The scope is supposed to have like 125 moa elevation travel but it looks like the turret is limited to 3 25 moa turns for 75 moa ,, is there any way to use the 125 total moas on the turret or is it gonna be limited to the 75?

Excellent condition Swaro EL 10x42’s. Got some range finding binos so I no longer need them. 1550 shipped in original box with everything they come with new. Cross posted

Area 419 hellfire brake 6.5 with 5/8-24 adapter and wrench.

Some carbon build up in ports and adapter. Used for several thousand rounds. Looks used, but good condition.

SOLD

Selling my trg bipod to switch over to an atlas with spigot. Bipod is in excellent condition and snaps it like it should. Asking 400 obo shipped.
PP FF, venmo

New, never fielded Gen 2 Atlas CAL (tall one) with picatinny mount that can be removed for an ARCA head. $250 shipped PP FF.

A dangerous combination... I picked up a new Howa 1500 barreled action in 6.5 CM and a new Teslong boroscope. Both are very awesome

So I tried out my new boroscope on my new Howa barrel and here are some of the pictures. I have not shot the Howa yet, so I wanted throw these out there before I did and see your thoughts? I scoped my Aero Precision Solus and it was basically spotless. The entire Howa barrel was like the pictures below (I only posted 4, but the entire barrel seemed to look like this in some fashion).

Thoughts? Should I just take it to the range and see how it shoots before I get all sideways?

Thanks!

Looking to get a nice spotting scope and new tripod setup. Who are the trusted "go to" guys here on the forum or other websites to get the best deals.
I'm NOT .mil or a first responder, just a normie, if that matters.

TIA

-ZA

MK 248 SOLD
40 rounds of Southwest munitions 230 berger’s. 100 TYD shipped OBO

Used LWRC REPR in pristine, like-new condition with less than 500 rounds fired. I bought this beauty brand new a few years ago, but it’s barely seen any action since—it’s just been sitting in my safe, waiting for someone who’ll truly appreciate it. Features a 16.1-inch fluted barrel for improved heat dissipation and reduced weight, chambered in 7.62 NATO (.308). NightForce NXS 3.5-15x50 scope and rings (like new condition, including glass). Built with LWRC’s legendary reliability, this rifle is practically begging to be owned and enjoyed by someone who’ll put it to good use. Serious inquiries only—reach out for more details on this incredible, barely-used setup!

LWRC REPR Rifle: $4,000 for the rifle.
NightForce NXS 3.5-15x50 FFP LV5 MOA reticle scope and rings: $1,200 for the scope and rings.
*UPDATE*: Rifle + Scope together: $4,500

Selling a like new KAC SR-25 lower with factory kac trigger, old style safety, buffer, and spring. FDE magpul miad grip replaced factory grip and a magpul STR. I will also include 2x 10 round magpul mags and 1x 20 round KAC mag.

Price: 1650 shipped

Looking to dip my toes into the bolt gun world after spending all of my time in the AR world. Looking for viable options under $3k that can either be built or turnkeyed from a reputable company.

So far I’ve got the list of turnkey rifles at:
- MPA Matrix Pro PMR
- Aero Solus Competition
- Seekins Havak HIT Pro M3
- Tikka T3X Ace Target

All would be in 6.5 Creedmoor as I’ve got 2 AR10’s already chambered in that round, and good factory ammo is readily available.

I’m currently leaning towards the Seekins because of the quick change barrel option, but I’ve heard there are issues with the HIT taking pre-fits if I ever wanted to change calibers or upgrade barrels.

Are there other options I should be considering? Is it worth looking to assemble a rifle with a $3k budget?

I’ve tried searching but can’t seem to find a vendor list for custom actions here on the Hide. I’m trying to save on tax and shipping by purchasing from one place that has most of the components in stock instead of shopping at multiple places.

It’s for hunting build and I’m leaning towards a Kelbly or Impact (75 degree bolt) and a stainless barrel, not CF.

I need a better way to carry my tripod either on the front or side of my backpack. I have seen the OBI Link setup and a guy using the Spider holester for cameras. What other options are out there? Thoughts and ideas welcome.

Looking to shaver ounces off the rifle for NRL Hunter and was thinking I could remove the CRUSH IT from the rifle and mount it to the bino harness.

Any clever ideas how to mount it to either molle or straps?

Area 419 Hellfire brake, 6mm nitrided with the 1/2x28 adapter.

Looks brand new.

$125 shipped

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

EOTech 517 Holographic Weapon Sight 65 MOA Circle with 1 MOA Dot Reticle Matte AA Batteries with 7mm Raised Base - Used in great conation, NO ISSUES at all, Glass is clear - SOLD​

The longer you read, the funnier it gets... rapper Young Scooter? Not getting any older? On his birthday? Scooting from police? When he jumps a fence, breaks his leg (while scooting) and dies suddenly?

Betting that if they'd opened the door and turned the stereo down... he'd be alive today!!!

Always thought he did a great version of "At the Hop!"

Login to view embedded media
And if he had learned to hop... he'd also be alive today!

I'll have my irony "To go." Like, out the back door. Doing an impression of Jesse Owens! Who, for the record, was a runner though won gold in the Long Jump. See, if Little had been a pole vaulter or a hurdler... he'd also be alive today.

Login to view embedded media
Like I said... it's just gets funnier...

Sirhr

What is the lowest profile rear BUIS? The MagPul Pros are really low, does anyone know of any others that may have a lower profile?

For sale 320 rounds of real deal MK262. $500 shipped.

Title says it all. Will only deal with established members with positive feedback.

Clearing out some ring sets I'm not using anymore. All are used in good condition.

First up, APA (American Precision Arms) 30mm aluminum rings marked .750 on the bottom. Presumably .75" is the rail to center line on these.
$125 shipped CONUS



Next up are some Bobro vertical split 30mm aluminum rings. Distance rail top to center line on these looks about .75" as well.
$100 shipped CONUS



Now we have some of the classic steel Leupold 1" rimfire mounts that fit on an Anschutz or 3/8" dovetail. These look 1" center line to the rail top meaning these must be the "high" model.
$50 shipped CONUS



Last up, steel no name 1" rimfire rings for a 3/8" dovetail. Looks like about .7" from center line to rail top. Think I did actually buy these at a gun store years ago so they aren't air-soft, but they aren't great either.
$20 shipped CONUS

2x 10rd MDT AICS .223 magazines. These have less than 20 rounds through them. They were just never the favorite mags of my .223 and they don't fit my 350 Legend as my other .223 mags do. As such, I'm selling them in near new condition. $65 shipped CONUS



MDT Ckye-POD attachment head mount - RRS BTC 106725 - BLK. This in new in unopened box. I don't remember how I ended up with an extra one of these, but I it was in the back of my gear bin. This is basically an upgraded clamp that allows you to upgrade older Ckye-pods to the new attachment head that fits on both ARCA and picatinny rails. I'll do half retail price for such an oddball piece, $60 shipped CONUS.

Pure SKLTN stainless model 20MOA pinned rail. 24” proof carbon barrel in 6.5 Creedmoor muzzle threaded 5/8x24 barrel has 300 rounds on it. Shoots in the .3-.4 with 147 eldm sometimes smaller.
Looking for $2200 obo shipped to your ffl.

Trigger not included

Badger Ordnance USMC 34mm rings,1" height. I mounted a scope with it, but then hardly used the rifle, so they are like new.

$120 shipped.