• Quick Shot Challenge: Caption This Sniper Fail Meme

    Drop your caption in the replies for the chance to win a free shirt!

    Join the contest

Filter

SOLD 5.7x28 AR-15 Upper

8” CMMG 9 twist RDB barrel and bolt (no CH)
SI port door
7” mlok handguard
No muzzle device
Aero Precision ultralight 30mm scope mount
Vortex Strike Eagle 1-8x24 (Gen 1, AR-BDC2 MOA)
Threaded 1/2-28

Accurate and reliable I just don’t use it. Probably has less than 200 rounds through it. All NFA rules apply. All items were purchased new by me.

it takes these Magazine, 5.7 AR Conversion, Gen II, 32rd | CMMG - AR 15 and AR 10 Builds and Parts

One is included with the upper. Fits any standard AR-15 lower. Works with standard buffer/spring and milspec/aftermarket triggers (I was using a Triggertech single stage). Maintains last round hold open feature.

I also have dies, brass (purchased as once fired range pickups), bullets (30gr Varmint Grenades), and ammo available as well. I will get those up later today. Surprisingly not as difficult to load for as one might think. I was getting about 2700 Ft/s with the 30’s.

$600 shipped (upper w/ bolt, mag, scope mount and scope). PPFF preferred.

Attachments

  • IMG_0276.jpeg
    IMG_0276.jpeg
    382 KB · Views: 43
  • IMG_0277.jpeg
    IMG_0277.jpeg
    387.4 KB · Views: 42
  • IMG_0278.jpeg
    IMG_0278.jpeg
    286.8 KB · Views: 38
  • image.jpg
    image.jpg
    81.1 KB · Views: 34
  • image 2.jpg
    image 2.jpg
    45.8 KB · Views: 40

Accessories MPA Lite Chassis Rem S/A

MPA folding lite chassis. Weighs around 3.8lbs. It was cerakoted by Unknown Munitions in Cobalt Kinetics Green last October and just took to range several times and one hunt trip.
Butt pad and grip where replaced after the paint job and are in great condition. Has the extended mag release also and ran my ARC mags fine. Cheeck pad could be replaced or could use a new cover. Had some dings on stock prior to cerakote. Folder hinge screws match the cerakote. (Bipod not included obviously)
Not looking for trades at all. I'm asking $775 $750 shipped firm. Please give a few days to ship.

Attachments

  • 20250326_125634.jpg
    20250326_125634.jpg
    859.4 KB · Views: 384
  • 20250326_125641.jpg
    20250326_125641.jpg
    778.2 KB · Views: 380
  • 20250326_125656.jpg
    20250326_125656.jpg
    705.6 KB · Views: 290
  • 20250326_125706.jpg
    20250326_125706.jpg
    474 KB · Views: 379

SOLD **Drop**FFP 30mm Vortex Diamondback Tactical 4-16x44 (EBR-2C MOA)

Never really saw much use. Maybe has some slight ring marks, but they are hard to see. The Glass is excellent. No box but comes with sunshade and Vortex Defender caps. Purchased new by me.

$230 Shipped. PPFF preferred.

Attachments

  • IMG_0261.jpeg
    IMG_0261.jpeg
    336.1 KB · Views: 27
  • IMG_0262.jpeg
    IMG_0262.jpeg
    303 KB · Views: 26
  • IMG_0263.jpeg
    IMG_0263.jpeg
    287.7 KB · Views: 27
  • IMG_0264.jpeg
    IMG_0264.jpeg
    265.4 KB · Views: 26
  • IMG_0265.jpeg
    IMG_0265.jpeg
    565 KB · Views: 26
  • IMG_0266.jpeg
    IMG_0266.jpeg
    667.2 KB · Views: 25

Optics Zeiss Victory SF 8x32 Binoculars REDUCTION

This is a set of like new Zeiss Victory SF 8x32 binos - phenomenal glass with wide FOV. If you are looking for something more compact/portable than the traditional 10x42's then the Victory SF represent the best glass from Zeiss to date, stunning image. 21.2oz and 465.7' FOV at 1000 yards!

$2500 binos for $1395 to the first "I'll take it". PP FF, Venmo or MO, even check (but wait for clearance)

These were used for testing so have seen little use, they are like new - perfect glass and no major scratches or blems I can see. Selling to fund other projects, might consider trade for other optics or LMT MRP-L stripped uppers, or?

50779639-6CA8-4B83-8084-81271D5B40E2.jpg
351900F7-7359-4331-98D1-3136C548549A.jpg
16C0CEE1-BDC5-431C-8F69-2CE96C3DD23A.jpg
35C8AA1E-E9AA-486B-8E85-2D6FB5E4C9AD.jpg
6536B27A-CB48-4CD0-BC1E-6B66D4CABBA6.jpg
239C2E75-3039-4259-A21F-AB01A898E5CE.jpg

SOLD Remington 700 LA

I am selling a Remington 700 LA (Std bolt face), complete with bolt, bolt release, trigger, recoil lug, hardware, and bottom metal. This action was worked on by Score High Gunsmithing in Albuquerque, NM; however, I didn't have it done, so I can't say exactly what they did. The face of the receiver definitely looks like it has been trued, and the lugs have been lapped. They also pinned the recoil lug. Trigger breaks right at 2lbs.

