Let me know what you have. I will only do business with members who have established positive feedback.

I am selling a Like New NightForce NXS 5.5-22x56mm with MOAR Reticle model #C434 sitting in a New Burris UniMount.

I got this on a Rifle Combo Deal that I recently purchased and I prefer the NightForce ATACR model so I will give you a Great Deal on this one.

Only $1250 Shipped for the Scope and Mount Combo.

Open Box and Demo Deals

It's that time again when we move some things around, change displays, and received in lots of Open Box and Demos from our suppliers. All Open Box optics are same as new, riflescopes were never mounted, everything comes as new.

If you're in the market for some optics and would like to save some $$$$ we have a great assortment of:

Leica Open Box & Demo optics

Nightforce Open Box optics

Zeiss Open Box optics

Swarovski Open Box & Demo optics

Leupold Open Box optics

GPO Demos & GPO Open Box optics

Hawke Open Box optics

Sig Sauer Open Box optics

ALSO, ALL Arken Riflescopes are on sale

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

24" .223w, Hawkhill/737 build from Blue Mountain Precision. Muzzle, 419 adapter, Nomad 30 with Ebrake and ATS tuner, currently at "0"
I've had this a bit and can't leave well enough alone.
I did work a load with 24 grains of Varget, seated at 2.390 OAL using an old set of standard RCBS 2 die set, polishing the expander ball to give me best I can tell is .003 tension. Cases are unturned Lake City 04 cases. Annealed and dry tumbled, Hornady One Shot as lube, inside and out. Load was developed with suppressor on.

What I changed
Redding Type S Competition Die Set, Micro meter seater, .245 TN bushing, 21st Century .222 mandrel. Case prep-added brushing inside necks with bronze brush before and after annealing. Lubing was the same with One Shot. While at "2.390" OAL, using the ogive gauge and the seater, 1.88 CBTO+/- .001. I have to check "jump", have it written down. Measured outside neck of loaded on original at .246/.247(unturned brass)

Oddly, I called number 9 on each 10 round group, I did omit shot one from the "old load" as it was low and from coming off a string of PPU ammo, didn't affect grouping though, just the numbers.
Part of me thinks I wasted my money on the dies.
So;
try .221 mandrel?
powder charge tweak?
above and tweak tuner, although the numbers on ES/SD are higher.

Never even taken out of the shipping box. Bought while Forsters were unobtanium but then found a Forster before I received this one.

$SOLD TYD via Venmo/PayPal. Ships USPS or UPS with tracking.

An 18" .338 Lapua Magnum?

If you have a Desert Tech SRS A1 or A2, this is the most fun you can have with a rifle. This barrel has exactly 158 Rounds on it, all handholds, all Berger 250s. I can't find my test target, but it's a precise barrel as well.

I don't think the magazine ever actually had a round in it - to the extent it was used, it was used just to close up the mag well, because I single-fed everything into my rifle (I sold the rifle awhile ago, but held onto this just in case I picked up another one in the future, if that tells you how much I like it).

The TBAC .338BA Muzzle Device is not included, but I will include it for $80.00 (The muzzle device lived on a Barrett MRAD I had before this, so it has more than 158 rounds through it.

Let's talk ballistics. My middle-of-the-road load with 250 Bergers (2586 MV) went subsonic at about 1450 yards, which is almost exactly the same as a fairly hot 6.5CM 140Berger Hybrid out of a 24" barrel (2815 FPS MV). The difference is that it the .338LM is carrying 173% of the energy as a 6.5CM at 1450 yards (The .338LM has 150% more muzzle energy than a 24" 6.5CM). And that's with a 250 - a 300Berger Hybrid would outpace the 6.5CM by a long stretch. I never tested 300s, though, so I can't give you any real world data.

$850 Shipped CONUS.

Login to view embedded media I hate Plate Carriers. Had a good friend give me an LBT 6094. High quality for sure. I didn't like it. But I didn't like Flak Vest's either. I had heavy III+ plates so that may have something to do with my opinion. That said it just seemed bulky. I gave it to my Confederate Grandson and he loves it. I got one of these. A British PLCE. Have to say it's top shelf.

