Filter

Hornady 4DOF ZERO Angle

Couple questions on Hornady’s Zero Angle…

I’m using the Measure Impact Location feature in the app and a picture of a 14 shot group. It was shot at 100yds indoor so i left the wind values at zero.

Typically when i zero this gun my 3-5 shot groups are less than 1/2 MOA. This 14 shot group (pics attached) widened out to about .9 MOA.

I think I saw in one of their videos that it’s OK not to float and zero the turrets after performing the group analysis because the app knows where your POA was in relation to your impacts. Is this the case cause it’s messing with my head?

IMG_8286.jpeg
IMG_8283.jpeg
IMG_8288.jpeg
IMG_8287.jpeg

SOLD LH MPA ESR SA700 - Midnight Bronze

Selling a used left handed MPA ESR chassis in Midnight Bronze for R700 SA. Includes competition side rails, fore end weights, GrayOps XL side rail weights (2 steel / 2 aluminum) and steel/aluminum spigot mounts. $1050 shipped obo paypal ff

Attachments

  • ESR3.jpg
    ESR3.jpg
    725.1 KB · Views: 131
  • ESR2.jpg
    ESR2.jpg
    791.6 KB · Views: 127
  • ESR1.jpg
    ESR1.jpg
    745.9 KB · Views: 126
  • Like
Reactions: Stevenhansell

Aero Solus stock barrel change is absolute war

I got my tools ready.

1. Aero Solus action wrench

2. Barrel vise

3. 7/8th socket

4. Very large Torque Wrench with breaker bar


I'm honestly to tired to make this a long thread, but holy hell what does Aero do to their stock barrels? Do they weld them in?

- I tried it normal. The barrel slipped and ruined my finish
- I tried wrapping painters tape around the barrel. The barrel rotated and ripped up the tape and now the barrel needs goo gone.
- I tried heat, lots of heat. Eventually I burned my finger but the barrel still slipped in the vise.
- I tried wrapping the barrel in sand paper. I went out and got actual fucking sand to put between the barrel and the barrel vise.

Thankfully there is a machine shop downstairs from my friends shop. Now it was their turn.

- They tried a barrel vise block in a massive vise. It still slipped.
- They tried putting the vise block 90 degrees (vertical) in the largest vise i've ever seen with a 26'' breaker bar. It still slipped.

Enter the machine shop guys wife

Question: How much do you care about the stock barrel? Answer: I'd like it to shoot, but it already looks like hell I can't sell it.

- She takes it over to a belt sander, and I shit you not, sands two flat spots in the barrel.
- The barrel goes back in the giant vise block, this time raw, at 90 degrees, with the 26'' breaker bar.

IT FINALLY FUCKING GIVES WAY!!!!!

PXL_20250515_235304207.jpg

In the end the stock barrel looked like this.

Putting the new barrel in was shockingly easy. Swab some antiseize, put barrel in barrel vise, hand tighten action, use action wrench + torque wrench set at 75 ft/lbs, add chassis and optic and poof!


PXL_20250515_181525379.MP.jpg Shadow.jpg

But my dark lady looked ready for the range tomorrow.

24'' Bartlien barrel + muzzle break.


If anyone asks you to help them change your aero solus barrel, and it came from the factory as a barreled action? Laugh at them.

- Local

Firearms **SOLD** Rare Smith Enterprise Crazy Horse M1A ** Price Drop**

Up for sale is my SEI Crazy Horse built on a Sage EBR Chassis. Less than 100 rounds fired. Asking $7.5K for rifle only. $10.5K including SB 4-16X42 PMII, Spuhr, and RMR.

Attachments

  • SEI M14 Receiver.jpg
    SEI M14 Receiver.jpg
    1.1 MB · Views: 174
  • M1A Left.jpeg
    2.6 MB · Views: 204
  • M1A Right.jpeg
    2.8 MB · Views: 134

SOLD Vortex PST Gen 2 5-25x50 MRAD package

Vortex Viper PST Gen 2 5-25x50 MRAD EBR-2D with Seekins low rings, Vortex Defender Caps, Vortex neoprene scope cover and MK Machining throw lever and parallax knob. Scope is like new. Comes with box, sunshade, bikini covers and all factory paperwork.

Full package 850 OBO shipped.

$775 without rings.

Will sell rings for $90 if scope buyer doesn't want them.

IMG_6521.jpeg
IMG_6520.jpeg
IMG_6519.jpeg
IMG_6518.jpeg
IMG_6517.jpeg
IMG_6515.jpeg
IMG_6516.jpeg

SOLD Seekins 300PRC

Rifle is like new. Barrel has 60 rounds through it. Rifle was sent back to Seekins for the bolt upgrade, which replaces essentially everything except the barrel and it hasn't been shot since getting it back. Practically a new rifle. Trigger was upgraded to Triggertech Special flat shoe that is new and unfired as well. I have a Vortex Viper PST Gen 2 5-25x50 MRAD to package with it for a great ready to go elk package. Rifle will ship in hard case.

