sold

For those of you who chase pigs at night and run white light / vis laser from time to time, how important is a FP visible laser to you? Or has a civ power visible laser worked fine? I'm thinking out the passenger side or bed of a SXS shooting on the move type stuff...

Been a long time since I sold my MAWL and at the moment I'm running an OTAL C (ir version) so not much to go off of from experience unfortunately but appreciate any insight

$75 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

Selling my NF ATACR 1-8 DMx reticle, mounted in a Badger Ordnance Condition 1 mount. Been to the range 3 times, sat in the safe the rest of the time. Excellent condition, no issues. Will not come with RMR unless you want it at an additional cost. Will come with all the factory stuff with the box, same for the badger mount. Selling to buy other hobby crap. $2300 shipped for the scope and mount.

No trades at all, cash only.

If you need any additional pics, let me know.

$125 shipped
Zelle or Venmo

$125 shipped
Zelle or Venmo

On their way back from meeting Zelinski no less….

Ba hahahahaha… but it’s Russian disinformation. Ba hahahhaa

Step down all three commies! Call an election in England Now. And let’s get Farage in!

Sirhr

$125 shipped

Zelle or Venmo

Ok, so I'm working on getting my 650 set up to load some bulk range ammo and some precision ammo. I've been gathering all the pieces I believe I need after searching and watching videos. All ammo loaded will be used in Ar's only no bolt guns for this stuff. Im new to loading rifle on this press but have years loading 9mm on it.

What I have so far-
Dillon 1500 case trimmer
Dillon carbide 223 dies
Fosters 223 comp seating die
Armanov tool heads and lockrings
21st Century mandrel die and Black Nitrate Expander set

I was planning on setting up the one tool head to process which is what Ive see others do and recommend. Making sure I have this correct.
Universal Decapping die
Dillon sizer/Trimmer
21st Mandrel Die

Loading Die for range ammo
Dillon sizer/decapper backed out to just use decapper to clear flash hole
Powder drop with dillon measure
Powder check
Dillon seating die
Dillon crimp die

Loading Die for Accurate Ammo
Universal decapper to clean flash hole
Powder drop by hand with funnel
Foster Ultra Mic seater
Foster crimp die

Any recommendations on the best universal decapping die to use? I know dillon is supposed to be releasing their new version based off of the FW.
I still need to get two of them.
I also need to get something to swage with. Ive heard mixed things about the swage it on a 650. Seems most say its fine as long as you stop if you feel it really bind up.

So my question is, anything that anyone would do differently or change. I still haven't loaded a single round yet. I like to make sure I have everything needed and sorted out before I start something.

Selling my DDC ALG 6SM mount with Aimpoint footprint for Gen 3 Glocks, it is in like new condition and has only been mounted for fitment. Includes all hardware including the 4 screws to mount your Aimpoint.

$1000 Shipped

I have a like-new OG game changer that was used in one match. It is standard fill and still has the original wax with zero stains. Looking to get $100 shipped!

Looking to do a magnum conversion on my AI and need a bolt or bolt body. Let me know what you have

Roughly 450 rounds on this . Includes original accessories, mag, 130+- pieces 2-3x fired peterson srp brass, nrl hunter legal rear bag rider/arca rail (prohibits folding). Shot 3/4 moa with berger 140 hybrids. NO TRADES OR OFFERS PLEASE. $1350 shipped usps to your FFL from private party. Zelle

Seems like builders' kits are getting harder to come by in general, so I'm assuming this is a long shot. But I am curious, does anyone make matching small and large frame billet receiver sets with monolithic uppers and handguards with integral Arca rails?

Hi everyone who is making 375 SnipeTac dies, i heard Whidden has stopped making dies and Dave has not made them for a while.

Looking to get a set of 375 SnipeTac Revision 2 dies made

Cheers Bill

Hart 1.200” straight taper 5 groove 6mm, 1:7 finish at 26”.

Sold by Shad at Alabama Precision.

$400 shipped PayPal F&F.

Used in competition, various scratches etc. Includes bag rider, weights, and mag block. Have 1 original grip. First buyer can choose that or ergo zero grip. Black chassis cut for cdg hanger, gray will clear mack evo. Weight is 8#3oz with 1/2” thick weight, 7”3oz with 3/8”. NO TRADES OR OFFERS. $550 shipped each or $1000 for both, Zelle.

My question for those who are knowledgeable about wind is if you were going to dial in some wind on your windage turret, how do you go about determining how much wind you would dial?

So I have a damaged origin action. Who’s our forum rep to contact? Need to ask some questions before I see about getting it repaired

1-10 EBR-9 MRAD Vortex Gen III Razor. Few scratches on turret caps from over crowded safe. throw lever included. Glass is perfect. Have box and contents.

Mounted in 1.70 tall Badger COMM with Accessory Ring cap and original cap (NO dot or dot mount included).

$1700 Shipped
.
.

For sale Tikka t3x with Bartlein 6GT barrel. Barrel has ~1700 rounds on it and set back .065 a few days ago by Brian Allen owner of A Team in LA. Rifle has not been fired by me since chamber was set back.

Comes in an MPA BA Comp with internal (full kit) and external (2 sets) weight kits.

Cheek piece is included although not pictured.

$1400 shipped to your FFL. PayPal F&F, continental US.

Great condition, too high for me. No box. The leveling screw is included as well.

275 Shipped

Will trade for a similar quality 1.53"- 1.57" mount.