$285 shipped Conus PP (F&F) or Zelle.

I’ve been sitting on this stuff for a long while, but as I’m getting out of .308 it’s time to move the reloading goods along! Please note that this listing may change as I find and add more stuff!

This lot is basically overruns, factory seconds, and rejects straight from the Lapua/Berger factory back in Mesa, AZ. At the time, I knew a guy who worked there that was able to get these before they got scrapped and he sold them to those who wanted them. The brass needs to be sorted and processed to weed out the bad pieces, but from what I can see I’d wager 60-70% of the brass should be good.

The loaded ammo may have been rejected for a variety of reasons, from not being sized, seating depth being off, etc. My intention was to pull the bullets, weigh and record each charge weight and store the powder in a new container, cull the bad brass and re-size/trim the good, and re-assemble using a charge weight of the powder averaged from all the broken down loads. I figured it would make for good practice ammo.

For the rest of the brass, I’d planned on the same sorting process to cull what’s bad and resize/trim the rest and use them.

I basically took retail and multiplied it by ~40% to get my price on the components (60% off retail). Based on what I’ve seen when counting and sorting these, there’s probably a 30-40% reject rate on the brass, so I figure you’re still coming out ahead by a decent margin. If you use a kinetic puller, you’d get all the 167gr Scenars out in near perfect condition.

I can’t ship ammo, it’s a HUGE pain in the ass now that UPS has closed all Customer Centers within a ~2hr radius of me. If someone wants the rest, I’d consider splitting it off in large chunks (primed brass doesn’t need hazmat), but I’d prefer to sell to someone local-ish.

I live in Lafayette, IN, and I’ll drive up to around an hour for the right deal. That means anywhere from Merrillville to NW Indy (headed to Avon the morning of May 27th), and Wabash to I suppose I could go a little ways into IL for a western trip. I’m also trying to head to the Sterling, IL area via Chicago this Friday morning but it would need to be a FAST meeting as I’m on a tight schedule. I’m *NOT* meeting up for 100 pieces of brass, so don’t ask.

For the entire bundle, I’d like to see $1100 $1000 $950 $775 $525 OBO. That’s WAY below retail even after you cull the bad stuff out. I’m open to reasonable offers for the entire bundle however, as I need this stuff gone yesterday, it’s taking up way too much room!

***To help cut back on scammers, I WILL NOT PM YOU, YOU MUST PM ME!!!***

Brass (all LRP, never fired unless stated):
-Black Hills 1x (old and needs tumbled): 84
SOLD! -Lapua Primed: 307
SOLD! -Lapua Unprimed: 103
-NT Primed: 526
-NT Unprimed: 30
-NT Primed brass (“bad” primers: inserted backwards/sideways, not deep enough, etc.): 23

Projectiles:
-Hornady 168gr ELD-M: 494 (Lot# 2180918)
-Hornady 168gr ELD-M pulls: 86
-Unknown OTM pulls (probably 167gr, but my non-precision kitchen scale says ~171gr, obvious marks, FREE): 218

Loaded Ammo (for components, MTM/Berry cases included!):
-Lapua .308WIN 167gr Scenar OTM: 378
-Lapua FMJ, unknown weight: 115

Dies:
-Forster .308 Benchrest FL (P/N: 004501)

New take offs

$200 shipped
Zelle for payment

For standard (6.5CM) rounds, don’t ever remember using them. Selling as a pair, $100 shipped and insured. PP, Venmo, Zelle.

Thinning the collection, too many overlapping calibers! I built this for the intent of an event that never came together. I have used this off and on for bench shooting and a couple rock chuck hunts. Total of 550 to 600 rounds down the tube. 135 A-Tips with N565 at 3080 FPS then went to 140 Hybrids with H1000 at 3060 FPS. Note, the scope with mount, bipod, and can are not included in this sale, this is the rifle only.

Action: Impact Precision Short Action Right Hand
Barrel: Bartlein 24" Medium Palma 5/8"X24 (1-8 Twist)
Cambered at 150 freebore
Trigger: Trigger Tech Pro Curve Diamond
Stock: Manners PRS1
BDM: Badger Short Action Enhanced
Chambering, threading, bedding, assembly: Preece Precision (Garrett)

Also included: Henderson Precision Araca 11" rail, Wiebad stock pad, APA bolt knob.

Asking $2,950.00 and not interested in trades at this moment.
View attachment 6.5 PRC.jpg

12 round Gray Ops dasher / BR AW magazine. This is a great mag, I just have 3 and only need 2. Please verify you have an AW cut action before buying, Gray Ops website has good information on that.

This mag has hardly been used and has the updated magazine follower.

$150 shipped.

I will verify the state that I am shipping to is not commie-ran and allows for mags great than 10 rounds to be shipped there.

Nearly brand new Hawkins M5 DBM bottom metal.

Came with a near-brand new stock that I purchased, shows no signs of wear.

$200 shipped to the lower 48.

Hello, I have an MPA BA PMR PRO II coming in 6.5 Creedmoor soon and a Nightforce ATACR 7-35x56 sitting on the shelf for it.

Should I do rings or a scope mount? Any idea what height I should get to keep the bell of the scope closer to the barrel? (not too close but like a 1/4" - 1/2"

Any other thoughts?

Thanks!