Rifle with Triggertech Special ($180) and extra Seekins carbon fiber magazine ($100). $1600 OBO
*Will break out trigger or extra mag

Vortex Viper PST Gen 2 5-25x50 MRAD like new W/ Seekins low rings, mk throw lever and parallax knob, Vortex Defender caps and scope cover. $850 OBO

Package $2300 OBO

*Hellfire brake shown in package picture is not included.
IMG_5437.jpeg
IMG_6525.jpeg
IMG_6524.jpeg
IMG_6523.jpeg
IMG_6522.jpeg
IMG_6514.jpeg
IMG_6513.jpeg
IMG_6511.jpeg

Bolt upgrade.jpeg

Attachments

  • IMG_5438.jpeg
    IMG_5438.jpeg
    7.2 MB · Views: 26
  • IMG_6526.jpeg
    IMG_6526.jpeg
    2.3 MB · Views: 27

Lilja NSW Recce 15.1 barrel twist

Hey folks, school me up quick on something…
I went to order a Lilja recce barrel. The 15.1” length the supplied for one iteration of the NSW Recce rifle. Lilja tells me the only make those in “drop-in ready” format in a 1:8 twist.
I thought the NSW Recce was a 1:7 for the mk262 ammo and heavier, no?
Were the barrels they supplied for the NSW Recce Rifle in fact 8 twist? If so I’m guessing they will handle the 77 SMK fine?

I know others make a Recce barrel in 7 twist but I just really like Lilja and was surprised they were 8 twist.

Any experts care to set me straight and/or opine on how an 8 twist will
So with mk262 ammo? I’ve also got a lot of Barnes 70 tsx (so fun!!!)

On the subject of companies screwing over Americans....


Yup. dominating a huge prepaid market by tailoring their companies help (and prey on) illegals.

Advertising, setting up stores at illegal crossing points, all kinds of great marketing to specifically get rich(er) off of illegals.

Now, do the executives who orchestrated this strategy get to go to jail?

Wonder how much $$ they got from USAID as well for those free phones given to Migrants. And Obamaphones... how much did executives give to democrat campaigns? NGO's who helped bring in illegals? Knowing that their first stop with the money they didn't hand over to the Coyotes... is going right to a prepaid phone.

How hard are they fighting against the current enforcement efforts? How much money are they giving to get people elected who will open the floodgates again?

Anyone asking these questions? Because this is why we are supposed to have a media. Or a Senate. Or a House. Or an FCC. Methinks T-Mobile should have its spectrum yanked and re-auctioned to a company that does not get rich promoting illegal border crossings.

Sirhr

SOLD Leupold Mark 5HD 7-35 PR2-MIL & Sphur 5001 mount

Leupold Mark5 HD 7-35 Pr2-mil -$SOLD

-light use for 2 months (300rds suppressed on my 6 dasher off a bench.
-glass is perfect
- light marks on parallax cap(shown in pic)
-comes with everything from factory
-only reason for selling is I got a ZCO
-includes sunshade and caps


Sphur 5001 -$Sold
-only used on the 7-35
- comes with everything from factory


PayPal F&F

Prices are shipped and insured


IMG_1590.jpeg
IMG_1791.jpeg
IMG_1792.jpeg
IMG_1793.jpeg
IMG_1794.jpeg
IMG_1795.jpeg
IMG_1796.jpeg
IMG_1798.jpeg
IMG_1799.jpeg
IMG_1800.jpeg
IMG_1801.jpeg
IMG_1804.jpeg
IMG_1802.jpeg
IMG_1803.jpeg
  • Like
Reactions: Bayouhunter

SOLD Nightforce ATACR 4-16x42 F1 Mil-XT

Excellent condition NF 4-16x42 F1 model # C615 with Mil-XT reticle. Comes as pictured with box and flip caps. Glass and mechanics are perfect, a couple very light/small cosmetic marks on the tube.

$2140 shipped
**sold to faylix**

Attachments

  • IMG_2029.jpeg
    IMG_2029.jpeg
    1.1 MB · Views: 173
  • IMG_2028.jpeg
    IMG_2028.jpeg
    1.7 MB · Views: 171
  • IMG_2027.jpeg
    IMG_2027.jpeg
    1.2 MB · Views: 131
  • IMG_2026.jpeg
    IMG_2026.jpeg
    1.6 MB · Views: 126
  • IMG_2025.jpeg
    IMG_2025.jpeg
    1.5 MB · Views: 118
  • IMG_2024.jpeg
    IMG_2024.jpeg
    2 MB · Views: 166
  • Like
Reactions: Jtn605

SOLD Accu-Tac PC-4 ARCA Spec QD bipod

Excellent condition Accu-tac PC4 bipod. This is the ARCA QD model. Comes in factory box. There are a couple marks on the legs and mount as shown, but really nice condition overall.

$365 shipped

Attachments

  • IMG_2038.jpeg
    IMG_2038.jpeg
    1.5 MB · Views: 56
  • IMG_2039.jpeg
    IMG_2039.jpeg
    2.2 MB · Views: 35
  • IMG_2040.jpeg
    IMG_2040.jpeg
    4.4 MB · Views: 39
  • IMG_2041.jpeg
    IMG_2041.jpeg
    2.3 MB · Views: 40
  • IMG_2042.jpeg
    IMG_2042.jpeg
    2.4 MB · Views: 43

SOLD WTS: Noveske Pistol with tons of Extras! Price Drop!

Looking to sell this Noveske pistol build. Super nice. Gen 1 lower, Noveske-marked VLTOR upper, Rise Armament single stage trigger, Fail-Zero BCG, KAC rear BUIS, Gen 2 Law Folder w/ extra o-rings, SB Tactical brace, Sprinco blue spring, H2 buffer, Noveske Super-Badass CH, Chopped NSR-15, Noveske 10.5" SS barrel, Noveske gas block, Surefire. Lower has been cerakoted Sniper Gray and the handguard has a matching diagonal stripe of the same. Barrel has < 200 rounds . Aimpoint Duty RDS is brand new with an Aimpoint LRP mount. Never zeroed. Entire package $1500 shipped and insured to your FFL. No trades, PayPal F&F or Venmo. Please PM me directly and please don't post in this thread. SOLD SOLD SOLD
IMG_4588.jpg
IMG_4589.jpg
  • Like
Reactions: hcsd54 and RC556