List attached as a picture.

Used mostly for loading all my PRS 6GT ammo, saves a ton of time on brass prep and powder + seating if your trickler(s) can keep up. Produces very high quality ammo.

Also have toolheads configured for 9/223 bulk loading.

Located in east TN, really prefer a meetup vs. shipping. Can meet at Coleman Creek NRL hunter in a few weeks, and willing to travel within a reasonable distance to get a deal done.

If someone wants it shipped, I'm willing to work that out too, just not my first preference.

Not looking to separate/part out.

Happy to get on a call etc to chat about it.

$2500

I was loading 308win today. Cases are Lapua on their third loading. FL sized, and trimmed with the Dillon rt1500. I put a Lyman M die in station 1 of the loading toolhead, because everything I read said that I would not need to chamfer. Somewhere I went wrong. I was seeing copper shavings after seating. Then re read M die directions, and it said to flare 1/16" at mouth. I am guessing if I go this route I will need to crimp said brass after seating? I had gone this route because everything I had read says the Dillon size/trim die really shrinks the neck and that I needed to expand it back up to .306 and that the M die would do it and also eliminate chamfering. WIN WIN, or so I thought.

The questions I have now are

1) how bad is this going to affect accuracy?
2)Should I just go back to chamfering before going onto the loading toolhead?
3)Is their a better die for this job than the Lyman to expand?
4) Is their a better die to trim with than the Dillon?

I'm loading up 2500 or so rounds for a belt fed 1919, using cloth belts. When I seat the bullet to 2.8" (actually 2.790") I'm still .06" or so short of the cannelure. If anybody can measure a NATO ball/FMJ round for me and tell me the OAL, that would be great.
I may have a mix of pulled/new 308 and 30-06 bullets and I do have a mix of FMJ, API, AP and tracer bullets. This does complicate things, but if I get the OAL for a FMJ, I can go off of the ogive for the others.

Doing some bullet clean out, prices do not include shipping

i have the following

700 108 ELDM same lot - $200 -SOLD
500 109 ELDM same lot, came loose packed from GAP - $150 - SOLD

500 Berger 108 EOL same lot - $200 - SOLD
400 Berger 95 VLD, and 1 box opened, looks like roughly 50 left, same lot - $150

1000(ish) x-treme 124gr 9MM, one box opened, unsure if any were used
250 Berrys 124gr 9MM
250 Berrys 115gr 9MM
All 9MM - SOLD

500 175 SMK - $150 - SOLD

How hard is it to disassemble and reassemble?

Garage level stuff or send it out level stuff?

$40 shipped

Friend got an armalite ar10b when his dad passed.

He wants to use pmags in it to match other rifles he has.

He asked me if he could change the lower to work.
My initial searches it looks like the ar10b upper needs a modification to work with pmags?
So change the lower, AND modify the upper?
If that is the case then maybe it would be best to just buy more of the mags that fit the B and leave it as is?

Thanks for any input.

I had Lee custom make a seating plug for 140 gr ELDM’s and by the time it came, i had switched calibers to 6mm GT.

$18 shipped.

Vortex Impact 4000

Like new condition and comes with everything as it did new.

This has only seen 2 range sessions and is in perfect condition.

Asking $sold

Excellent condition, with almost no use. Stock, no upgrades.

Will include some bits and bobs - a couple mags, some barrel shims, stuff like that. Getting out of the 10/22 game.

$900 shipped from my FFL to yours.

Arken EP5 5-25x56 FFP Mil.
Comes with .092, and 1.26 rings, sunshade, flip caps, rubber bikini caps, turret tape, and throw lever.

Looking for $500 shipped.

As shown. Missing piece is missing. Maybe one of you with better welder-fu than me can make a repair?

$40 delivered by usps.

I have a Curtis Axiom 6GT barrel. Approx 850 rounds. Was running 115 DTAC @ 2780, ES-8.5, SD-3.3.

RCBS Matchmaster Dies w/ .266 bushing, and 6GT modified case.

Little crow, and Lee case trimmers.

Looking for $350 for everything above shipped.

Some of the workers have obviously worked with weapons stamped BYF, S/42, etc..

Login to view embedded media

XLR Element 3.0 magnesium chassis for a Remington 700 SA. Includes AR buffer tube, Magpul CTR, and Magpul K grip.

$500 shipped

Lightly used Sig Kilo 10K Gen 1 LRF binoculars. Excellent condition and clean glass. I have original box, harness, wind meter and Outdoorsman’s tripod stud. Asking $1100 shipped and insured with payment via Venmo. Tracking to follow ASAP.

Please PM if interested. Happy to FaceTime for verification.

I have some Brownells magazines, They all suck.

My Vietnam era magazine has always been flawless no matter what, when you press the follower down, the entire thing goes down, it cant twist. All the other magazines, when you push the follower down in the center the front goes down first, like the follower is thin and not supportive. The unstabilized follower I believe is my problem. Rather than junking these all I'd like to go through them and get them to work.

My question is..... is there a "go to" follower and spring that is the best? I have some 20rd and 30rd mags.

Login to view embedded media

I've used this to just store reels around the shop. No field use. Zippers work as they should, shoulder strap included - no stains, odors, damage etc. $250.00 new... It's the old style camo.

$100.00 TYD USPS Priority. Paypal Only, friends and family with no note or add 4% for fee's and I ship to the address on file.

Like new RCBS Matchmaster. Like new.
$675 shipped. PayPal F&F or Venmo.
Only reason for selling is I upgraded to the V4 auto trickier with A&D FX 120i kit. Works perfectly. Bought 4 or so months ago.
Questions call or text 615-866-8036
Nashville, TN area

View attachment IMG_3154.jpegView attachment IMG_3153.jpegView attachment IMG_3152.jpegView attachment IMG_3155.jpeg

Lightly used. still in working order.
300 bucks shipped.

Madriver Outfitter's Flip's Leader Wallet (New) - Link: https://www.madriveroutfitters.com/p-333-flips-leader-wallet.aspx
Croakie's Wrist Float (Used)
Trout and Their Food by Dave Whitlock (Like New)
The Orvis Guide to Beginning Fly Fishing by Tom Rosenbauer (Like New)
(2) Large Orvis Fly Reel Covers (New)
(1) Medium Orvis Fly Reel Cover (New)
(3) Orvis Felt "Spool" Bags (Like New)
(2) Tacky 3x5 Fly Docks (Like New)
Orvis Tiefast Knot Tying Tool (Used)

$60.00 TYD USPS Priority. Paypal friends and family with no note or add 4% for fees. If using gifts and services I will only ship to the address on file with PayPal. First "I'll take it", followed by a PM for payment gets it.

I've got 2 wiebad cheek pads for sale.

One is black, one is multi cam.

$35 shipped for each. $60 shipped for both.

Excellent Used Condition, includes the accessories shown in photo. Gen-2 forend.

$325/shipped via PPGS.

I need some help. I currently have a Tag Gear molle belt that I have been using and it works ok. This one:


I don't shoot comps so I don't think I want a stiff ass over/under USPSA style belt set up but I think I do want to try some kind of over/under belt set up rather than the padded molle style I have. Or do I?

I would just like something rigid and comfortable with less bulk to mount a pistol and a few mag pouches on for range use. No larping or SHTF in mind.

Any suggestions?

Can’t believe that I never found this before. I’m a 21 yr retired Marine that fought for our country and now I’m in God’s army living and working for him in the most beautiful place in the world. I found this site in prepping for my first sheep hunt and prepping my new 6.5 creedmoor from Fierce that shoots .375@100yrds. Topped with a NF NX8 that my wife got me for our anniversary. God Bless