Works great, just no longer need.

$150 shipped PayPal FF

2 500 count boxes of Sierra .22 Cal 69gr TMK. Still in the plastic.
Brand new unopened.

$300 shipped

New call, went out once with a buddy and didn’t enjoy the experience so I never used my call.

$200 shipped PayPal FF

Used one time. I like my LMT better. Like new condition.

$125 shipped PayPal F&F or Venmo gift.

I have 199 pieces of alpha dasher brass. All same lot. One unopened box. One box of 99 that is 1x fired, which has been cleaned and deprimed.

*SOLD*

BNIB

Nightforce NX8 4-32x50mm F1 , MOA-XT (C652) - $1700 (1 unit)

Nightforce NX8 4-32x50mm F1 , MOAR (C624) - $1600 (2 units)

Nightforce NXS 5.5-22x56 MOAR (C434) - $1600 (1 unit)


Payment:
Zelle / Wire / PayPal
Other methods available on request.

Shipping:
Buyer pays shipping. Tracking number provided. UPS

Contact:
Email: [email protected]
Text: 302-493-5647
Or just send a DM here

I have always wanted a 9 mm upper or 9 mm subgun for range plinking. I was never the biggest fan of straight blowback uppers for multiple reasons, most namely they are loud, and they tend to have a higher recoil impulse than locked breech systems. I also didn't want to deal with a mag well adapter or dedicated lower.

Anyways Midway had a sale on CMMG radial delayed uppers several months ago, and I picked up a 5" complete Banshee upper. I finally got around to shooting it.

In short, it runs great. Digested 115 and 147 hr loads without issue. The CMMG magazine that goes in a standard AR magwell worked without a hitch, and the BHO worked too. It suppressed reasonably well with a Primal 46.

I used it on a standard AR lower with a Geiselle SD3G trigger and standard carbine buffer. There were no trigger issues either.

I didn't shoot it enough to conclusively establish it's reliability but so far it has been off to a solid start.

Sold to Matty.

I have an unused Mark 7 Apex 10 press for sale. I got this a while back, assembled it and never got around to using it. It's setup for 9mm, no dies included. It also has a Mr. Bullet feeder. Price is $2000 shipped and insured in conus. I will ship it in three separate boxes and provide tracking.

Selling brand new in plastic Leupold Mark 4 6-24 PR2 reticle.

$1200 shipped

I’m working with a guy who is trying to potentially bring a WMRF to market. Price point goal would be around $1000 or so, so obviously the idea is to have what’s needed without extra fluff to add cost. I was thinking a 2K laser (no one is really shooting past that anyway, and if you are, step up to the Vortex), wired remote with a 90* plug, and the possibility of a small second screen that could be mounted on the rifle itself similar to a dope card, so you could stay on glass while ranging. What are you guys looking for in a more budget package?

MDT ACC Gen 1 in FDE. Got a few nicks on it. Comes with action screws. Decided to stay with KRG. $Traded to ballisticdaddy

Will trade for a KRG Whiskey 3.

FS/FT

JP Modular trigger, curved, with JP ambidextrous safety selector. single stage
$175 shipped SPF

Triggertech competitive single stage 3lbs, curved
$125 shipped SOLD

Timney competition single stage, curved
$125 shipped

Trades:
105 berger hybrids
109 berger hybrids
Cyke pod
30 cal ACE brake
30 cal area 419 hellfire match
SAC barrel vise
Offer up!

Wtb black Hawkins one piece 34mm 0 moa cant with cantilever pic rail.

Just purchased here from another hide member. I thought it would fit my Sierra 5 but it does not. Pm me for pyt options (PP, CashApp, etc)

Hey I have a black A698 which is ultra mount 34mm 0moa 1.90. I’m looking for a FDE A696 which is 34mm 0moa 1.54 height.

Would sell the black one for $200. It’s basically brand new.

Shot this match on Fri, and RO’d on Sat. Man was it hot. July in NC can be brutal to shoot in, and Mother Nature set a high bar. Overall I thought the match was a good one. It was very challenging, but doable, much like the May match, but I felt this match was a couple notches harder. Many of the targets were in vegetation, and they were much harder to pick up, especially under the stress and pressure of being on the clock. A few of the targets were just inside of the shade of a tree line, and they would simply disappear. It was so important to memorize the exact placement during your walk through. As a shooter, it was very challenging, but fun. As an RO, I had a good time with everyone. Shooters were serious enough to do the best that they could, but also, they were relaxed enough to joke around and have some fun. I was at stage 4, with the blue barrels and a split rail fence. An invisible wind made the 420 yard target a little tougher than it appeared. I wish I had a dollar for every bullet that slid by the right edge of the target. I’d be rich. Every time I shoot in central NC, I am blown away how good the boys from Bragg are. Impressive to say the least. Just know that you are an inspiration to us old guys! Next one is in September. Y’all come on!

Fehu outdoors tilpasse back pack
Used for NRL hunter matches
No rips, tears or wear
$280 shipped - SOLD

I am having issues with an MPA long action chassis dropping the mag under recoil when rounds are in the mag. When it’s empty it stays latched just fine.

Rifle is a 300prc, using CIP+ mags. Mag latch is adjusted to have the mag just below the bolt. Not sure what to try to keep the mag securely latched.

Any advice would be much appreciated.

Master Fudd to rule them all!!


Login to view embedded media

Have a Spuhr SP-6002 used in good condition. 36mm 0 MOA 1.5 tall.

$300 to me shipped to you.

Looking to sell a thunder beast 50%off certificate, it is good of any suppressor under $2500.

Asking $300 payment via paypal friend and family.

Sold!

Great shape. 3.5-18 k318i SKMR3 reticle. $SOLD shipped

Upper is factory FDE from KAC
Lower is cerakote job done by D Wilson.

200 rounds of Berger 130gr AR hybrids through the barrel.

$6200 $6000 shipped and insured to your FFL.

I am not looking for any trades right now.

Thanks.

Looking to purchase a Rimx action or possibly a barreled action. Have cash in hand I will be picky about the barreled action

* Note to mods, I purchased contributor status a few days ago but my badgers don’t show it yet.

This is a like new lightly used upper receiver with only approximately 150 rounds on it. Note this is not a thermofit upper. The face has not been lapped or anything and no loctite 620 or other bedding compounds have been used with it.

Looking for $150 including shipping

Product description from Vltor:

The Vltor MUR-1A (Modular Upper Receiver) is a premium, Mil-Spec flat-top upper receiver designed for AR15/M16/M4 rifles and carbines, crafted from 7075-T6 aircraft-grade aluminum forgings for superior strength and durability. Its key features include a thicker receiver wall for enhanced rigidity, which improves accuracy and reliability while extending the lifespan of interfacing components like the bolt carrier group and barrel assembly. The MUR-1A comes fully assembled with a pinned shell deflector and forward assist, M4 feed ramps for reliable feeding, and a hard-anodized black finish (MIL-A-8625 Type III Class 2) with a dry lube coating for smooth operation and corrosion resistance. Each unit is stress-relieved, heat-treated, double-aged, and cryogenically treated to ensure dimensional stability and precision, with hand-finishing and 100% quality control checks to maintain exact tolerances. Weighing approximately 9.8 oz, it’s compatible with Mil-Spec lowers and barrels.













Accepting paypal, venmo, or zelle