Zermatt Big Horn TL3 Long Action DLC Med Tang Spiral Bolt Knob 20 MOA Rail less than 300rds Fired .........Mag Bolt Face right now but can be changed to whatever buyer wants (I have all) has a Timney Elite Hunter Straight Trigger install..........1200 Shipped FFL to FFL .......Would trade for TL3 Short Action or possibly an Origin or Solus Plus cash

WTF???


Login to view embedded media

Looking for $250 Shipped.

@ luckygunner .46 per on a 1K case tela FMJ steel non corrosive but magnetic

I've got a barely used MDT Triple Pull arms 17 with PRSS Pod Knobs i want to re home.
$700 Includes Shipping

So three weeks ago I get a call from PD not to far away from us. They are calling asking for help. I asked, "whats up?" Well we had our 7 dept rifles rebuilt by a gunsmith/shop all with your barrels and out of the 7.... only one shoots! That one just shoots small silly groups! I said really.... 1 out of 7 shoot? The officer says yes. Then he says... can I bring the worst two to you and have you guys look them over? I asked... didn't you call the shop that did the work and talk to them? Answer was yes and they took them back once already and had stuff fixed but they still don't shoot!

I said bring the worst two guns to me and will look them over for ya. He said thanks... the one rifle actually shoots 4moa!

So far we have fixed 4 out of the 6 rifles. They're suppose to bring the next two rifles in next week. Here are some of the things we found that where wrong.

Two rifles the bolt was hitting the back of the barrel. The other two the clearance at best was .004" which still isn't enough.

NV mounts installed backwards (yes doesn't effect accuracy but it's attn. to detail is my bitch there)

One rifle the trigger retaining pins where installed incorrectly. The pin that is suppose to be in the rear was in the front location which if there isn't enough stock clearance it would cause a fit issue between the barreled action and the stock.

One rifle actually had a burr or a piece of metal sandwiched between the recoil lug and the receiver face at the 6 o'clock position. When we took the barrel off to fix the bolt clearance and the muzzle crown... that small piece of metal actually left a small indent in the receiver face. Again goes back to paying attention to detail and what the hell your doing.

We had to fix all of the muzzle crowns on all of the first 4 rifles and rethread the muzzles.

I asked who's scope mounts are these? He said they where custom made! I'll get back to this further down in the reading but the mounts all had a negative MOA taper to them. Also two of the rifles the front screw was hitting the barrel threads. So we had a couple of decent not really expensive EGW 20moa bases and installed them for the first two rifles and ordered two more for the 2nd batch of guns. He said they knew they had issues with the mounts and had to use a shim on one of the rifles so they could get it on paper and have some adjustment to the scope. No more shims needed.

I would say not including range time or ammo cost... just in terms of inspection time and repair time we are averaging 7 hours for each pair of rifles.

When we got the first two rifles reworked (we actually didn't notice at first the scope mounts where messed up) I took them out to my range to test fire them. Figured better test fire them before we give them back to make sure they shoot good! I didn't want to mess with they're scopes and the focus etc... so I mounted my 8-32NXS scope. Scope was on a previous Rem. 700 in 308win so I skipped bore sighting it. That was a mistake! I sent the first round down range and no impact on the target. Said... crap... then I went to a 50 yard target... still no impact! WTF! So I pull the bolt out and to bore sight it had to remove the cheek piece as well. I look down the bore and the gun is pointed like 6" (best guess) below the target at 50 yards. So I start cranking on the elevation knob while looking down the bore and I see the cross hair coming up and then boom... the elevation knob stopped! I max'd out the adjustment and it's still really low on the target. I'm like WTF!!! So I pick the gun up and look at it from the side. That's when I noticed the neg. MOA on the scope mount. So with the scope max'd out at 65moa for travel... I held on the 18moa hash mark of the reticle and that gave me a .75" above center on the target for a zero. That's how I shot the first gun. Needed a total of 83moa just to be in the center of the target at a 100 yards. Then I/we changed all they're mounts out for something that was proper.

