Filter

My solution to protestors who interrupt Congressional proceedings

Bag 'Em and Gag 'Em
Takes the fight right out of them. Surprises them and shuts them up, very disorienting, unable to effectively resist, safer for the officer, and keeps them out of the camera. Had this done to me in Special Forces, don't see a problem.
1747320477378.png


And, as an interesting sidenote, one of the SF missions is CSAR (Combat Search and Rescue). Back during the Cold War, we would likely rescue a downed pilot 300 plus miles inside occupied territory. We would then insert them into the "pipeline" with the underground to get them back to friendly lines. It was SOP to bag and gag the pilot until we could verify his identity. Back then, a very slow process. Team equipment included a finger print kit and a camera. We would use the Fingerprint Identification System and send the data back by burst communication. We could also take photo's and a physical copy of the fingerprints for pick up by aircraft.

Surprise Air Force! Believe me, I don't enjoy this, LOL.

1747329131122.png


If he was really lucky, he would get an "E" ticket ride of his life on an MC-130E with the Fulton STAR recovery system

1747329363506.png


CIA Pilatus Porter. We would suspend a package on a line strung between two poles and the Pilatus would use a hook to snag the line and the attached package. I trained with the CIA using this technique. The Pilatus would snag the line which was only about 15 feet above ground level.

1747329796424.png


Sorry no pictures.
secret squirrel.jpg

Accessories *SOLD* Mack Bros S/A *NEW*

For sale Mack Bros Evo II stainless steel S/A. New in box. .480 (standard) bolt face with 20moa base. Will work with bdl cut or Hawkins m5 bottom metal.
Decided not to build this project.
$775 shipped to your FFL in the lower 48. Thanks for looking

Attachments

  • image.jpg
    image.jpg
    2.4 MB · Views: 91
  • IMG_2876.jpeg
    IMG_2876.jpeg
    3.1 MB · Views: 91
  • IMG_2875.jpeg
    IMG_2875.jpeg
    3.3 MB · Views: 93

Accessories *SOLD* PROOF CARBON .22CAL

Up for sale a new in box and plastic wrap. Proof Carbon fiber .224 1-7 twist barrel blank. 4 groove and sendero contour. Nothing much to say other than I just decided I wasn’t going to build. These barrels are $899 most places you look. I will take $775 shipped in the lower 48. Thanks for looking. Message me with any other questions. No trades

Attachments

  • image.jpg
    image.jpg
    2.1 MB · Views: 123
  • image.jpg
    image.jpg
    2.2 MB · Views: 120

AR15 tight chamber?

I'm about to start loading for an AR15 223 Wylde with a 20" krieger 7.7 twist. Taking some case measurements on fired brass and coming up with 1.457" on the Hornady comp gauge. Reason I believe it's on the tight side because my LR bolt R700 223 wylde has a tight chamber and the brass from that rifle comes out at 1.457"

Is this normal for an AR? Not super familiar with them. Also read where ARs need about 3-4 thou bump and 3-4 neck tension, which hopefully won't be an issue with my current die set up which is just an RCBS FL sizer. I also have a Redding FL bushing sizer with a .248" bushing for my bolt rifle with lapua brass at a .250" OD loaded neck. It won't work for the AR/federal brass which is like .247" Loaded neck. So I'd need like a 243"-.244" bushing for it. Seating is done with a Forster ultra micrometer for both rifles.

SOLD Vudoo Gen 1 90*

I bough the rifle used, and have put just over 300 rounds through it. Runs flawless, and shoots very well. Comes with greyboe ridgeback and vudoo dbm, Triggertech diamond flat, Factory 10rd mag, and 681 rds of Lapua center X.

Looking to get $1,800 shipped OBO for everything.

Attachments

  • IMG_0534.jpeg
    IMG_0534.jpeg
    4.3 MB · Views: 212
  • IMG_0535.jpeg
    IMG_0535.jpeg
    2.4 MB · Views: 188
  • IMG_0536.jpeg
    IMG_0536.jpeg
    2.1 MB · Views: 149
  • IMG_0537.jpeg
    IMG_0537.jpeg
    2 MB · Views: 175
  • IMG_9986.jpeg
    IMG_9986.jpeg
    2.2 MB · Views: 209

SOLD PRICE DROP. Mil-Spec Nightforce 3-15 w/H58 Reticle

I have for sale a Mil-Spec FFP Nightforce 3-15 with H58 reticle for sale. I am out of the clone game and this is the last piece of glass that I have to move. Priced for quick sale at $1750.00 shipped.

USPS money order or Venmo only.

PM me with any questions.

Attachments

  • IMG_2018.jpeg
    IMG_2018.jpeg
    1.2 MB · Views: 94
  • IMG_2015.jpeg
    IMG_2015.jpeg
    1.2 MB · Views: 92
  • IMG_2016.jpeg
    IMG_2016.jpeg
    1.3 MB · Views: 88
  • IMG_2017.jpeg
    IMG_2017.jpeg
    1.1 MB · Views: 93

SOLD Leica Geovid Pro AB+ (FDE) 10x42

Like new pair of Leica Geovid Pro AB+ 10x42’s w/full AB on board.

These are like new and only used at a few matches. No marks and glass is pristine. I’ll throw in the Leica Stabilite tripod adaptor as well.

$OLD shipped


Attachments

  • IMG_1066.jpeg
    IMG_1066.jpeg
    1.7 MB · Views: 31
  • IMG_1067.jpeg
    IMG_1067.jpeg
    1.4 MB · Views: 24
  • IMG_1068.jpeg
    IMG_1068.jpeg
    1.2 MB · Views: 20
  • IMG_1069.jpeg
    IMG_1069.jpeg
    1.5 MB · Views: 24
  • IMG_1070.jpeg
    IMG_1070.jpeg
    1.4 MB · Views: 21
  • IMG_1071.jpeg
    IMG_1071.jpeg
    1.4 MB · Views: 23
  • IMG_1072.jpeg
    IMG_1072.jpeg
    1 MB · Views: 22
  • IMG_1073.jpeg
    IMG_1073.jpeg
    1.5 MB · Views: 24
  • IMG_1074.jpeg
    IMG_1074.jpeg
    2.5 MB · Views: 26
  • IMG_1075.jpeg
    IMG_1075.jpeg
    1,009.8 KB · Views: 24
  • IMG_1076.jpeg
    IMG_1076.jpeg
    1.7 MB · Views: 27

Any Long Range shooting or PRS within 1hr of Heber City UT?

Likely moving to Heber City UT and was surprised to see that the closest long distance range was 1.5 hours away in Perry.

Also noticed that the only PRS matches are North Utah and Central Utah - both about 2-3 hours away from Heber.

For those familiar with the area, is there any long distance shooting or matches closer than that? Or is there at least BLM land that’s safe to put out a target 500-1000yds where there’s not people shooting around you?