Zero at 100?

[lethalsquirts]

Fellas... is it possible to zero my optic at 100 yards with a 30 moa rail?

 

[leftyk82]

Should be. I'm able to. Unless you have a very small tube diameter with limited elevation.

 

[brianf]

All depends on the available elevation of your scope.

Add what scope and model you have it’s a 1 second answer.

 

[lethalsquirts]

All depends on the available elevation of your scope.

Add what scope and model you have it’s a 1 second answer.

Vortex Razor Gen II 4.5-27x56mm

 

[brianf]

should be more than fine, with a little left over

scope has 28mil of elevation

cut it in half and you have 14 from dead center

30 moa is 8 mil +/-

so you still have 5 mils +/- (after mounting and zero) left over

only slight issue is that the farther you stray form dead center the image starts to suffer slightly in comparison, nothing to worry about though

 

[leftyk82]

Vortex Razor Gen II 4.5-27x56mm

My exact scope. Zero with confidence.

 

[diverdon]

Vortex Razor Gen II 4.5-27x56mm

Should be easy.

 

[lethalsquirts]

should be more than fine, with a little left over

scope has 28mil of elevation

cut it in half and you have 14 from dead center

30 moa is 8 mil +/-

so you still have 5 mils +/- (after mounting and zero) left over

only slight issue is that the farther you stray form dead center the image starts to suffer slightly in comparison, nothing to worry about though

Appreciate the explanation man! Makes sense.

 

[GIXXER2000]

I have a couple of AI'S with S&B 's on them that have a total of 40 MOA and i am able to zero a 100 yards.

 

[b6graham]

Vortex Razor Gen II 4.5-27x56mm

20moa rail and 20moa spuhr. good to go