Hey guys I’ve owned a SurgeX 7.62 for about 6 months Now! Love it takes a super sonic 7.62 and makes it hearing safe! Also love the fact I can go from 8 inches to 6. So as you know the surgex has welded baffles on the main tube and the ADAPT module, I noticed that the clips in the main tube line up and the ADAPT module clips line up but when you put them together the ADAPT module is clocked maybe 10 degrees when screwed on. Anyone know if this is correct? I can’t find anything on the internet. 1 picture of a cut away did show the baffles on the ADAPT being clocked some from the main tube. If anyone has one will you take a look down it lol thanks in advance, and yes I called surge they said it (sounds right) but he didn’t say for certain!

Like new with pin sized scuff on battery cover just put in rings black gen 3 razor 1-10 mil reticle. Had a change of heart in the direction I was going. Mount is sold


Scope only 1600 shipped and insured

Cash or Zelle Price: $1,500 USD
PayPal Price for Goods and Services: $1,554.75 USD

NO TRADES, except for cash.

Like new condition. Still has the protective film over the display. I have annealed 983 hundred rounds with it. I could anneal 100 pieces of brass in about 15 minutes. Comes with pilot number 73 and brass shell holder grip. Does not come with a shell holder. Check the AMP website for the correct pilot for your brass.

These now retail for $1,750 and are in demand, so I am firm on the price.

Shipping terms: Lower 48 only. Buyer pays for shipping and packing cost. I will use Pirate Ship to get the lowest rate for you. I strongly recommend you pay for insurance.
Payment terms: Cash, Zelle, PayPal are accepted. PayPal Goods and Services fees are buyers responsibility to pay and I have listed the price at the top to cover the fees. I'm ok with friends and family too. No shipping or item transfer will occur until payment is received and confirmed.

Local pickup: Item is located in Loganville, GA.

Selling Tangent Theta 7-35x56 JTAC
Few weeks old used in only one match—like new condition, no scratches.
Includes scope chap, leveler, tape, and original boxes.

Scope mount not included.

$old Shipped

Each hunter allowed to smoke up to 15?


Awesome!!!

1x 6mm Nitride still have allen wrench $160
1x 6.5 Nitride still have allen wrench $SOLD
or $300 for both.

Who ever takes both can have the 3/8 Allen wrench

2x 10 round AICS -$120
2x 10 round AW-SOLD

I have two set up exactly the same, Foundation Centurion for impact. Both stocks have been bedded by Roberts precision rifles. Both stocks have Hawkins M5 DBM with both long and short latches for both. Both stocks have a full length arca rail that has been cerkoted black. Both stocks have a full Jon Wells lead weight kit. I believe they are around 11# as configured above.

Black-$1600
Dark Distressed-$1400

Would probably make a better deal if i dont have to ship and pick up local or at a match. May entertain trade for ACC Elite.
Uploaded the only pic I have, will take some more pics tonight

Want to sell or trade my Anvil 30 along with the tapered Apex from my TFCT-34L.

Anvil 30 $375 shipped
Apex $100 shipped
Pair $450 shipped

Ideal trade on this would be a fixed apex conversion with a BH40 or BH55. If not any of those, then here’s the list of stuff I want.
Sig Kilo 10K G2
Sig Kilo 6K HDX
Fury 5000
New 6.5CM MRAD Conversion kit
Volquarsten 4.5” .22
Beretta A300 Ultima Patrol
Beretta 1301 Tactical
Badger CLIF 12 slot tan
Badger CLIF 8 slot tan

Hey all,
I’m pretty new to building rifles, so I might not have the right vocabulary to fully describe or diagnose everything here, but I’m hoping to get some input.
I just finished putting together a 6 ARC build and took it out for some initial testing. I’m running a RIFLESPEED gas block (set to 6) and shooting suppressed with an OCL Polonium.
I ran into a couple of issues right off the bat. First was a double feed—I'm pretty sure that one's on the mag.
The bigger issue came around the sixth round. When the range went cold, as I cleared the round in the chamber, the case separated and dumped powder all over the inside of the action, but the bullet stayed stuck in the barrel. Worth noting: I had just cleaned the barrel a few rounds before this happened.
I have some video and photos showing the chamber and the round, where you can see rifling marks indicating where the round is contacting the rifling. I’ll attach those for reference.
I’m trying to figure out if this is a gas issue or something else. Does the RIFLESPEED block only restrict gas, or does it also vent some off? I’m wondering if too much gas or pressure is being pushed back into the chamber and causing issues like this. I’m also looking into whether the throat on the barrel is too short—planning to contact the barrel manufacturer about that.
Ejection looked pretty normal—good pattern, not excessive—but when I tore it down afterward, I saw some noticeable wear on two bolt lugs (one above and one below the extractor). That wear has me thinking the timing might be off.
I've attached a couple pics of the bolt lugs as well.
Any ideas or similar experiences? Would appreciate any input.

SOLD
Certificate good for one free proof carbon barrel, expires 12/31/25.

$Sold

The Athlon Rangecraft Velocity PRO Radar Chronograph are in stock. After 6 months of pre-orders, back orders and delays we finally have inventory ready to ship. Please call us, 516-217-1000, for special pricing.
New for 2025, Athlon makes ballistic calculations easy with the Rangecraft Velocity Pro Radar Chronograph. It picks up the projectiles via Doppler radar, thus eliminating the need to mount the Rangecraft Velocity Pro to the weapon. This means it won’t affect your zeroing or barrel harmonics, so your accuracy remains the same. Since the unit isn’t triggered by a muzzle blast, it can pick up on projectiles from firearms with suppressors, muzzle breaks, compensators, and other muzzle devices. The Rangecraft Velocity Pro can measure projectile velocity between 65 fps and 5000 fps, allowing users to measure the velocity of a massive assortment of projectiles.

