Gently used Dillon 550. $550 shipped. PayPal f&f. Please send pm if interested.

I needed a reason to justify rebuilding my 300 black out. The true reason is I fell in love with the rifle I built my girl using burnt bronze on the receivers, Geissele DDC parts, and FDE furniture.
My 300 black out was a cheapish Aero build. I’m now using a Vltor MUR upper without FA, Geissele DDC super charging handle, Geissele MK4 DDC 9.3” rail, and Wilson Combat 11.3” barrel. The lower is an Aero M4E1, Rise 535 trigger which I may replace with a Geissele SDE since I have them in all my other rifles, Magpul K2+ grip, Law folder, carbine buffer, Magpul SLS stock. Other than that I was just thinking of adding a Steiner Dbal. I’m just now worrying.. will the Steiner objective lens sit high enough to clear the Dbal??
EDIT: MRO isn’t popular with night vision and the bottom half of the sight picture from the scope would be blocked by the Dbal D2. I’d need a 1.93” scope mount which would place a top-mounted RMR WAY above the bore causing huge issues at anything other than zero distance or close. I’ll be using an Eotech EXPS3 on a Unity Riser and eventually a G33 in a Unity flip to center mount.
I’ll be using a SilencerCo Velos LBP 762.
I plan to stick with Hornady 110 grain VMAX over 19.8 of H110 and work up a sub load for 220 grain SMKs using N120.
Does this sound like a decent NV set up? I know 556 especially out of short barrels has a lot of blast so 300 black out seems perfect especially with subs.

Thank you for all the help!

I just bought a Huxwrx Flow 556... wanted to test these eForm4's shipping a can right to your door. Sure enough, its legit, approved in 4 days...

So i decided to build and submit a new eform 1 sbr lower for this build. And build a 11.5" BCM upper and a 12.5" Geissele upper.


Here the build specs


Lower

Spikes Tactical Spider Lower
Geissele Buffer Tube
Geissele H3 buffer/spring combo
Geissele trigger guard
Geissele Maritime bolt catch
BAD Pro Ambi Safety
Geissele lower parts kit
Magoul MOE K2+
Larue MBT- 2S Straight w/JP spring
Magpul CTR
BCM QD Endplate
Forward Controls Billet Castle Nut


Geissele Upper
12.5" Geissele chrome lined CHF barrel
9.3" Geissele SMR MK16 handguard
Geissele Super Compact gas BLOCK
Geissele Super Charging Handle
Spikes Tactical melonited gas tube
Rubber City Armory BCG
Magpul VFG


BCM Upper
11.5" BCM Chrome lined barrel
10.5" BCM MCMR MLOK Handguard
BCM 750 gas block
Spikes Tactical melonited gas tube
BCM Gunfighter Ambi charging handle
Rubber City Armory BCG
Magpul VFG

GBRS Lerna mount
Aimpoint T2

I just put some Hornady 55 FMJ-BT WC846 bulk plinking ammo through the Geissele upper today on one of my other SBR lowers to zero at 50yd and put some rounds down in.

Functioned flawlessly..... just waiting for the Huxwrx to show up in the mail then I'll start doing some testing.

I also have a 11.5" piston upper i built with a Superlative Arms piston kit that is very smooth ill be testing the Huxwrx on and comparing to these 2 uppers.


Login to view embedded media

Hello. I’m a new member on the forum. A little bit of background on myself, I enlisted in the Army National Guard and served from 1998 to 2002. I’ve been a police officer with a large municipal department in Southern California since 2002. I’m currently a SWAT officer for that department, and recently completed a 40 hour CA POST certified sniper school.

I have been issued and shot rifles for over 2 decades professionally, but precision rifle shooting is new to me, as well as sniper field craft. I am here to learn from and contribute to the forum and it’s members.