STI 2011 in a commander size slide called the Guardian. 9mm. Not pictured but includes 2 more 126mm mags. Custom RH OWB holster from Gunners holsters in western NC. Excellent shape. Treebark gen 1 STI grip. These grips are impossible to find without spending a pile. This is an STI, not a clone, not a staccato. bull barrel no bushing. $1850 shipped

Another one of these threads sorry in advance. I am looking for a scope that is around the 5-25 power. Sub $750. I want at least 5 on the low end 25 on the max. FFP IR MIL, 34mm tube. This gun will sit on a varmint and target trainer rifle. I will also use it for 600 yard PRS matches. The gun is chambered in 223 with a throat and magazine that can accommodate heavy for caliber high bc bullets that the 22 arc would launch. My goal is to shoot varmint out to 600 yards. So my need on the clarity side is at 25 power I want to be able to see coyotes/dogs etc. at 600 yards.

I have looked at the following and am having trouble because I cannot look through them all side by side. Main contenders are strike eagle 5-25x56, Arken EP5 5-25 and the Gen 2 Athlon Ares ETR 4.5-30. I've never owned athlon or looked through one. The reticle seems good but I've read they have some tunneling. I really like on the strike eagles how the eyebox has almost no tunneling the body just disappears. The arken reticle and ir is actually preferred, I have found in low light fully illuminated reticles really block your vision. The strike eagles ilum is too much and not useful for low light. So in summary arken has preferred reticle as it's kind of hybrid target and hunting, strike eagle for the thin eyebox effect and athlon ares I have no experience and I hear lots of hyperbole on glass quality which I no longer believe what I read on the Internet lol. My thought is the glass on all three should be relatively close but you have people saying arken is just as good as night force atacr, same thing with ares oddly enough there are hyperbolic reviews of the strike eagle as well as a lot of people call them pieces of shit lol. Your insight and expertise is greatly appreciated...

172 ct 6.5mm 153 gr A-Tips. Same lot. Will not split into smaller quantities.

$100 shipped to the lower 48.

460 Ct 109 Berger LRHT bullets.

Will not split into smaller quantities.

$230 shipped to the lower 48.

New
Missing handle
$150

Mounted on a rifle just for display so technically an open box. Never used or had a shot fired from it. Basically brand new in the box. Rattler V2 35-640 $2,900 shipped to your door. Awesome price on a great thermal. Can do phone call and also please look at my feedback. Warranty will start on your purchase date. Thanks Zac

McCann Industries MIRS 700 SA – 20 MOA Right Hand | PN: MCCIND-1010-103 - $550 Shipped OBO - In excellent condition.

No screws included. I believe they are 6-48 holes and which use 8-40 screws. I saw an original package in an old image and the rail showed it came with - 4 x TORX SCREW 8-40 X 7/16 Long

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Selling my complete PRS rig, Reason for selling is consolidating down to one rifle to run both NRL Hunter and PRS Sportsman

Willing to part out. Prices listed next to components for part out. PM for phone number, happy to discuss. Price doesn't include shipping. Located in East Tennessee, but can meet at Coleman's Creek or Clinton House potentially.

Will sell complete for $5500

Lone Peak Fuzion SA 308 BF with a 28" Proof 1:7 chambered in 6GT (170 FB). Barrel has under 500 rounds - $1200 as BA or stripped action - SOLD

Nightforce ATACR 7-35 Mil-XT, a minor scuff on turret cap as shown, sunshade, NF Extreme Rings (High) - $2800 including rings, have windage cap and original box.

Manners TCS Artic Camo, sikes rail and clutch. Steel weights installed, have complete set of spare weights for rail and buttstock along with extra LOP spacers - $1500 for everything - SOLD

Triggertech Diamond 2 stage - $200 - SOLD

Area 419 Hellfire Match - $120 - SOLD

I'm open to selling complete, but will not hold, once someone pays for a part I will edit to reflect what is sold.

Im curious if there is a benefit to running a high end scope mount like an Area 419 or Arc M Brace on a budget optic like an Arken EP-5?

Is that smart money or stupid money?

I'll try to make this short. I added a clamp-on muzzle brake to my RRA heavy bbl varmint gun. Before muzzle brake, rifle shot consistent 1/2 MOA groups. I noticed a gradual reduction in accuracy over the next 500 rounds to where I thought my bbl was wearing out. Bbl cleanliness good through life of bbl. Total 1500 rounds through 223 Wylde bbl. Bore scope indicated nothing wrong with lands and grooves to indicate wear using the Teslong 45 degree mirror (90 degree view angle). However, when the Teslong passed through the crown, I noticed a fuzziness at the crown. I changed to the 25 degree mirror on the Teslong, As I approached the crown, I could see very deep channels leading to the crown. Those channels were not visible with the 90 view. My bbl had a recessed crown. The brake fit tightly and squarely to the muzzle. I have come to the conclusion that the addition of the brake was causing gas-cutting on the crown. I pulled the brake off and re-crowned the muzzle with a target crown. The gun is now back to shooting 1/2 MOA. I highly recommend anyone using a clamp-on muzzle brake examine your crown with a borescope using an angle other than 90 degree view. Sorry, no pics.

Took this on trade but don't have a home for it. Box was opened but the scope has never been out or mounted. I can get pictures but looks like any other brand new scope. No trades please.

$1300 shipped

Since there's nothing to see right now with the Karen Read trial, what do you all think of the Menendez brothers being resentenced yesterday and now eligible for parole?

I have a few of the small M40A3 operator manuals available which are fairly rare to find. $60 shipped per manual.

PayPal or Venmo preferred

This model is the 15 mil per rev turrets, ED glass, zero stop, rev indicator, 6 Levels of illumination (Red) on the Main Stadia With an “OFF” position between each setting. Great scope that ships in original box.

$1100 - Shipped

We were told there was no evidence they existed , where committing acts of terror and organized crime . One piece of evidence that they didn’t exist and were not terrorizing multiple apartment complexes was that local law enforcement hadn’t made any arrests . And that part of their argument was true .

Like new, Mount to gun that was sighted in and never used again. If you need any specific pics please let me know.

$325 shipped