We also have a few SUPER DEALS to share with you:

While Supply Lasts - Zeiss Conquest V4 6-24x50 - ZBR-1 Riflescope reduced from $1,199.99 to only $799.99
High-quality optics for rugged hunting use
Offering up to 24x magnification and adjustable parallax compensation, this riflescope is ideal for precision shooting and long –range applications.
Large elevation and windage adjustment range
Multi-turn elevation turret with Ballistic Stop (absolute and positive return to zero)
Side parallax adjustment

The DNT The One 7-35x56 Riflescopes are on sale for only $599.99 - Crafted with hardened aircraft-grade aluminum and Japanese extra low dispersion glass. THE ONE scopes are the result of a collaboration of PRS and ELR shooters. Quick target acquisition and precise engagements with our improved 45-degree canted windage indicator.

The DNT ZULUS HD 3-12X Digital Night Vision Scope with Laser Rangefinder and Ballistic Calculator #ZHD312R is on sale for only $499.99 - Equipped with the highly sensitive SONY STARVIS 2 sensor and an integrated 850nm illuminator, the DNT Optics ZHD312R offers incredible visual sensitivity and illumination to see potential targets. The ZHD312R features a built-in laser rangefinder, providing accurate and consistent distance measurements between 5 – 1100 yards. The internal ballistic calculator quickly calculates your ballistic drop at the distance you`ve ranged.

All Arken Riflescopes are on sale at very reduced prices. - Arken Products are designed to combine quality, performance and precision with tremendous value.

It's that time again when we move some things around, change displays, and received in lots of Open Box and Demos from our suppliers. All Open Box optics are same as new, riflescopes were never mounted, everything comes as new.

If you're in the market for some optics and would like to save some $$$$ we have a great assortment of:

Leica Open Box & Demo optics

Nightforce Open Box optics

Zeiss Open Box optics

Swarovski Open Box & Demo optics

Leupold Open Box optics

GPO Demos & GPO Open Box optics

Hawke Open Box optics

Sig Sauer Open Box optics

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Unfortunately i havnt been able to contact anyone or get it sorted out after my account was compromised 2 times now

How that happens im not sure but seems like best thing at this point is a fresh account and restart on the lost 30+ feedback i had

Works great, just no longer need.

$150 shipped PayPal FF

2 500 count boxes of Sierra .22 Cal 69gr TMK. Still in the plastic.
Brand new unopened.

$300 shipped

New call, went out once with a buddy and didn’t enjoy the experience so I never used my call.

$200 shipped PayPal FF

Used one time. I like my LMT better. Like new condition.

$125 shipped PayPal F&F or Venmo gift.

I have 199 pieces of alpha dasher brass. All same lot. One unopened box. One box of 99 that is 1x fired, which has been cleaned and deprimed.

*SOLD*

BNIB

Nightforce NX8 4-32x50mm F1 , MOA-XT (C652) - $1700 (1 unit)

Nightforce NX8 4-32x50mm F1 , MOAR (C624) - $1600 (2 units)

Nightforce NXS 5.5-22x56 MOAR (C434) - $1600 (1 unit)


Payment:
Zelle / Wire / PayPal
Other methods available on request.

Shipping:
Buyer pays shipping. Tracking number provided. UPS

Contact:
Email: [email protected]
Text: 302-493-5647
Or just send a DM here

I have always wanted a 9 mm upper or 9 mm subgun for range plinking. I was never the biggest fan of straight blowback uppers for multiple reasons, most namely they are loud, and they tend to have a higher recoil impulse than locked breech systems. I also didn't want to deal with a mag well adapter or dedicated lower.

Anyways Midway had a sale on CMMG radial delayed uppers several months ago, and I picked up a 5" complete Banshee upper. I finally got around to shooting it.

In short, it runs great. Digested 115 and 147 hr loads without issue. The CMMG magazine that goes in a standard AR magwell worked without a hitch, and the BHO worked too. It suppressed reasonably well with a Primal 46.

I used it on a standard AR lower with a Geiselle SD3G trigger and standard carbine buffer. There were no trigger issues either.

I didn't shoot it enough to conclusively establish it's reliability but so far it has been off to a solid start.

Sold to Matty.

I have an unused Mark 7 Apex 10 press for sale. I got this a while back, assembled it and never got around to using it. It's setup for 9mm, no dies included. It also has a Mr. Bullet feeder. Price is $2000 shipped and insured in conus. I will ship it in three separate boxes and provide tracking.

Selling brand new in plastic Leupold Mark 4 6-24 PR2 reticle.

$1200 shipped

I’m working with a guy who is trying to potentially bring a WMRF to market. Price point goal would be around $1000 or so, so obviously the idea is to have what’s needed without extra fluff to add cost. I was thinking a 2K laser (no one is really shooting past that anyway, and if you are, step up to the Vortex), wired remote with a 90* plug, and the possibility of a small second screen that could be mounted on the rifle itself similar to a dope card, so you could stay on glass while ranging. What are you guys looking for in a more budget package?

MDT ACC Gen 1 in FDE. Got a few nicks on it. Comes with action screws. Decided to stay with KRG. $Traded to ballisticdaddy

Will trade for a KRG Whiskey 3.

FS/FT

JP Modular trigger, curved, with JP ambidextrous safety selector. single stage
$175 shipped SPF

Triggertech competitive single stage 3lbs, curved
$125 shipped SOLD

Timney competition single stage, curved
$125 shipped

Trades:
105 berger hybrids
109 berger hybrids
Cyke pod
30 cal ACE brake
30 cal area 419 hellfire match
SAC barrel vise
Offer up!