I built this PKM using surplus PKM parts and the cheapest AR I could find. I bought an Anderson Arms AR-15 for $$299 to use for parts. This 5.56 PKM uses an AR operating system salvaged from the Anderson Arms AR-15. It is shown with an old police surplus Beta-C mag and suppressor. The suppressor is direct thread and held in place by a retracting pin like the AK-47 brake.

Login to view embedded media

Today, the first round of DOGE cuts was passed by Congress, making $9 billion in DOGE cuts permanent!

USAID loses $8 billion.

And NPR and PBS lose $1 billion.

JD Vance cast the tie-breaking vote:

Selling like new Pure Precision Altitude stock.

TL3 Inlet (700 clone)
m5 bottom inlet
proof sendero channel
SRS Arca+pic rail

$550 tyd lower 48

Looking to sell a Vortex diamond back 20-60 straight spotting scope, has an arca adaptor, only reason is i've upgraded and don't need. lived in a neoprene cover and has only been used a few times. 325 shipped have the original box if you would like it. can send pictures on request. if you have any questions please ask! thanks

Personal opinions, Best caliber for big game at 400 plus yards. Most likely Elk.

Hi guys!

I'm looking at making a suppressed, subsonic only 300 Blackout. I want it to be reasonably quiet (if someone else is shooting, my shots are invisible) or whisper quiet while balancing good barrel length and can length. I don't see this gun being used past 50 yards, 75 is stretching it for what the gun's intended purpose is.

I was thinking a 5.5 inch barrel with a Surefire SOCOM300 SPS or something similar, full barrel length with can going to 14.5 inches max, aiming for 12 or so.

Has anyone got specifically decibel counts from down range as opposed to shooter's position with different lengths of barrel or cans? Any issues with dwell time, or is that a myth? I don't mind issues with sound at my position so long as down range is quieter.

Thanks for the help!

Hi, new here!

I was looking at a 20 inch Savage Arms 110 Trail Hunter Lite in 300 WM, and for general use, was wondering if I should put a brake or a can on it.

This gun is meant to be a mobile sniper-ish role when LARPing with friends. As realistic as I can make it for training and fun.

I'm a relatively small dude, about 130 pounds, so I was considering the brake so I could shoot it more than five times without calling it quits.

But I'm being told that a suppressor would also reduce recoil, just not as much, in addition to signature reduction.

I'm leaning towards a suppressor, but am unsure how much recoil it'll hit me with compared to a brake; I shot the same rifle with a brake a while back and it felt lighter than your average 12 gauge. I have not had the chance to shoot a suppressed bolt action in a higher caliber than 6.5 Creedmoor, and don't want to blow cash on a can just to figure out it sucks and I wasted my cash.

If I went with a brake, how many baffles are recommended? If I went suppressor, what suppressor is recommended and why? I was looking at the Surefire RC2 since the 300 SPS has some bulging issue with WM, but I want y'alls thoughts. Thanks!

All of the parts are brand new, never used. I put this together for this fall's backpack rifle build, but with both shoulders going down for surgery in the coming months, there's little chance it gets used. Parts list below.

Weight with CB brake and no mag at 6lbs 5oz., w/o the brake it should sit at 5lbs 11oz. Asking $OLD shipped and insured via DISCREET PP/Venmo FF/Gift or Zelle. I can add the TBAC CB .30cal brake and AccuMag 6.5PRC 3-rounder for $150 more.

• Defiance Anti-X SA Action .550 Magnum bolt
• Proof Research Carbon Fiber Prefit barrel, 22" 6.5 PRC 1:7.5 5/8-24 twist Sendero
• Trigger Tech Diamond 2-Stage PVD Black Flat Shoe
• Hawkins SA DBM5
• Manners Pro Hunter SA Micro Mini Chassis Back In Black with left side and bottom rear QD sling flush mounts
• TBAC CB Brake .30cal 5/8-24 (EXTRA $$$)
• AccuMag 3-Round 6.5PRC/.300WSM AW magazine

I recently purchased the 457 Varmint in22lr non MTR. Have only shot it in back of my house at 25yds. Haven't been to the range yet for 50yd shooting. Just from the research online, It seems a lot of folks are not getting very good accuracy. Some say no matter what ammo they have tried. The last CZ I owned was a 452 Varmint in 22LR years back. The 452 was very accurate even with the Federal 510 rounds. I'm just trying to see if a lot of folks on this forum have had poor accuracy out of this particular model. Also, if anyone found solutions to accuracy problems other than barrel replacement. I plan to install a yo dave trigger. Thanks for all input! I plan to experiment with action screw torque.