Must ship to FFL from an individual. $550 shipped, PPFF preferred. I will also accept personal check or MO, but will hold item until clear and/or money in hand.

Attachments

  • IMG_0272.jpeg
    IMG_0272.jpeg
    226.8 KB · Views: 124
  • IMG_0271.jpeg
    IMG_0271.jpeg
    300.8 KB · Views: 123
  • IMG_0270.jpeg
    IMG_0270.jpeg
    589.7 KB · Views: 115
  • IMG_0269.jpeg
    IMG_0269.jpeg
    606.6 KB · Views: 107
  • IMG_0268.jpeg
    IMG_0268.jpeg
    618.4 KB · Views: 104
  • IMG_0267.jpeg
    IMG_0267.jpeg
    710.3 KB · Views: 107
  • IMG_0273.jpeg
    IMG_0273.jpeg
    506.7 KB · Views: 102
  • IMG_0274.jpeg
    IMG_0274.jpeg
    726.4 KB · Views: 98
  • IMG_0275.jpeg
    IMG_0275.jpeg
    759.6 KB · Views: 128

Firearms Custom PRS Ready 6.5 CM - KRG, Tuebor, Bartlein - Trade/Sale Pending

I switched things around a little bit so this one is up for grabs in a slightly different configuration than before. The KRG is in good condition, I just need to get the dirt off of it that is in the picture. I will get it cleaned up prior to shipping.

Tuebor Raider Action
Bartlein MTU 24" 1:7.5 twist, threaded 5/8x24, cerakoted black
APA Fat Bastard Break Gen 2
TT Diamond
Round Count 330
KRG Gen 4 (aluminum) W3 Folder w/ front spigot pic rail
Weight ~15lbs

Optics, rings, and bipod are not included but can be added for extra.

I have a ton of ammo that can be sold to the buyer of the rifle at a discount if desired.

$2,500 shipped. $1,000 for the chassis and $1,600 for the barreled action if split.
Only trades would be mil/mil FFP optics (can add cash if needed).


IMG_3927.jpeg

SOLD MPA Matrix Pro Chassis New Cerakote

Price: $1100 firm
Shipping: UPS to lower 48, buyer pays
Location: Metro Atlanta for local pickup

SEND ME A PM TO COMMUNICATE! I do not use the comments section on listings to answer questions or engage.

MPA Matrix Pro Chassis was purchased in 2023 and used in about 20 matches. Freshly applied Tuff Armor Black Cerakote on 1/9/2025 by a certified applicator and it looks brand new. It was bedded for an Impact 737R action, but the bedding material has been removed so you can bed whatever action you desire. Details of the chassis are as follows:
  • Adjustable bag rider
  • Adjustable length of pull
  • Adjustable padded cheek riser
  • MPA vertical 3 grip installed
  • Finger block
  • Thumb rest
  • 2 round holder
  • GrayOps Matrix Pro external weights (aluminum)
  • Front bridge with Picatinny rail
  • Full length magwell plate
  • Adjustable magazine slide
  • Matrix Pro RAT RAIL
It will come with the accessories shown in the plastic container, which includes an MPA data card, two thumb rest variants, two finger block variants, a stubby bag gripper for the magwell, and MPA vertical 2 grip.

2025-01-10 17.40.18.jpg


2025-01-10 17.41.22.jpg


2025-01-10 17.40.23.jpg

2025-01-10 17.40.31.jpg

2025-01-10 17.40.47.jpg

2025-01-10 17.41.26.jpg

2025-01-10 17.41.35.jpg

2025-01-10 17.42.08.jpg

Accessories Geisselle uppers , trade for mil scopes

SPF New barrel shipped. Cost me with tax and shipping These are shooting sub 1/2” for people. SPF

IMG_1948.jpeg


2 new 16” upper nano coated etc. $900 to your door $800 without muzzle device. $600 without muzzle device or BCG

IMG_1957.jpeg

IMG_1949.jpeg

Trade for quality mil scope with preference towards Nightforce nx8 or ATACR or vortex 1-10

Question for you reloaders on Load Dev

Been working on reloads for a 6.5CM.
First ill say I am still new with a lot of this and this is a hunting rifle. Not a precision rifle or a really super high end rifle either. But one that I do enjoy to shoot and hunt with.

Finally starting to get somewhere with help from one of the members here. Has been a huge help.
But I also have another question.
When you head to the range and start shooting. Do you start out cold. and record those groups.
Or do you run some sighters or foulers through the gun to get some heat in it before shooting groups for recording data?

