Selling one of my later Remdef ACR handguards, it is in excellent condition and has a tight lockup to the rifle. I can get it cerakoted coyote at the buyers expense.

Price: $1500 shipped

(5) complete caliber conversions for a Dillon 650/750

40
45
38 short colt
357 (SOLD)
44 mag

includes full caliber conversion
machine conversion $150
tool head/stand
powder measures $209
dies $150
powder check $100

brand new, each conversion is $600… asking $425 shipped per conversion setup… everything you need for that conversion

I purchased a Fox Pro call from him on Sept 17th and haven’t received or heard from him. He was on SH last Sept 27th. Any help would be appreciated. Thanks Matt

Looking for Peterson 284 brass

Like new take off on brand new Scar 16s

$210 shipped to lower 48

Brand New in Box Super Precision 34mm mount. $250 to your door

Gen II Razor 4.7-27 MRAD EBR-7C reticle

Used for one PRS season. Tracks and works flawlessly. Has some minor scuffs from where the rings were, but no dents or deep scratches. no box, but has scope shade and throw lever.

Rings in the picture are sold but i have a Geissele Super Precision in FDE for $200 and Vortex Cantilever for $100 if interested.

Message me with questions
$1500 Shipped (scope)

Not much info out there yet. These should be available in a couple of weeks in Finland. ~1200 Euros. A Finnish shop has very close ties to Delta. https://www.asejaosa.fi/index.php?id_product=2054&controller=product&id_lang=1

There is also a short video in Polish Login to view embedded media
SFP. MRAD. The illumination unit should be the same as in the 1-6. Exposed locking elevation with a zero stop and a turn indicator. Three ballistic rings. Capped windage. 30 mm tube. 20 ounces. 10.4 inches.

I was on the Covfefe website yesterday to try and order some more dark roast. Come to find that the site (at present, at least) is not listing any coffee products for sale, at all. It keeps saying, "There are no products listed under this category." This, for all the different varieties of coffee. They still sell Covfefe based merch, cups, etc. etc. but no coffee. I tried to contact them but got no response.

I wonder what's up with these guys? I guess, for now (if not permanently), I'll have to pick another brand. So, either, Black Rifle Coffee (endorsed by Dana Loesch) or Blackout Coffee (sponsored by Jared Yanis of "Guns & Gadgets" fame).

Your choice?

What do precision rifles have in common with cars and motorcycles? Owners always want to add or upgrade things and my Accuracy International AXSR is no exception. I’ve noticed mounting the rifle in my Really Right Stuff carbon fiber tripod and Anvil 30 ballhead, the Cerakoting was rubbing off the chassis where it was clamped into the ballhead.

I sent out two dozen emails to gunsmiths and vendors looking for a solution. My thought was to mount an ARCA plate to the rifle’s chassis which had a built in ARCA rail, but the constant clamping of the rifle into the tripod ballhead was scratching the Cerakote finish from the rifle.

Gunsmiths and vendors were responding with no direct solution, so I managed to find an ARCA plate that was close, but then having to purchase four small proprietary fasteners for Accuracy Internationals keyslot mounting system. Four tiny screws cost almost a Franklin.

Why not a transparent plastic solution or tape, because it isn’t a great solution and looks tacky. Also, the anodized finish is more durable than Cerakote.

If you’re persistent enough you’ll eventually succeed. Matt Yore of Sawtooth Rifles responded just after I ordered my workaround solution with a part that is exactly what I was looking for. He makes an ARCA rail that fits perfectly on my AI AXSR rifle with his ARCA rail coming with the necessary proprietary fasteners. The parts are being finished and sent out to be anodized, I’ve asked if I can get “Sage Green” to match my rifle.

So, like my motorcycle and car enthusiasts, I’ll have a few more things to add to my shelf of ideas that were close or sounded good at the time, but looking forward to getting the perfect part. Matt’s ARCA rail also has stops to prevent the rifle from sliding out of the tripod mount, cool!

Hi All,

Have some extra mags for sale

(2) Accuracy International AICS 10 round 308 magazines. Asking $100 shipped for both

(3) MDT 10 round 308 Magazines. Asking $150 shipped for all 3

Hi All,

Prefit drop in barrel for AI AXMC for 6.5CM. New, unused.

Asking $900 shipped

Link to product

DPM reduced recoil kit for Sig P226.Kit is like new.In firearm less than 100 rounds.I have this kit in 3 P226’s.Decided to sell one of my P226’s and buyer wants all original parts in firearm.I have no need for this.Comes in original box.These retail for over $100. Selling for $60 shipped in conus. PPal ff,venmo,usps money order or local pick up

Looking to sell my basically new XTR with M-Brace scope mount. Mount is 1.5 high and 20 MOA with 34mm rings. The scope is a safe queen, was put in the mount and only been zeroed. 5.5-30x56 with Tremor 5 reticle. Looking for $2050 OBO shipped for both. Thanks

I have a hunting rifle that I’d like to be able to shoot from a tripod this year, but it doesn’t have a stock that will accept an arca rail. It seems like the hog saddle was the bees knees several years ago, but with the wide spread adoption of integrated mounting solutions on rifle stocks, rifle clamps have kinda died off. That said, is the hog saddle still the top of the heap for rifle clamps? Is the more budget friendly pig saddle a cost effective option? What is it giving up? Has some other clamp eclipsed the hog/pig saddle for “bang for buck” in this arena? Thanks.

For sale; Not interested in trades. $650.00
Steiner 20x80 armored military binoculars. Used. In great shape. Original box, manual, and strap in original wrapper. Tripod mount. I’ve used these for varmint hunting. Best when mounted on a tripod. They’re really big. No foreign sales. Shipping to Hawaii and Alaska extra. $650.00
View attachment IMG_3526.jpegView attachment IMG_3528.jpegView attachment IMG_3532.jpegView attachment IMG_3533.jpeg

Hey guys, need your advice. So i was FL sizing some 6.5cm brass today and i noticed i was getting a little ridge or ring on the shoulder of my brass. I can actually feel it with a fingernail, and i have never noticed this before. Decided to inspect sizing die and internally the die looks like it is “scored” or “rough” right at the shoulder. What would cause this?? If you zoom in on case you can see the “ring” or “ridge” at shoulder of case. And you can see the inside of the die as well.

This isn’t cutting it:

Login to view embedded media

For sale; not interested in trades or parting out. $2000.00
Used Leupold Mark 4 12-40x60 inverted H-36 MIL based spotting scope. Used, but in excellent condition. Has some Wyoming dust in some nooks and crannies.
Has Badger SLICK rail mount with light diffuser cover on objective. Plus multi cam cover.
No box or manual. No foreign sales. Alaska and Hawaii shipping extra. $2000.00 Shipped and insured.View attachment IMG_3536.jpegView attachment IMG_3537.jpeg

Someone is either severely retarded or the Feds are entrapping people

I am wondering if anyone has used or cares to discuss flat Coil buffer springs? What are the real world advantages (if any)?

I'm contemplating trying it out, but I want to hear from anyone else who has actually tried them vs a regular spring before I commit to buying anything.

Selling a complete NOS Remington 700 stainless receiver with Remington .308 vintage bolt. $440 obo shipped to your FFL

Selling a NOS Larue LT840 accessory rail kit.

Asking $340 shipped OBO