I did bring up with the Officer... I said, "hey were not bitching at all but we're not getting paid for any of this and I'll go on a limb and say you guys blew your budget request to get these 7 guns rebuilt but the next time I'm cruising thru your town headed to Marty's Pizza for dinner and you guys pull me over for speeding... tell your boss to give me a get out of jail free card please. He said... got ya covered!

I know the shop that did the work and bent isn't the word for it. As we worked on the first two guns I was actually pacing the floor at one point in time I was so mad.

Enjoy some of the pic's I took.

Later, Frank
Bartlein Barrels

Defiance Ruckus SA in 6.5CM. Proof carbon 24" barrel, EC tuner, Timney HIT trigger, MPA BA Comp SA chassis. Round count 250ish.

Catch and release, barreled action was purchased on the Hide. Decided to go another direction and buy a 6.5CM barrel for my SL setup.

Scope and rings are not included and are not for sale.


Barreled action $1750.
***SOLD*** MPA BA Comp $650.
EC tuner $150
Timney HIT $150

All prices are shipped.

Raider 365 with lots of extras.
Raider 365 pistol brace version
Flux forward optic mount
Flux carry magwell
1 stock plate to use on arm and 1 pistol brace plate to use on arm comes with it

All of it is unfired brand new. $825 shipped

FCU available if needed for $225 shipped as well

PayPal FF, Venmo or Zelle

I have some new in box vector X binoculars in stock ready to ship. Use code “SH07” it may work with other items in cart as well.

I've got a brand new in box RH MDT LSS Gen 3 Rem 700 Chassis in Black I want to rehome.
$325 shipped
NO TRADES.

Selling a Bartlein 25 cal 7.5 twist SS Heavy Varmint 29" blank.

Brand new. Arken EP-5 5-25x56 with mil reticle. I bought this for a 22 build, but ended up picking up a Leupold for a good deal the next day. My loss is your gain. $375 shipped. Can open the box for pictures if needed.

At the range prior to my Tikka .223’s first shot, I’ve been removing the oil leftover from barrel cleaning. But I’ve been reading about how leaving this oil in the barrel may help prevent copper buildup from the first few shots, and that some shooters will run a patch with traces of graphite down the barrel prior to shooting in order to also prevent coppering. Has anybody observed increased copper buildup or long tern issues from a dry barrel as oppossed to an oiled one or one with a trace of graphite for the first few shots? Thanks

At the range prior to my Tikka .223’s first shot, I’ve been removing the oil leftover from barrel cleaning. But I’ve been reading about how leaving this oil in the barrel may help prevent copper buildup from the first few shots, and that some shooters will run a patch with traces of graphite down the barrel prior to shooting in order to also prevent coppering. Has anybody observed increased copper buildup or long tern issues from a dry barrel as oppossed to an oiled one or one with a trace of graphite for the first few shots? Thanks

I have decided to step away from PRS for a while, so this is up for grabs.
Around 1000 rounds through it, it hammers with all Lapua and SK ammo.

• Straight Pull Bolt Action
• 5020 2-stage trigger
• Heavy profile 23" threaded barrel 1-16 twist
• 30 MOA Picatinny rail
• Accuracy International AT-X Chassis
• Stock: tool-less length of pull, cheek height, and recoil pad height/cant
• KeySlot mounting points in the 3, 6, and 9 o’clock positions
• Integrated ARCA rail
• Integrated barricade stop

It comes with the folder attachment and long bridge
I added an MPA grip with thumb shelf
homemade side and internal weights
Bugholes aluminum rear bag rider
It comes with 4 magazines with extended basepads
the scope, mount, barricade stop and bipod are not included

$5250 shipped to your ffl-sold pending funds

Anybody have a set of Spuhr SR-4000 rings laying around they want to get rid of?

Brand new in box vortex radian carbon fiber tripod with ball head combination. Never been used. $450 shipped. PayPal f&f only.

Selling my lightly used Nightforce 7-35x56 F1 ATACR, MIL-XT reticle. Box and accessories included, mount is not.

More pics upon request. PM me with any questions. I don’t have any feedback here but I have tons on ar15.com - Username Super_Trouper

$2550 plus shipping - I accept PayPal, Venmo, or Cashapp.