I have a Silencerco 46M and was wanting to mount it on pistols occasionally. From what I can tell, the Bravo piston mount is nearly unobtanium. Are there any alternatives out there?

Selling a proof carbon fiber barrel 5/8x24 for AXMC, I have not put any rounds through it. Price is $850 shipped, only trades are AXMC 24in and up 6.5 creedmoor barrels.

WTS excellent condition Staccato CS w/ 288 rounds through it. It includes a Leupold DPP w/ plate, 4 mags, and LAS IWB holster. It has been carried, but shot very little.
Price - $2150 shipped from FFL to FFL
Trades - none
Payment - cash, USPS MO, Venmo / PayPal (you eat any fees)
You are responsible for knowing your own laws.

Proof research - carbon fiber - new blank - .264, 20", 7.5 Twist

Sendero contour

New TL3 long action right hand with 308 and mag bolt face.
$1400 shipped

Sig P226 XFIVE Legion

C&H RMR/SRO mount with rear sight

Comes with all original magazines, parts and case. Excellent condition and very well taken care of and in excellent condition.

Less than 600 rds fired.

$1750

Many of these parts are new in box, let me know if you have any questions

Dillon 62200 toolhead stand RL1100/CP2000/S1050 (qty 2)- $110 shipped for both

Dillon 62006 Benchtop Mounting Plate | All Strong Mounts / RL1100 / CP2000 / Super 1050 / RL1050 - $80 shipped

Dillon 21054 243 conversion RL1100/S1050- $150 shipped

Dillon 550 B or C Caliber Conversions (priced individual, or take all 8 for $300 shipped) :

Dillon 14404 45ACP carbide die set, all good but paint stain on part of blue box -$85 shipped

Dillon Super Swage 600 - $90 shipped

Dillon 20063 large powder bars (qty 7) - $30 shipped each, or all for $180

Dillon 20062 small powder bars (qty 3) - $30 shipped each

Dillon 13644 powder bar spacer (qty 4) - $15 shipped each

Dillon RL550 primer slide (qty4) - $25 shipped each

Dillon 13940 body collar housing adapter (qty 15) - $13 each shipped

Dillon cast aluminum powder measure caps (qty 9) - $13 each shipped

Up for sale is my issued CompM2 4moa in very rare Wilcox mount. All illumination settings work comes as shown with covers and original electro etching.

$500 Shipped
PayPal FF, Venmo FF, Zelle.

NO TRADES

I have a brand new unused FDE 5700 Elite Kestrel that’s been sitting in the box in the safe as a backup. Figured I might as well let it go.

Asking $690 shipped. I prefer Zelle but also have PayPal and Venmo.

I've got a couple of these to give out.
Please PM me directly. I'll go by time stamp for claims. Please only message me if you plan on using the code before the deadline of 7/27

Thinning out some items due to getting old. I have a Wilson Combat

AR9 Carbine, Glock Receiver, 9mm, 16" Barrel, 1-10 Twist, Black with less than 200 rds. This rifle shoots one hole groups at 50 yds with Blazer brass cheap stuff. It has a pinned bbl. with the SUPPRESSOR INTERFACE / MUZZLE BRAKE | WHISPER RAPID-THREADand BLAST DIVERTER, RAPID THREAD MUZZLE BRAKE. extra mags and loader. Mags have the Wilson Combat H.D. spring.$1150. Pickup with proper Ohio ID in NW Columbus/Dublin Ohio. I can transfer with a copy of Your FFL. I am not an FFL . Shipping extra. I have over 180 A+ on Gunbroker and have been on the Hide over 12 years. Cash payment when You pick up or certified Ck ,USPS M.O. $60 for shipping.​

This is a new take off barrel from a Proof Research Elevation MTR Rifle. Fired once by Proof before they shipped the rifle

20” 8T Light Sendero CF , 5/8x24 muzzle thread with thread protector

Works on Zermatt Origin or Aero Solus Actions.

$775 shipped

Have a 3rd gen pvs14 w/IR lasers on everything, as well as a Thermal. Is there any advantage of these over what I have? If so the pros & cons please. Never fingered one so the first question, does it require a IR source to operated at night, if so that is a no go from the gate.

