24” 6.5 creed carbon six barrel for sale. It has about 320 rounds through it, and I’ve never liked the way it takes my reloads. I’ve sent it back in once to have the chamber double checked and was told it’s fine, but I’m tired of messing with it. Probably a great option if your shooting spec rounds.

Looking for $200.00 + shipping or FTF in DFW area.

Brand new in box, never mounted or anything. $400shipped. Can pull it out of the box and take more pics on request.

Looking for a new, or very lightly used (<200rds), barrel for my MRAD. Specifically one chambered in 6.5 or 7PRC. May also consider a 300PRC barrel. Let me know what you have.

I have a new in the box manners high plains camo elite hunter stock . $735 gets it delivered to your doorsteps anywhere in lower 48 ! Get it while it lasts !

Carbon six barrel blank 30 cal 1:9 twist magnum contour 27” . The first person with $575 gets it with delivery included anywhere in the lower 48

I'm looking to start a barricade/prop training event at my local range. My intent is to line up tank traps and other props and steel at various ranges and run it as a hot range so people can shoot from wherever they want. It needs to be viable for all experience levels so my biggest questions are the safety aspects. I assume the best procedure is to load once you get to your chosen prop and chamber when you're level/pointed at the berm. Is it best to go on safe when moving at all or just when you break position? I need to make it as simple as possible.

If anyone has run something like this please give me any suggestions.

Cedar Creek Precision – Monthly Long Range Match | Western KY





Looking for a match that breaks out of the square range routine? Come shoot with us at Cedar Creek Precision in western Kentucky. This monthly match brings a true field-style experience with natural terrain, multiple firing positions, and a fast-paced, no-BS format.





Match Style:


Find, Range, Engage – You’ll be working real-world scenarios with hidden targets, ranging on the clock, and engaging from multiple natural and improvised positions. Barricades, uneven ground, and terrain-driven angles keep it interesting.





Key Highlights:

• Two separate ranges with targets well past 1000 yards
• More than a dozen firing positions across varied terrain
• No square range setups – expect grass, hills, trees, rocks, and brush
• Positional stages with barricades, natural obstacles, and time pressure
• Varying target sizes — precision counts
• ~100+ rounds required — bring enough and a good dope card
• Fast-moving but laid-back environment — shooters helping shooters

When: Monthly — PM for upcoming dates or follow us for updates. 2nd weekend of every month. Also find them on practiscore.

9-10 August 2025
13-4 September 2025
11-12 October 2025


Where: Cedar Creek Precision –
14270 Melvin West Road
Hopkinsville, KY 42240


All skill levels welcome — experienced shooters, new long-range guys, and everyone in between





If you want a challenging but fun match to sharpen your field skills, this is it. We keep it efficient, honest, and real. No gimmicks, just good shooting. PM for sign-up or questions.

APA Little Bastard Gen 3 Muzzle Brake. 6.5 cal, 5/8x24. I have two of the six tuning screws. $100 shipped.

I have a BCM 14.5 rifle with stock bcm buffer system. I shot out the stock barrel, rebarreled with Gieselle 14.5 chf. Superlative adjustable gas. Stock bolt. I ran it in a class for 1500 rounds. No problems. I put on an sjc titan brake. The rifle runs but will not lock back on the last round. Even with full gas. When you hold bolt stop down on last round, it locks back on the carrier not bolt face. I put in a jp scs with stock spring out of another rifle and it works with full gas and locks back, but move that gas 1 click and doesn’t lock back.

What do I need to change on this? Lighter spring? Carrier? Buffer weight? Thanks!

Selling Mointain tactical ARCA rail for Tikka t1X and T3X.

Purchased for a T1X UPR and it does not fit!

Asking wasb$65 now $50. Includes shipping.

GrayOpsNC AMP ELITE "Arca Multi-Plate" for sale.

Asking was $200 now $150 includes shipping.

Selling Atlas bipod with AREA 419 Arca mount.

Model is a BT10. I am the original owner and purchased in the 2020 time frame.

Asking $200. Includes shipping.



Unit is in great shape. Just never use it.

Met up with a (woman) friend, her (woman) friend and kids last night for live music and fireworks show. I'm about 2 minutes away and she texts me, "can you bring a blanket and/or chairs or did you leave already?". Well I certainly didn't bring any blankets --honestly I figured the women would

I thought about it a minute and said, not to worry, I got just the ticket here right with me, I do.

Now I didn't have a blanket, specific, but I did have a MidwayUSA deluxe competition shooting mat and a folding chair! I get to the spot, unroll that mat, she takes a sit, moves around a little and says "ooh this is nice!"

Hey, only the best for you !!

Brand new never installed rings fromArea419.

Asking was $140 now $100. This amount covers FEDEX shipping.

