New unfired barrel, 20” bartlein blank, 1:10, slightly lighter contour than standard AI, .85 at the muzzle. Picked this up thinking it would be closer to factory and never got around to shooting it, just looking to get out what I have into it. $650 shipped

Area 419 arca clamp for harris, maybe for Atlas too? $75 shipped comes with locking pins installed as shown

I'm curious if any DIY'ers in here have pulled apart their Harris legs in order to rotate and/or re-tap the leg-release buttons to face inboard rather than forward. I like my Harris setups but it is annoying when the feet deploy while using any sort of barricade with the legs down. From what I understand, Badger has them made exclusively from Harris with this mod rather than modifying existing models.

I'm just wondering if anyone has actually pulled apart the legs and done this themselves.

Hey folks. Shot my first PRS a couple weeks ago and i'm looking forward to doing some more. Just started reloading. Was shooting 6.5 creedmoor but i'm transitioning to 6 GT. Looks kind of like i'll be going against the grain by loading 6 GT with H4350, but I have 8.5 lbs of it, so varget will have to take a back seat until i burn through most of this powder.

If anyone else is in the Northern Virginia area or shoots at peacemaker or quantico, or XCAL, HMU.

$135 shipped
Zelle or Venmo

New
Comes with Sinclair Speed Screw,SINCLAIR GENERATION II BENCHREST WINDAGE TOP. You get two tops. Extra EDGEWOOD SHOOTING All-Purpose Rest Top Bag. Benchrest feet. I paid over $700. I like to get $500 for it.
Thank you

Good condition Zco, 420 with spuhr 6001, Have box and paperwork that came with it. Box is a little beat up. The scope is in good condition and has very little use on it. If you would like any additional pictures or have any question feel free to ask. I will not separate or trade. $3100 shipped via UPS with insurance. I accept PayPal FF, Venmo FF, with absolutely NO NOTES, check or money order ( needs to clear before shipping). I will only deal with established members with positive feedback. Thanks

Brett

Hey guys nearing completion on my AR-10 DMRish build. For fun, for LR, for end of the world zombie scenarios, etc.

I have a Griffin suppressor so I'd be looking at a Griffin taper mount muzzle device.

My instinct wants to put their three-prong flash hider on it because it looks so damn cool, My gut says to put their paladin dual Port muzzle brake on it because it would probably help me spot my own shots the best and the suppressor could handle taming the flash, and my brain says I should probably get the best of both worlds and put on their ugly flash comp.

Of course they have a bunch of others as well. What would you guys recommend for being the best muzzle device for this build?

Staying in the scope and spotting my own shots would be a huge priority, as little muzzle flash as possible would be a secondary.

Thanks guys

$75 shipped
Zelle or Venmo

sold

For those of you who chase pigs at night and run white light / vis laser from time to time, how important is a FP visible laser to you? Or has a civ power visible laser worked fine? I'm thinking out the passenger side or bed of a SXS shooting on the move type stuff...

Been a long time since I sold my MAWL and at the moment I'm running an OTAL C (ir version) so not much to go off of from experience unfortunately but appreciate any insight

$75 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

Selling my NF ATACR 1-8 DMx reticle, mounted in a Badger Ordnance Condition 1 mount. Been to the range 3 times, sat in the safe the rest of the time. Excellent condition, no issues. Will not come with RMR unless you want it at an additional cost. Will come with all the factory stuff with the box, same for the badger mount. Selling to buy other hobby crap. $2300 shipped for the scope and mount.

No trades at all, cash only.

If you need any additional pics, let me know.

$125 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

On their way back from meeting Zelinski no less….

Ba hahahahaha… but it’s Russian disinformation. Ba hahahhaa

Step down all three commies! Call an election in England Now. And let’s get Farage in!

Sirhr

$125 shipped

Zelle or Venmo

Ok, so I'm working on getting my 650 set up to load some bulk range ammo and some precision ammo. I've been gathering all the pieces I believe I need after searching and watching videos. All ammo loaded will be used in Ar's only no bolt guns for this stuff. Im new to loading rifle on this press but have years loading 9mm on it.

What I have so far-
Dillon 1500 case trimmer
Dillon carbide 223 dies
Fosters 223 comp seating die
Armanov tool heads and lockrings
21st Century mandrel die and Black Nitrate Expander set

I was planning on setting up the one tool head to process which is what Ive see others do and recommend. Making sure I have this correct.
Universal Decapping die
Dillon sizer/Trimmer
21st Mandrel Die

Loading Die for range ammo
Dillon sizer/decapper backed out to just use decapper to clear flash hole
Powder drop with dillon measure
Powder check
Dillon seating die
Dillon crimp die

Loading Die for Accurate Ammo
Universal decapper to clean flash hole
Powder drop by hand with funnel
Foster Ultra Mic seater
Foster crimp die

Any recommendations on the best universal decapping die to use? I know dillon is supposed to be releasing their new version based off of the FW.
I still need to get two of them.
I also need to get something to swage with. Ive heard mixed things about the swage it on a 650. Seems most say its fine as long as you stop if you feel it really bind up.

So my question is, anything that anyone would do differently or change. I still haven't loaded a single round yet. I like to make sure I have everything needed and sorted out before I start something.

Selling my DDC ALG 6SM mount with Aimpoint footprint for Gen 3 Glocks, it is in like new condition and has only been mounted for fitment. Includes all hardware including the 4 screws to mount your Aimpoint.

$1000 Shipped

I have a like-new OG game changer that was used in one match. It is standard fill and still has the original wax with zero stains. Looking to get $100 shipped!

Looking to do a magnum conversion on my AI and need a bolt or bolt body. Let me know what you have

Roughly 450 rounds on this . Includes original accessories, mag, 130+- pieces 2-3x fired peterson srp brass, nrl hunter legal rear bag rider/arca rail (prohibits folding). Shot 3/4 moa with berger 140 hybrids. NO TRADES OR OFFERS PLEASE. $1350 shipped usps to your FFL from private party. Zelle

Seems like builders' kits are getting harder to come by in general, so I'm assuming this is a long shot. But I am curious, does anyone make matching small and large frame billet receiver sets with monolithic uppers and handguards with integral Arca rails?