It's new and never mounted, but it has been out of the box several times. The one end of the box had the serial number and bar code cut out for proof of purchase, for the Leupold rebate. Model number 174546, I'm selling all my longer-range guns, Optics, bipods, and many Area 419 and Atlas bipods. I will have them listed in the next few days—this scope I bought in the hopes of using it for local PRS matches and hunting. But that's not going to happen. The scope is in excellent condition. Buyer pays shipping. I usually ship USPS Priority 3-day. I will send you the shipping cost if you give me your address.
Payment options include cash, check, USPS money order(ONLY), and PayPal. You can trust my excellent feedback, which is reflected in my 100% ratings on eBay and Gunbroker under the same name.
Asking $2200.00
Thanks in advance for looking at the scope and helping a Veteran. Cold War, Desert Storm. Kosovo, OEF, and OIF 23+ years Medical retired Wounded Warrior. FOB Salerno Khowst Provence Afghanistan 2011

I am selling a as new take off 9mm Colt AR barrel. I went the SBR route . It is C MP marked,chromed bore 9mm 16" $245 plus $15 shipping. PayPal is great or M.0. Alternatively You can pick up in NW Columbus/Dublin Ohio. I have been on the Hide for 12yrs and have over 180 A+ on Gunbroker.

Rimfire 22 Shooting



Applying RifleKraft to Rimfire

There’s a growing interest in rimfire—especially among new shooters, parents with kids, or anyone looking for a more accessible path into precision rifle shooting. The gear is lighter, the ammo is cheaper, and you don’t need 1,000 yards to train well. But while the platform may feel different, the principles don’t change. RifleKraft applies to rimfire just as directly as it does to centerfire—you just have to adjust how you interpret the results.



This isn’t about a different system. It’s about a different signal-to-noise ratio. The fundamentals still show up. The outputs still reflect the inputs. But some signals get louder, others quieter—and the shooter has to learn to read them for...

Click to expand...

Continue reading...

200 pieces of 6CRD SRP virgin Alpha brass $210 shipped

Bergara premier 6.5 creed 22 inch , mdt premier chassis, comes with magazine, been shot only a handful of times. Triggertech trigger.

Looking to sell for 1500$ firm shipped.

Or I’ll take 850$ for chassis SHIPPED AND 650$ for Barreled action.

I even have the factory stock I’ll throw in with the sale.

Need some diagnostic help on this situation.

Took this rig, in 6.5 CM, to the range the other day after it had been sitting in the safe for about a year. Only 350 rounds through it. All JP factory parts including the Silent Captured Spring standard for this rifle. Bobro one piece mount with a ZCO scope. Magpul magazines.

Prior to heading out I ran a couple of patches through the bore, took the bolt apart, wiped down the bolt, removed and wiped down the extractor lever and bolt face, and wiped down the BCG, all with M-Pro 7, re-assembled the bolt and lubed it and the BCG, light touch, with Mil-tec. I had cleaned all of this prior to putting it in the safe a year ago, so this was just in the spirit of good routine.

Had intended to just remind myself how the rig shoots, practice staying on it through recoil impulse, confirm zero, call it a day. Brought some Hornady 140gr ELD-M rounds, which routinely have shot .75 MOA or slightly better at 100 yards when I am competent behind the rig. Over the history of shooting this rifle no failures of any kind. Gas port was set for the Hornady a year ago, no changes prior to this outing.

So that's the set up.

Start shooting and get three good shots then one failure to extract. The spent cartridge is in the chamber. Not hard stuck, just wasn't extracted. Tap it out from the muzzle end with a cleaning rod and it drops right out, no hammering necessary. The shot was a center punch of a one inch paster at 100 yards, and it didn't feel like a hot load either how it sounded or how it recoiled.

Examine the bolt face, no debris in the extractor claw, bolt face is clean, no brass fragments, everything looks normal. Remove the bolt from the BCG, nothing in the BCG cavity that would impede the bolt cycling. Ran a pipe cleaner through the gas key on the BCG, clean. Swab out the chamber to be sure there isn't any debris there, all bueno.

Do it again and same result, this time four good rounds and one failure to extract.

Turn the gas port down to nearly closed and start the process of opening it a quarter turn at a time. No ejection at first, naturally, then as the port opens I finally get an ejection. Open it an additional 1/8th turn and shoot five rounds to confirm. All good. Changed to another Magpul mag just to be sure, once again five rounds all good.

Back on the rifle with a full mag (ten rounds), once again three good rounds and one failure to extract. Open the gas port another quarter turn. Once again three good rounds and one failure to extract. Open the gas port some more and get four good rounds then a failure. Kept doing that process until the brass was coming out of the ejection port dented, and still the occasional failure to extract.

I assume there is something obvious in my process that would account for the occasional failures to extract. Hope someone can contribute a suggestion or even a question that might help me through this. If there is something in my explanation of the set up that needs clarification, please let me know that.

