stock w/ factory hinged floor plate and has been opened up slightly for the thicker barrel. Factory stock is bedded on the recoil lug only. The original barrel, which shot quite well, will be included and could be reinstalled at some point as the action was not altered in any way. The barrel shot great for what it is (Held MOA @ 100 w/ factory ammo) but wasn't heavy enough IMO for running a suppressor because they are a very light sporter contour and threaded 1/2-28. Factory barrel probably has less than 100 rds on it. Specs on the new barrel are as follows:
*BRUX Cut rifle barrel #5 Contour, 1:8 Twist, Finished @ 18"
*Chambered in 6.5 Creedmoor
*5/8x24 Class 3 muzzle threads for suppressor use
*Graphite Black Cerakote to match action
$1150 shipped for complete rifle from my FFL to Your FFL in the lower 48. USPS Money order preferred but could also probably work something else out. Bipods not included. PLEASE PM ME DIRECTLY IF INTERESTED. DO NOT POST HERE "I'LL TAKE IT", that pretty much guarantees an invite to be spammed. Please PM me directly and I will respond to that.
TRADE INTEREST: MAVEN RS 1.2 scope in MILS, Maybe Steiner 2-12, Quality set of 8x42 binoculars (razors, Maven, Swarovski, etc), 7.5 TW 6MM medium to heavy sporter blank, CZ 457 17 HMR barrel, new 7 PRC Brass, Manners LA Mini Chassis CIP Length, possibly other rifles but can't say I have anything particular in mind. I know I don't need anymore 308s or 6.5 CR, & 7 or 300 PRCs
WILL ONLY TRADE WITH MEMBERS WITH GOOD SH FEEDBACK
*BRUX Cut rifle barrel #5 Contour, 1:8 Twist, Finished @ 18"
*Chambered in 6.5 Creedmoor
*5/8x24 Class 3 muzzle threads for suppressor use
*Graphite Black Cerakote to match action
$1150 shipped for complete rifle from my FFL to Your FFL in the lower 48. USPS Money order preferred but could also probably work something else out. Bipods not included. PLEASE PM ME DIRECTLY IF INTERESTED. DO NOT POST HERE "I'LL TAKE IT", that pretty much guarantees an invite to be spammed. Please PM me directly and I will respond to that.
TRADE INTEREST: MAVEN RS 1.2 scope in MILS, Maybe Steiner 2-12, Quality set of 8x42 binoculars (razors, Maven, Swarovski, etc), 7.5 TW 6MM medium to heavy sporter blank, CZ 457 17 HMR barrel, new 7 PRC Brass, Manners LA Mini Chassis CIP Length, possibly other rifles but can't say I have anything particular in mind. I know I don't need anymore 308s or 6.5 CR, & 7 or 300 PRCs
WILL ONLY TRADE WITH MEMBERS WITH GOOD SH FEEDBACK