At least it feels the same kind of witchcraft as reading tea leaves. Unsure the degree to which it's possible but I'm looking for help reading the targets and determining most likely points of error in my shooting. I'm struggling to shoot consistent groups and to rein in the flyers.

I seem be able to put 2-3 on or near one another, then the remainder are usually either high but about on horizontally, or high and right. From time to time get one or two a bit left.

To build the position, I lay down directly behind the rifle so that the centerline of the rifle is about directly under my left eye. Place firing hand in the grip of the stock, lift the rifle up (no grip/squeeze) and bring the butt downwards into the shoulder while setting the rear bag. Adjust the bag fore and aft to achieve desired POI (smaller adjustment, macro already achieved with bipod height).

The last target I shot with firing hand further down the grip and trigger finger really low on the trigger, basically brushing the trigger guard. This seems to have improved the on-target result some.

On the fliers, when the shot breaks, I can't tell what's going on. Like I don't observe the reticle on the target where the bullet impacts. With a pistol I immediately can tell when/why I shanked one, but here, they feel good.

The targets:
All shot at 100 yards
Dots are IIRC 5/8", pasters from a Shoot N See
5 shots
Prone off a mat
Each group I completely reset position.
Pictures ordered first to last

Rifle & Gear:
Tikka T3X CTR .223, Left Hand
Mathews Fab adjustable cheek riser
ARC M-Brace high
Burris XTR 5.5 - 30 SCR2 MIL
Accu-Tac PC5 w/Caldwell sling stud to pic rail adapter
Taylor was Here rear bag
Norma Golden Target GTX 69gr

Any insight would be really appreciated.

Getting ready to pick up a 67i for some hiking the wife is going to be doing in the west. Any comments good or bad? Something better? I want her to have something where she can get help if injured. Etc. GPS and mapping/directions/tracking.

Purchased and never taken out of the box...new condition.

The Nightforce Ultramount was originally designed to meet the highest demands of USSOCOM's S-VPS, R-VPS, and P-VPS riflescope programs. The UltraMount has been thoughtfully engineered with a combination of aluminum, steel, and titanium to provide exceptional strength, minimal weight, and remarkable rigidity. This leads to a rugged and repeatable mounting solution ideal for bolt guns and gas guns alike. The UltraMount is available in Black or Dark Earth, 1.54" or 1.93" heights, and 0MOA and 20MOA tapered options.

Lightly used on my SIG Cross. Had planned to use it on a HIT Pro (currently mounted on this) for PRS and decided to go with something different. There are a few dust particles in the pictures. Lenses are flawless.

$1750 firm including shipping to lower 48.

I am about to purchase a spotter and need some quick last minute advice. I am torn between the following:

• Vortex Razor HD (Gen 2) 22-48 x65 or 13-39x56 -- both straight, not angled
• Leupold SX-4 Pro Guide HD (Gen2) 15-45x65 or 20-60x85 -- both straight, not angled

Primary use is glassing for competitions (long days on the glass) and then some long range observation. Yes I know, a good pair of binos will do, but I'm looking for that high mag power.

Inputs on glass quality and use with a tripod. Need a taller tripod, recomendaions on tripos welcomed.

Sold

Mark 4HD 2.5-10
183738
Brand new in box $1000 obo shipped
Make an offer want to move this quickly!

So I recently had a 6.5 GT take a 50 fps nose dive in the middle of a hunter match with 1600 rounds through it, measured .075 erosion to the lands.
I adjusted seating depth, increased the charge .5 grains and put a few hundred rounds through it before things really started going to shit. I was running 34 grains N150 with 142 smks, shocked I didn't see at least 3000 rounds. It was a Benchmark Sendero.

I'm running a Criterion 223 wylde for PRS, it's been a picky bastard from the beginning but shoots 75 vlds real good toucking the lands, loaded with 24.5 grains N150.
I'm getting ready for the finale Aug 23rd and my accuracy is starting to drop! I'm at 2200 rounds and the lands have eroded to the point that I can't seat into them with the bullet still in the short 223 neck..
WTF is going on? Thought I'd for sure get 4000 rounds from a 223..

Is N150 super hard on barrels?

Mk5 HD 7-35x56 with PR2-MIL reticle
Purchased new in 2024, have receipt.
In original box with all accessories and paperwork.
Includes:
Leupold MK4 High Rings
Leupold Competition Speed Dial
Flatline Ops Halo-X Level
Not splitting anything up.
No trades.
$2100 shipped and insured TYD, I cover fees.

Put it on a rifle but never shot through it. Basically new other than a little leftover rocksett. Comes with peel washer.

$90 shipped

Would also trade for same brake with 1/2x28 thread pattern.

View attachment IMG_4593.jpeg

I bought this for a rifle I sold but never installed it. Still in the packaging from AI, never opened it. My loss is your gain.


$530 shipped. Should save you $40 from MHS.