Thanks for any suggestions.

For years my gunsmith has prepped barrels for me and I have installed them without any problems.

Needing a new barrel in a window that my gunsmith’s time line couldn’t meet, I purchased a nice prefit barrel. I installed it, the go gauge was perfect and the no-go closed a slight amount, may 1/4 the way and locked up solid, not much different than my other experiences. BTW this is a new action, not previously used.

Breaking in the barrel was normal as far as I could tell, chambering was fine, unlocking the action and ejecting the case was normal. Cleaning disclosed quite a bit of copper.

Measuring the fired cases, my comparator gave me a measurement of 1.245” consistently over the ten cartridges. My other action and barrel, gave me 1.243”.

Lots of variables here, barrels made by different companies, different reamers, and different gunsmiths. Are the slight variation in cases indicative of any issues or are they within the normal limits? Thanks for any insight.

10 sealed pounds of imr 8208xbr

Face-to-face in San Antonio.

500 bucks. Will trade plus cash on either end for baseball cards from 1957 and earlier

Construction on the new Tennessee Titans stadium has come to a screeching halt after a noose was found on the site, according to reports.
A statement from the Tennessee Builders Association (TBA) said it suspended work after discovering the “racist and hateful” symbol.
“We are requiring additional antibias training for every person on site, and work will resume only after a site-wide stand-down focused on inclusion and respect,” the TBA said in a statement.
A spokesman for the Metro Nashville Police said they’re aware of the incident and are investigating.
The TBA is offering a reward for information leading to the identification of those involved.
“We are outraged and deeply saddened by this act,” the alliance’s statement added. “We are working in close partnership with our client, trade partners, and unions to ensure every worker understands that racism and hate have no place here. Everyone deserves to feel safe, welcomed, and treated with respect and dignity.”
Nashville Mayor Freddie O’Connell (D), a Democrat, lamented the “hate-based” discovery.
“Obviously, this is an environment where we want to try as hard as we can to prevent scenarios that might be fear- or hate-based,” the mayor said in a statement. “We’ve taken some steps, both with local policies, state policy, and partnership with them to try, again, to keep temperatures low and prevent hate incidents like this. It is very concerning. There is an open investigation. I know the Titans are cooperating with Metro Nashville Police, and we’ll see what that investigation turns up.”
The Titans’ new stadium is a three-year project scheduled for completion in February 2027. The Titans’ current stadium is an open-air stadium. However, the new facility will be enclosed.
While the TBA may be suspending work, the Titans will resume their offseason program next Tuesday when they report to a Nashville practice facility.

HAVE TO WONDER IF THE CONSTRUCTION WORKERS HAVE A NOOSE CLAUSE IN THEIR CONTRACT??

What rifle is this? I saw Anschutz and $599 and it got me curious….

M14 barrel where rifling starts. Tried to clean with Boretech Eliminator and C4 fluids. Also with Iosso paste and shortstroking. Not a change. Used multiple new brushes in .308 size and in .416 size. Is this expected? Recommendations?

Athlon Chronographs & DNT The One 7-35x56 Riflescope News

We have a HUGE shipment arriving in a few days of the VERY popular new Athlon Chronograph. All pre-orders will ship and we will have extra's for open sales. Please feel free to place a pre-order and your new Athlon Chronograph will go out to you shortly. Please call and mention this forum to get personalized service.

DNT's The One 7-35x56 Riflescope is on sale for only $599.99 - Crafted with hardened aircraft-grade aluminum and Japanese extra low dispersion glass. THE ONE scopes are the result of a collaboration of PRS and ELR shooters. Quick target acquisition and precise engagements with our improved 45-degree canted windage indicator.

Specs,
Focal Plane: First Focal Plane (FFP)
Tube Diameter: 34MM
Zero Stop & Zero Reset: Yes
Length: 16 inches
Weight: 42 oz
Eye Relief: 3.5 inches
Illumination: Red, 6 Brightness Settings
Battery: CR2032
FOV: 7x – 16.66 @ 100 Yards / 35x – 3.34 @ 100 Yards
Parallax: 25 Yards – Infinity
Reticle: TOR (TheOne Reticle) / MPR (Multi-Purpose Reticle)
Recoil Rating: .50 BMG
Waterproof/Fog Proof: Yes, Nitrogen Purged
Total Elevation Adjustment: 35 MILS / 110 MOA
Total Windage Adjustment: 16 MILS / 55 MOA

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com