The reason I ask is the 3 charge groups I shot last night all were somewhat consistant.
But the first group the first shot I made went low and opened the group up.
taking that one shot out the group and mean radius of the group would be much much smaller.
So just got me thinking if I should run this group again to see what it does if the rifle has some heat in it first.
Here is my original target.
shared_image.png

Here is the same target with the 1st target shot dropped. Which was the first shot made with the rifle cold.
shared_image (1).png

Right now just trying to get a charge weight found so I can start working on seating depth tests to see if I can get a smaller group.

Firearms Reduced-Sig Cross Sawtooth with 24" Proof Research barrel 7mm PRC LNIB

As above. This rifle has 123 rounds of Hornady 180 grain ELD down the pipe and shoots sub moa. I bought it for a purpose, to shoot to a mile, I achieved that purpose, and its time to move on. At 75 I just dont appreciate the blast anymore though iwth the Fat Bastard recoil is minimal. I never appreciated a folding stock until I tried one, the best if you need to pack it. Comes with forward Pic. rail and factory muzzle brake. The folding stock is nice for packing, the tape is athletic type and will come right off. Fully adjustable for comb height and LOP. This rifle retails for $2699 with tax $2940 and FFL fee on top of that. $2300 $2200 TYFFL obro. FTF in Oklahoma. Not looking for trades but never hurts to ask.

Scope and bipod not included but could be negotiated for. Will include the $200 APA Gen IIII Fat Bastard for $100 with the rifle. Comes with box, rifle and muzzle break. I have a case of Hornady 180 grain ELD that the buyer has first choice on.

1743022468507.png

1743022500147.png

1743022540511.png

1743022569248.png

1743022597377.png

1743022618854.png

1743022642678.png

1743022702234.png

1743022742812.png

Optics Leupold RX-2800 tbrw

Selling my used Leupold rangefinder

This thing works pretty dang good. Only reason is I got new sig 10ks


These are seriously underrated
The laser on this seems to be smaller than most as for a handheld it does a great job picking up targets at matches with ease . Works great zero problems . Spend 90% of its life in my match bag just incase

$210 shipped paypal F&F

Attachments

  • IMG_0985.jpeg
    IMG_0985.jpeg
    514.9 KB · Views: 13

Top MS -13 leader arrested in Virginia! Seriously, no old lady getting beat up this time .

Hiding in a deep holler under a natural limestone outcrop with food and water .

No that part is a joke - he was in Woodbridge VA just south of DC. Had no reason to hide until now

SOLD Arken SH-4J GENII 6-24x50 BNIB

Brand new in the box, includes all the stuff that comes in there, plus the Arken throw lever I added. Scope, sunshade, bikini covers, stickers, cleaning cloth, battery, Arken throw lever. Sorry the sunshade's not in the pics but it IS included, and brand new, just like everything else. Reticle is the VPR (Christmas tree/precision one, not the hunter style), in MILs.

Second gen with the Japanese glass. I still have one of these on a gun but I'm spring cleaning over here. This is a great scope for the dough.

SOLD

IMG_8820 Large.jpeg

Attachments

  • IMG_8815 Large.jpeg
    IMG_8815 Large.jpeg
    204.4 KB · Views: 39
  • IMG_8816 Large.jpeg
    IMG_8816 Large.jpeg
    249.3 KB · Views: 39
  • IMG_8818 Large.jpeg
    IMG_8818 Large.jpeg
    156.2 KB · Views: 38
  • IMG_8819 Large.jpeg
    IMG_8819 Large.jpeg
    188.3 KB · Views: 38

Optics Sig Tango MSR 1-8x24 with Cantilever Mount NIB

Sig Sauer Tango-MSR 1-8 LPVO with BDC8 reticle, SFP. Horseshoe is illuminated and bright AF, works really well as a QCB red dot with lots of magnification. Huge eyebox and little distortion, way better than the 1-6 Tango. Just went in a different direction with the project.

Scope was mounted and sat on a rifle for one range trip, maybe 20 rounds. Basically brand new. Comes with scope, mount, flip covers, paperwork, battery, cleaning cloth, operator-grade Sig Sauer sticker, and original box. Coyote brown makes it more accurate. Not really, but you'd think it would do something to justify the $100 higher MSRP, lol.

$380 $325 shipped, DM me if you are interested in buying, PayPal FF or Venmo preferred. I pack things well and ship them quickly. Thanks!


IMG_8814 Large.jpeg

Attachments

  • IMG_8807 Large.jpeg
    IMG_8807 Large.jpeg
    248.3 KB · Views: 34
  • IMG_8809 Large.jpeg
    IMG_8809 Large.jpeg
    182.4 KB · Views: 43
  • IMG_8810 Large.jpeg
    IMG_8810 Large.jpeg
    216.5 KB · Views: 44
  • IMG_8811 Large.jpeg
    IMG_8811 Large.jpeg
    206.7 KB · Views: 44
  • IMG_8812 Large.jpeg
    IMG_8812 Large.jpeg
    189 KB · Views: 33
  • IMG_8813 Large.jpeg
    IMG_8813 Large.jpeg
    195.6 KB · Views: 34