For sale: pt&g 1 piece bolt, remington 700, sa, .308 bolt face, pvd coated, mini m16 extractor, small spiral fluting. Has internals (shroud, firing pin, and spring) $375 shipped.

1500 for the Hesco U210 set
Large

1700 for the Velocity Systems D2134 set
Large

Both are high end multi curve super lightweight special threat plates.

***Apparently a couple geniuses have mixed up the difference between L210 plates (which are decent, but budget level, and stop less threats) with U210 plates which are high end plates that retail at near $2000. These are the latter.***

I have been shooting SK LR, Match, Center X and ELEY team and match. Just with the supply of ammo. I am having to lot hop. What would you say you would want your ES to be for rimfire. I’m going to try to do some lot testing in the fall.

Match master powder trickler. Like new. $650 shipped. PayPal or Venmo.

Atlas BT46-LW17 PSR Bipod. Used very little. . Pictures of slight wear in the pictures.

$225 shipped priority mail.
PayPal F&F or Venmo gift
No new accounts please

2- brand new TriggerTech AR10 duty triggers. Flat trigger. Fixed at 3.5 lbs. These are nice triggers especially for the money.
$80 ea. shipped priority mail.
PayPal F&F or Venmo gift.
No brand new accounts please.

How’s it going folks!

Got some stuff for sale:

ZCO 5-27
MPCT-3X
10MIL NLE
Hawkins mount 1.26”
$SOLD — Shipped and Insured lower 48
Everything pristine.

MDT ACC Elite
Titanium Blue
$SOLD
Would like to meet in the Austin area,
but can ship if not.

Everything else not for sale.

Reach out with any questions.

Thanks!

Looking to trade off my Korth Super Sport, it will come with hard case, both 9mm/357 cylinders, acro, dies, and brass. It shoots amazing but I just don't shoot revolvers much. I have around 50 rounds of 357 down the tube and about 200 9mm down the tube. Looking at 7k trading value

Sound Loans in Everett will ship it out for me so FLL to FLL

I have a Badger M2013 in a MPA Matrix pro chambered in 6X47 lapua. I also have a spare 6X47L barrel with a .223 bolt and .223 trainer barrel. All barrels are Bartlein barrels and spun up by Aaron Roberts. The rifle has a trigger tech diamond trigger, atlas bipod. The scope is a Priemer Optics 5.5-25X56 Gen 2 I still have the box for it if scope is not prefered I also have a Vortex Razor Gen 2 4.7-27X56 that we can swap it out with. There is only 400 rounds on the 6X47L barrel and 24 on the other. This rifle is turn key ready to go. I also have the action wrench to change out barrels. I am asking $5,500

Looking for a SilencerCo Bravo and Dead Air Recoil X brake

I guess this is the norm? Leo's were way calm in this

Login to view embedded media

Open Box and Demo Deals

It's that time again when we move some things around, change displays, and received in lots of Open Box and Demos from our suppliers. All Open Box optics are same as new, riflescopes were never mounted, everything comes as new.

If you're in the market for some optics and would like to save some $$$$ we have a great assortment of:

Leica Open Box & Demo optics

Nightforce Open Box optics

Zeiss Open Box optics

Swarovski Open Box & Demo optics

Leupold Open Box optics

GPO Demos & GPO Open Box optics

Hawke Open Box optics

Sig Sauer Open Box optics

ALSO, ALL Arken Riflescopes are on sale

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com